• Journal of Preventive Medicine and Public Health
• /
• 제4권1호
• /
• pp.95-105
• /
• 1971

Carbon monoxide poisoning is one of the most serious health hazards in Korea. Although the incidence rate has been assumed to be the highest in the world, there has been no avaiable reports as far as the annual & nation-wide incidence are concered. Authors analyzed the incidence reports from 1965 to 1970 filed by the National Police & also made incidence survey on Seoul area in 1968 & 1969. The results of these surveys informed us that the official police reports are very much underevaluated. The stochastic estimations of the generel incidence were made based on the informations which were obtained through incidence survey made in Seoul area. The findings obtained are as follows; 1. The annual incidence of CO poisoning tends to increase since 1965. 2. The incidence is higher in the urban area & the incidence in Seoul is the highest in the world. 3. The frequency of incidence is the highest in the December. 4. The main causes of poisoning are the gas leakage from 'ondol' floor & the leaking of gas from kitchen to room through the connecting door. 5. The incidence survey made in Seoul area revealed that the official police reports are underevaluated around one-eighth of actual incidence. 6. The health hazards induced by CO poisoning is greater than those caused by 19 Class I & Class II communicable diseases.

• 한국가스학회지
• /
• 제17권4호
• /
• pp.1-8
• /
• 2013

본 연구에서는 벌크 중합법을 이용한 폴리스티렌 중합공정의 폭주반응에 대한 열적 위험성을 가속속도열량계(ARC)와 소규모 반응열량계(MM)를 이용하여 평가하였다. 당해 중합공정은 반응온도 $120^{\circ}C{\sim}130^{\circ}C$로 운전되어져야 하며, $130^{\circ}C$ 이상의 반응온도에서는 반응 생성물의 급격한 점도 증가로 인하여 반응기의 온도제어 실패에 따른 폭주반응의 위험성이 존재하였다. 또한 당해 중합공정의 반응온도($120^{\circ}C{\sim}130^{\circ}C$)에서 공정운전 초기에 반응기의 냉각실패가 발생할 경우 폭주반응으로 인해 반응기의 온도와 압력이 각각 30 ~ 50분 이내에 약 $340^{\circ}C$, 5.3 bar 까지 급격히 상승하여 반응기의 파열판이 파열되거나 반응기가 폭발할 수 있는 열적 위험성이 높게 나타났다.

• 한국산업보건학회지
• /
• 제22권3호
• /
• pp.235-243
• /
• 2012

Objectives: The purpose of this study is the work environment management method through risk assessment and investigation of the work place that deals with Ammonium nitrate, based on information in and outside the country. Methods: This study suggests method of work environment management through risk assessment and investigation of the work place that deals with Ammonium nitrate, and finds out cases of Ammonium nitrate causing hazard, danger and health risk, based on literature investigation. Results: Rats exposed repeatedly to $LD_{50}$ 2,217 mg/kg(rat), $LC_{50}$ 88.8 mg/L(rat, skin) which cause high level of skin irritation, reported 1 $mg/m^3$ of NOAEL, while LOAEL was less than 100 mg/kg for the rats orally administered with the $LD_{50}$ 2,217 mg/kg(rat), $LC_{50}$ 88.8 mg/L(rat, skin), for 13 weeks. Domestically 31,640 ton/y of ammonium nitrate has been used in 22 workplace and the result of workplace assessment was 0.0171-0.9983 $mg/m^3$. ADD was 8.77-59.63 ${\mu}g/kg-day$ according to the exposure scenario. In other words the result of the risk assessment goes beyond the 'standard 1'. Conclusions: Ammonium nitrate creates a high level of irritation and toxicity when coming in breathe it or contact with skin, and is classified as category3 of GHS and specific target organ toxicant (irritating respiratory system). Exposure level at work places needs to be maintained under $1mg/m^3$, to prevent workers from being damaged.

• 한국소음진동공학회논문집
• /
• 제24권11호
• /
• pp.854-860
• /
• 2014

Workers engaged in car inspection works have been exposed to many occupational hazards including noise, particulate matter, and volatile organic substances. Noise-induced hearing loss(NIHL) is one of the leading health hazards among Korean workers. The aim of this study is to evaluate the noise levels in several car inspection shops by introducing the evaluation methods of KMOEL/OSHA and ACGIH. Six sites in central area of Korea were selected to monitor the noise levels of workers by personal and area sampling methods for two consecutive days in spring, summer, fall and winter seasons. Dosimeters have been used for this noise monitoring program. Obtained noise levels by the evaluation method according to KMOEL/OSHA are the range of 50.2~88.2 dB(A), these are lower than KOEL/OSHA standards level of 90 dB(A). But highest noise by ACGIH's evaluation methodology is recorded 92.3 dB(A) and is greater than NIHL standard level of 85 dB(A). So that many workers may be exposed to the dangerous noise environment. The higher the car inspection loads daily, the higher the noise levels in the sites. Seasonal fluctuation of noise levels at the process might give monitoring results with high variations. Area noise levels showed higher than those of personal sampling, which illustrate some high noise spots in the car inspection areas.

