• Journal of Korea Game Society
• /
• v.16 no.6
• /
• pp.101-110
• /
• 2016

Currently, fires caused by fine dust particles are attracting people's attention increasingly. Fine dust particles are $2.5{\mu}m$ (micrometer) in diameter which cannot be seen by the naked eyes could penetrate deeply into the lungs and cause health problems. Although people are aware of the precautions against fine dust particles, they do not take actions because they are less aware of the hazards that fine dust particles can do. This study aims to investigate the effects of artificial and natural causes of fine dust particles. In order to improve awareness of fine dust particle prevention, the <우마이() Escape> board game was developed and tests were carried out to 20 children to find out the educational effects of the board game.

• Journal of Mechanical Science and Technology
• /
• v.18 no.12
• /
• pp.2182-2189
• /
• 2004

In the recent years, environmentally conscious design and manufacturing technologies have attracted considerable attention. The coolants, lubricants, solvents, metallic chips and discarded tools from manufacturing operations will harm our environment and the earth's ecosystem. In the present work, the Tukey method of multiple comparisons is used to select the minimum level of coolant required in a turning process. The amount of coolant is varied in 270 designed experiments and the parameters cutting temperature, surface roughness, and specific cutting energy are carefully evaluated. The effects of coolant mix ratio as well as the amount of coolant on the turning process are studied in the present work. The cutting temperature and surface roughness for different quantity of coolant are investigated by analysis of variance (ANOVA) - test and a multiple comparison method. ANOVA-test results signify that the average tool temperature and surface roughness depend on the amount of coolant. Based on Tukey's Honestly Significant Difference (HSD) method, one of the multiple comparison methods, the minimum level of coolant is 1.0 L/min with 2% mix ratio in the aspect of controlling tool temperature. F-test concludes that the amount of coolant used does not have any significant effect on specific cutting energy. Finally, Tukey method ascertains that 0.5 L/min with 6% mix ratio is the minimum level of coolant required in turning process without any serious degradation of the surface finish. Considering all aspects of cutting, the minimum coolant required is 1.0 L/min with 6% mix ratio. It is merely half the coolant currently used i.e. 2.0 L/min with 10% mix ratio. Minimal use of coolant not only economically desirable for reducing manufacturing cost but also it imparts fewer hazards to human health. Also, sparing use of coolant will eventually transform the turning process into a more environment-conscious manufacturing process.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.2
• /
• pp.107-115
• /
• 2015

As TBM construction method is widely applied to construct underground transmission lines, increasing attention has been drawn to SFRC(steel fiber reinforced concrete) segment with respect to structural characteristics. Health hazards of electromagnetic wave which the underground transmission lines emit has emerged, and there is a concern that electromagnetic wave can be amplified because a segment characteristic such as electrical conductivity is changed by steel fibers. In order to analyze correlation between steel fiber dosage and electromagnetic wave, the specimens were fabricated on three conditions to perform experimental tests. From the measured data, it is proven that there is no correlation between the electromagnetic wave and steel fiber reinforced concrete.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.6
• /
• pp.865-871
• /
• 2006

Signs of dental discolouration, difficulty in mastication, bony exostosis and debility were observed in cattle from Qingtongxia Ningxia, China where fluoride concentration in drinking water, soil, fodder, serum, bone, teeth, haircoat and urine were significantly higher than the corresponding health site. The problem of fluorosis in beef cattle is attributable to water containing toxic levels of fluoride. The objective of this paper was therefore to evaluate the influence of fluoride on erythrocyte parameters in cattle under high fluoride and low selenium conditions, as well as the protective efficacy of selenium exposure in feedstuff for bovine endemic fluorosis. Sixteen 6 to 7 year-old high fluoride beef cattle were randomly allotted into two groups each with eight cows: high fluoride control group, and supplemented with 0.25 mg/kg selenium per day for 83 days respectively. In addition, eight 6 to 7 year-old normal control beef cattle were selected from a non-high fluoride site. Blood samples were collected on day 0, 30 and 83 for erythrocyte parameters analysis and scanning electronic microscopy. The results indicated that erythrocytes, hemoglobin, packed cell volume values and $Na^+-K^+$ ATPase activity from affected cattle on the high fluoride site were significantly reduced during the period as compared with the corresponding samples of normal control cattle, a great number of echinocytes were present in peripheral blood, and subsequent anaemia. However, affected cattle exposed to selenium revealed increasable erythrocyte parameters, the extent of elevation in these values being dependent on the duration of supplementation with selenium. These findings suggest that fluoride exposure can cause erythrocyte damage, whereas selenium supplementation can antagonize fluoride-induced generation of free radicals and cumulative effects of lipid peroxidation in erythrocytes. Selenium supplementation may help to alleviate the possible hazards associated with bovine endemic fluorosis.

