• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.12
• /
• pp.830-842
• /
• 2015

This paper aims to develop a SI(structural identification) technique using the kinetic energy optimization technique(KEOT) and the direct matrix updating method(DMUM) to decide on optimal location of sensors and to update FE model respectively, which ultimately contributes to a composition of more effective SHM. Owing to the characteristic structural flexing behavior of cable bridges, which makes them vulnerable to any vibration, systematic and continuous structural health monitoring (SHM) is pivotal for them. Since it is necessary to select optimal measurement locations with the fewest possible measurements and also to accurately assess the structural state of a bridge for the development of an effective SHM, a SI technique is as much important to accurately determine the modal parameters of the current structure based on the data optimally obtained. In this study, the KEOT was utilized to determine the optimal measurement locations, while the DMUM was utilized for FE model updating. As a result of experiment, the required number of measurement locations derived from KEOT based on the target mode was reduced by approximately 80 % compared to the initial number of measurement locations. Moreover, compared to the eigenvalue of the modal experiment, an improved FE model with a margin of error of less than 1 % was derived from DMUM. Finally, the SI technique for long-span bridges proposed in this study, which utilizes both KEOT and DMUM, is proven effective in minimizing the number of sensors while accurately determining the structural dynamic characteristics.

• Structural Monitoring and Maintenance
• /
• v.5 no.1
• /
• pp.93-110
• /
• 2018

In order to provide a novel strategy for long-span bridge health monitoring system design, this paper proposes a novel ultimate bearing capacity ratios based bridge internal force monitoring design method. The bridge ultimate bearing capacity analysis theories are briefly described. Then, based on the ultimate bearing capacity of the structural component, the component ultimate bearing capacity ratio, the uniformity of ultimate bearing capacity ratio, and the reference of component ultimate bearing capacity ratio are defined. Based on the defined indices, the high bearing components can then be found, and the internal force monitoring system can be designed. Finally, the proposed method is applied to the bridge health monitoring system design of the second highway bridge of Wuhu Yangtze river. Through the ultimate bearing capacity analysis of the bridge in eight load conditions, the high bearing components are found based on the proposed method. The bridge internal force monitoring system is then preliminary designed. The results show that the proposed method can provide quantitative criteria for sensors layout. The monitoring components based on the proposed method are consistent with the actual failure process of the bridge, and can reduce the monitoring of low bearing components. For the second highway bridge of Wuhu Yangtze river, only 59 components are designed to be monitored their internal forces. Therefore, the bridge internal force monitoring system based on the ultimate bearing capacity ratio can decrease the number of monitored components and the cost of the whole monitoring system.

• Smart Structures and Systems
• /
• v.16 no.4
• /
• pp.607-621
• /
• 2015

Wireless sensor technology has been opened up numerous opportunities to advanced health and maintenance monitoring of civil infrastructure. Compare to the traditional tactics, it offers a better way of providing relevant information regarding the condition of building structure health at a lower price. Numerous domestic buildings, especially longer-span buildings have a low frequency response and challenging to measure using deployed numbers of sensors. The way the sensor nodes are connected plays an important role in providing the signals with required strengths. Out of many topologies, the dense and sparse topologies wireless sensor network were extensively used in sensor network applications for collecting health information. However, it is still unclear which topology is better for obtaining health information in terms of greatest components, node's size and degree. Theoretical and computational issues arising in the selection of the optimum topology sensor network for estimating coverage area with sensor placement in building structural monitoring are addressed. This work is an attempt to fill this gap in high-rise building structural health monitoring application. The result shows that, the sparse topology sensor network provides better performance compared with the dense topology network and would be a good choice for monitoring high-rise building structural health damage.

• Smart Structures and Systems
• /
• v.18 no.2
• /
• pp.317-334
• /
• 2016

Structural Health Monitoring System (SHMS) works as an efficient platform for monitoring the health status and performance deterioration of engineering structures during long-term service periods. The objective of its installation is to provide reasonable suggestions for structural maintenance and management, and therefore ensure the structural safety based on the information extracted from the real-time measured data. In this paper, the SHMS implemented on a world-famous kilometer-level cable-stayed bridge, named as Sutong Cable-stayed Bridge (SCB), is introduced in detail. The composition and core functions of the SHMS on SCB are elaborately presented. The system consists of four main subsystems including sensory subsystem, data acquisition and transmission subsystem, data management and control subsystem and structural health evaluation subsystem. All of the four parts are decomposed to separately describe their own constitutions and connected to illustrate the systematic functions. Accordingly, the main techniques and strategies adopted in the SHMS establishment are presented and some extension researches based on structural health monitoring are discussed. The introduction of the SHMS on SCB is expected to provide references for the establishment of SHMSs on long-span bridges with similar features as well as the implementation of potential researches based on structural health monitoring.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.281-286
• /
• 2011

Station structures, one of important infrastructures, which have been being operated since the 1970s, are especially vulnerable to even the medium-level earthquake and they could be damaged by long-term internal or external vibrations such as ambient vibrations. Recently, much attention has been paid to real-time monitoring of the fatal defect or long-term deterioration of civil infrastructures to ensure their safety and adequate performance throughout their life span. In this study, a structural health monitoring methodology using acceleration responses is proposed to evaluate the health-state of the station structures and to detect initial damage-stage. A damage index is developed using the acceleration data and it is applied to outlier analysis, one of unsupervised learning based pattern recognition methods. A threshold value for the outlier analysis is determined based on confidence level of the probabilistic distribution of the acceleration data. The probabilistic distribution is selected according to the feature of the collected data.