• Journal of Powder Materials
• /
• v.22 no.4
• /
• pp.234-239
• /
• 2015

Electronic products are a major part of evolving industry and human life style; however most of them are known to emit electromagnetic waves that have severe health hazards. Therefore, different materials and fabrication techniques are understudy to control or limit transfer of such waves to human body. In this study, nanocomposite powder is dispersed into epoxy resin and shielding effects such as absorption, reflection, penetration and multiple reflections are investigated. In addition, nano size powder (Ni, $Fe_2O_3$, Fe-85Ni, C-Ni) is fabricated by pulsed wire evaporation method and dispersed manually into epoxy. Characterization techniques such as X-ray diffraction, Scanning electron microscopy and Transmission electron microscopy are used to investigate the phase analysis, size and shape as well as dispersion trend of a nano powder on epoxy matrix. Shielding effect is measured by standard test method to investigate the electromagnetic shielding effectiveness of planar materials, ASTM D4935. At lower frequency, sample consisting nano-powder of Fe-85%Wt Ni shows better electromagnetic shielding effect compared to only epoxy, only Ni, $Fe_2O_3$ and C-Ni samples.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.5 no.2
• /
• pp.42-58
• /
• 1999

Packaging materials and articles that are used in food contact applications can transfer constituents in the foodstuffs. This kind of risk of possible health hazards to consumers has been generally recognized for a long time with the consequence of establishing corresponding food regulations in most developed countries. However, the language of these laws, their interpretation, and their level of enforcement vary from country to country. Accordingly, the actual migrating levels from packaging materials can be varied depending on the migration testing methods as prescribed in the national legislation in each countries. Therefore, there are needs of elimination of non-tariff trade barriers raised by sanitary and phytosanitary or technical measures under the Final Act of the UR Agreement. In this connection, the EU and USA are currently in an ongoing process of legislation harmonization to overcome potential barriers to free trade. In general, regulations governing component transfer in the USA are more complicated and comprehensive than similar regulations in Europe. In future, standard migration testing procedures for microwave heat susceptor materials and for the use of fatty food simulant should be established and also harmonized among countries. The objective of this investigation is to compare the current regulations for migration testing for plastic containers and packaging materials in USA, EU and Korea or Japan. For those regulations, Korean standards are required to be kept up with the international standards. By doing this, the related Korean regulation could be amended along with the worldwide progress for harmonization.

• Journal of Preventive Medicine and Public Health
• /
• v.53 no.5
• /
• pp.342-352
• /
• 2020

Objectives: The aim of this retrospective cohort study was to investigate whether non-alcoholic fatty liver disease (NAFLD) was associated with incident bone mineral density (BMD) decrease. Methods: This study included 4536 subjects with normal BMD at baseline. NAFLD was defined as the presence of fatty liver on abdominal ultrasonography without significant alcohol consumption or other causes. Decreased BMD was defined as a diagnosis of osteopenia, osteoporosis, or BMD below the expected range for the patient's age based on dual-energy X-ray absorptiometry. Cox proportional hazards models were used to estimate the hazard ratio of incident BMD decrease in subjects with or without NAFLD. Subgroup analyses were conducted according to the relevant factors. Results: Across 13 354 person-years of total follow-up, decreased BMD was observed in 606 subjects, corresponding to an incidence of 45.4 cases per 1000 person-years (median follow-up duration, 2.1 years). In the model adjusted for age and sex, the hazard ratio was 0.65 (95% confidence interval, 0.51 to 0.82), and statistical significance disappeared after adjustment for body mass index (BMI) and cardiometabolic factors. In the subgroup analyses, NAFLD was associated with a lower risk of incident BMD decrease in females even after adjustment for confounders. The direction of the effect of NAFLD on the risk of BMD decrease changed depending on BMI category and body fat percentage, although the impact was statistically insignificant. Conclusions: NAFLD had a significant protective effect on BMD in females. However, the effects may vary depending on BMI category or body fat percentage.