• Smart Structures and Systems
• /
• v.5 no.4
• /
• pp.369-379
• /
• 2009

The sudden collapse of Interstate 35 Bridge in Minneapolis gave a wake-up call to US municipalities to re-evaluate aging bridges. In this situation, structural health monitoring (SHM) technology can provide the essential help needed for monitoring and maintaining the nation's infrastructure. Monitoring long span bridges such as cable-stayed bridges effectively requires the use of a large number of sensors. In this article, we introduce a probabilistic approach to identify optimal locations of sensors to enhance damage detection. Probability distribution functions are established using an artificial neural network trained using a priori knowledge of damage locations. The optimal number of sensors is identified using multi-objective optimization that simultaneously considers information entropy and sensor cost-objective functions. Luling Bridge, a cable-stayed bridge over the Mississippi River, is selected as a case study to demonstrate the efficiency of the proposed approach.

• Structural Engineering and Mechanics
• /
• v.23 no.1
• /
• pp.75-95
• /
• 2006

Two-step identification approaches for effective bridge health monitoring are proposed to alleviate the issues associated with many unknown parameters faced in real structures and to improve the accuracy in the estimate results. It is suitable for on-line monitoring scheme, since the damage assessment is not always needed to be carried out whereas the alarming for damages is to be continuously monitored. In the first step for screening potentially damaged members, a damage indicator method based on modal strain energy, probabilistic neural networks and the conventional neural networks using grouping technique are utilized and then the conventional neural networks technique is utilized for damage assessment on the screened members in the second step. The effectiveness of the proposed methods is investigated through a field test on the northern-most span of the old Hannam Grand Bridge over the Han River in Seoul, Korea.

• The Journal of Korean Physical Therapy
• /
• v.1 no.1
• /
• pp.27-45
• /
• 1989

This study aims at helping cerebrally palsied children to overcome and minimize their sufferings, inducing them to perform ordinary activities of daily living for themselves by coducting ADL Tests which are fundamental activities in daily life and presenting treatment plan for their overall rehabilitation and basic data for achieving the training objective. For that purpose, 173 cerebrally palsied children were selected and given ADL performance Tests from Dec. 1987 to Oct. 1988 and the following results were obtained. 1. Correlation coefficients for each ADL category indicated significant statistical value at .01 level. 2. Correlation coefficient between school-year variable and ADL category variable was significant at .01 level. 3. Correlation between age variable and ADL variable category proved significant at .01 level as well. 4. Correlation coefficients between each category in terms of functional state of extremities were significant at .01 level. 5. The difference in ADL achievements between each category by school year were as follows ; 1) In the category of meeting nature's tall, the age span of more than 4 school years showed statistical significance. 2) In the category of putting off and on clothing, the age span of 3 school years indicated statistical significance. 3) In taking meals statistical significance was found in the age span of 4 school years. 4) In finger movements the age span of more the 4 school years indicated statistical significance. 5) In walking activities statistical significance was noticed in the age span of 2 or 3 school years. Besides, in category by school year, and exceptional case was noticed that the 6th graders were lower than the 5th graders in self-reliance rate. 6. the difference in ADL achievements by type of palsy, children of triplegia were the lowest, while those of monoplegia were the highest. 7. The difference in ADL achievements by kind of palsy, patients of athetosis showed lower rate of self-reliance than those of spasticity, and particularly the latter showed a high rate of self-reliance in taking meals$(83.5\%)$. The former were relatively low in self-reliance and lowerst in meeting nature's call $(59.8\%)$.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.1
• /
• pp.138-149
• /
• 2014

This study proposes an estimation method of strain distribution for multi-span steel beam structure under unspecific loading conditions. The estimation method in this paper employs the curve fitting using the least square method from measured strain data, not analytical method. To verify the proposed estimation method, a static loading test for multi-span steel beam on which distributed and concentrated loads act was conducted. The strain data for verification was measured by FBG sensors that have multiplexing technology. The analysis of the accuracy of strain estimation for distributed and concentrated loads and the errors by considering the number of measured points used in the estimation were conducted. In the maximum strain points, the strains could be estimated with the errors of 5.89% (loading step 1) and 6.26% (loading step 2). In case of decreasing the number of sensors, it was also confirmed that the errors increased (0.26~0.37%). Through the curve fitting method, it is possible to estimate the strain distribution (maximum strains and their locations) of multi-span beam for unspecific loads and go over the limit of the analytical estimation method which is suitable for specific distributed loads.

• The Journal of the Korean dental association
• /
• v.49 no.10
• /
• pp.584-598
• /
• 2011

The age structure has been experiencing substantial change due to the decreased birth rate as well as the increased life expectancy. Gorge Magnus, an English economist, casts warnings of population ageing which has the potential of huge socioeconomic impact human society has never experienced before. The prediction that proportion of elderly people in need of oral health care will increase substantially is a new challenge to dentists in the future. The old paradigm that the aged person is just the person who was born earlier and needs the same conventional oral health care should be shifted to the new one. Elderly people tend to express their political interest related with health care system by actively participating in the national elections. The need to sustain economic status for the extended life span makes them seek eagerly esthetic health care to maintain sound social function. Most of them are under multiple chronic diseases and take related medicines. In addition, many studies report about mental change as well as physical change among the aged people. Since the prevalence of dental diseases among the aged is higher than other chronic devastating diseases, the aged seeking oral health care will increase. The aged who has different physical and psychological status as well as chronic disease and related medicine will show unexpected response to the conventional oral health care. In addition, the impact of tooth loss is substantial physically, mentally and emotionally. Dentist should prepare different approaches for the elderly dental patient.