• Korean Journal of Veterinary Service
• /
• v.28 no.3
• /
• pp.225-234
• /
• 2005

Egg has been considered as one of the most important food sources in both nutritionally and economically. However, because the hazards of egg flow chains' complexity from producers to consumers and the insufficiency of cold chain systems in Korea are still remained, preventive measures for egg safety should be established. This experiment was carried out to investigate the changes of egg qualify during storage in order to find out the proper storage condition and eggshell treatment. Eggs were stored at cold condition $(5^{\circ}C,\;relative\;humidity;\;RH:\;65\pm3\%)$ and room Condition $(1st: Sep\; 6\~Nov\; 15,\;2001,\; 10\~30^{\circ}C,\;RH\;41\~86\%,\;2nd;\; Dec\;13,\;2001\~Feb\;21,\;2002,\;4\~23^{\circ}C,\;RH\;36\~89\%)$ after eggshell treatment (unwashed, washed and coated egg) during'10 weeks and examined weight loss and interior quality periodically. Weight loss was in decreasing order room washed > room unwashed > cold washed > cold unwashed > room coated > cold coated egg. And, Haugh unit was decreasing order room washed > room unwashed > room coated > cold washed > cold unwashed > cold coated egg. Our findings show that both coated eggs and refrigeration reduces the rate of decline in Haugh units and egg weight. And, washed eggs had lower average Haugh units and a higher weight loss than any of the eggshell treatment in both storage conditions. Conclusively, for washing eggshell, 150 ppm of sodium hypochlorite, regular exchange and temperature control of water should be consistent and also eggs should be dried immediately after washing. Also, national guidelines for temperature and moisture of storage places, transportation and expiration data should be established to keep quality and weight loss of eggs. Storage temperature that is a critical factor in the quality and safety of eggs should be kept under 12'c and labelling of expiration date should be obligatory.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.2
• /
• pp.200-210
• /
• 2018

Objectives: The purpose of this study is to assess the exposure to ozone and total volatile organic compounds(TVOCs) generated during welding work at a shipyard and recommend respiratory protective equipment(RPE) adequate against these hazards. Method: Ozone was collected for about 30 minutes at two-minutes intervals using a direct reading instrument, specifically an ozone analyzer(Serinus 10, Ecotech, Australia). TVOCs were collected for about 30 minutes at three-minute intervals using a portable GC (Alpha 115, Synspec BV, the Netherlands), and were determined simultaneously by area sampling at the welding plume closest to the welder's breathing zone. The total measurements were 162 for ozone($CO_2$ welding 47, TIG 60, stick 55), and 136 for TVOCs($CO_2$ 65, TIG 50, stick 21). Based on these measurements, a literature survey was conducted to assess the adequacy of RPE. Results: Relative to Korean OEL, measurements above STEL 0.2 ppm were 23.4% for $CO_2$, 63.3% for TIG and 14.5% for stick welding. There were significant differences(p=<0.0001) among welding types. Compared with ACGIH peak exposure of 0.4 ppm for ozone, which is not applied in Korea, $CO_2$ welding exceeded it by 10.6%, TIG by 40.0% and stick by 7.3%. Although it was not feasible to compare them directly since there are no Korean OEL, TVOCs had very high levels similar to the concentrations before moving into a new apartment and about 10-20 times the indoor air quality recommendations for some individual measurements. Conclusions: As ozone removal RPE has been recommended in welding environments for a long time(Lunau, 1967), this fact was demonstrated based on the results of the on-site work environment measurements(ozone and TVOCs). In conclusion, for all welding at a shipyard, gas/vapor and particulate combination RPE are recommended. If this is not possible, it should at least be present for TIG welding.

• Food Science and Biotechnology
• /
• v.16 no.2
• /
• pp.315-319
• /
• 2007

Biofilm formation on various surfaces is a well-known phenomenon and it has caused pollution problems, health and safety hazards, and substantial economic loss in many areas including the food industry. In the present study, Gamma irradiation at a dose of 2.0 kGy reduced the bacterial counts of Staphylococcus aureus and Pseudomonas aeruginosa suspensions by 6.7 and >6.5 log CFU/mL, respectively, and 30 ppm of sodium hypochlorite effectively reduced the counts of both bacterial suspensions to below the limit of detection ($<2\;log\;CFU/cm^2$). However, in bacterial biofilms attached to stainless steel, gamma irradiation at a dose of 10.0 kGy reduced the counts of S. aureus attached fur 1 hr and overnight by ${\geq}5.1\;and\;5.0\;log\;CFU/cm^2$, respectively. Gamma irradiation at a dose of 1.0 kGy reduced the counts of P. aeruginosa counts to below the limit of detection ($<2\;log\;CFU/cm^2$). On the contrary, S. aureus and P. aeruginosa cells attached to stainless steel chips were difficult to eliminate using sodium hypochlorite. Four hundred ppm of sodium hypochlorite reduced the counts of S. aureus and P. aeruginosa attached for 1 hr by 2.5 and $3.3\;log\;CFU/cm^2$, respectively.