• Safety and Health at Work
• /
• 제12권4호
• /
• pp.496-504
• /
• 2021

Background: With the increasing demand for industrial robots and the "noncontact" trend, it is an appropriate point in time to examine whether risk assessments conducted for robot operations are performed effectively to identify and eliminate the risks of injury or harm to operators. This study discusses why robot accidents resulting in harm to operators occur repetitively despite implementing control measures and proposes corrective actions for risk assessments. Methods: This study collected 369 operator-injured robot accidents in Korea over the last decade and reconstructed them into the mechanism of injury, work being undertaken, and bodily location of the injury. Then, through the techniques of Systematic Cause Analysis Technique (SCAT) and Root Cause Analysis (RCA), this study analyzed the root and direct causes of robot accidents that had occurred. Causes identified included physical hazards and complex combinations of hazards, such as psychological, organizational, and systematic errors. The requirements of risk assessments regarding robot operations were examined, and three case studies of robot-involved tasks were investigated. The three assessments presented were: camera module processing, electrical discharge machining, and a panel-flipping robot installation. Results: After conducting RCA and comparing the three assessments, it was found that two-thirds of injury-occurring from robot accidents, causative factors included psychological and personal traits of robot operators. However, there were no evaluations of the identifications of personal aspects in the three assessment cases. Conclusion: Therefore, it was concluded that personal factors of operators, which had been overlooked in risk assessments so far, need to be included in future risk assessments on robot operations.

• 한국환경보건학회지
• /
• 제50권4호
• /
• pp.282-290
• /
• 2024

Background: In order to evaluate the national effort to improve air quality through the Act on Air Quality Management Regions, an investigation of the current status of air quality in respective regions and the health impact of air pollution should be undertaken. Objectives: This study is a preliminary study on the status of PM_2.5 in the central region of South Korea and its health effects. It can be applied to the evaluation of the effectiveness of the Act on Air Quality Management Regions. Methods: Time series variation of PM_2.5 concentrations in the air quality management region (hereafter referred to as AQMR) and in the non-AQMR area in the central region of South Korea were created. Odds ratios (OR) were calculated based on the survey results of whether the residents of Jeollabuk-do were feeling anxiety caused by air pollution by sex, region, and regional characteristics. Relative risk (RR) values of lung cancer deaths in each city in the AQMR for the central region of South Korea were calculated. Results: During the period from Dec. 2018 to Dec. 2021, the average concentration of PM_2.5 was higher in the AQMR at 26.0 ㎍/m³ compared to 19.5 ㎍/m³ in the non-AQMR. The odds ratio (OR) calculated using data from the Jeonbuk Research Institute (2020) suggested that women were more uncomfortable or anxious about their lives due to air pollutants than were men. The OR evaluation results also showed that in terms of PM_2.5 sensitivity, residents in the non-AQMR were relatively more sensitive than those in the AQMR. The relative risk (RR) was calculated to evaluate the relationship between health hazards (PM_2.5) and diseases (lung cancer). As a result, for super-aged people over 80 years old, compared to the non-AQMR (Muju-gun and Jangsu-gun), the residents in the AQMR (Jeonju, Gunsan, and Iksan) have about twice the relative risk of lung cancer. Conclusions: It is necessary to make efforts to improve residents' health and extend their healthy lives through efforts to reduce air pollutants such as PM_2.5 in areas specially selected as an AQMR.

• Safety and Health at Work
• /
• 제14권3호
• /
• pp.243-249
• /
• 2023

Background: Southeast Asia has many people who work in the agriculture sector. Not many stakeholders pay special attention to the health of farmers, even though they are exposed to various types of hazards. One of the most common health complaints among farmers is related to work-related musculoskeletal disorders (WMSDs). This study aims to assess the prevalence of WMSDs and factors associated with them among farmers in Southeast Asia. Methods: A literature search on PubMed, ScienceDirect, Scopus, and EBSCO was conducted. Articles were included if they studied ergonomic problems among farmers from 11 countries in the Southeast Asia region and were published during 2015-2022. The Critical Appraisal Skills Program was used to evaluate the quality of the articles. The search process and retrieval process reflected PRISMA's recommendation. Result: There were 14 studies found from 3 countries that had published articles in PubMed and ScienceDirect, including Thailand [8], Indonesia [4], and Malaysia [2]. The prevalence of WMSDs in Thailand, Indonesia, and Malaysia was 78,31%, 81,27%, and 88,39%, respectively. Common factors associated with WMSDs include age, sex, smoking habits, drinking alcohol habits, working period (years), type of work, awkward position, non-ergonomic equipment, repetitive movements, and lifting heavy loads. Conclusion: The prevalence of WMSDs among farmers in Southeast Asia is considerably high. Effective intervention is essential for reducing the prevalence and protecting workers' health and well-being.

• Safety and Health at Work
• /
• 제7권1호
• /
• pp.63-71
• /
• 2016

Background: Construction painters have not been studied well in terms of their hazards exposure. The objective of this study was to evaluate the exposure levels of total volatile organic compounds (TVOCs) for painters in the construction industry. Methods: Activity-specific personal air samplings were carried out in three waterproofing activities [polyurethane (PU), asphalt, and cement mortar] and three painting activities (epoxy, oil based, and water based) by using organic-vapor-monitor passive-sampling devices. Gas chromatograph with flame ionization detector could be used for identifying and quantifying individual organic chemicals. The levels of TVOCs, by summing up 15 targeted substances, were expressed in exposure-index (EI) values. Results: As arithmetic means in the order of concentration levels, the EIs of TVOCs in waterproofing works were 10.77, 2.42, 1.78, 1.68, 0.47, 0.07, and none detected (ND) for indoor PU-primer task, outdoor PU-primer task, outdoor PU-resin task, indoor PU-resin task, asphalt-primer task, asphalt-adhesive task, and cement-mortar task, respectively. The highest EI for painting works was 5.61 for indoor epoxyprimer task, followed by indoor epoxy-resin task (2.03), outdoor oil-based-spray-paint task (1.65), outdoor water-based-paint task (0.66), and indoor oil-based-paint task (0.15). Assuming that the operations were carried out continuously for 8 hours without breaks and by using the arithmetic means of EIs for each of the 12 tasks in this study, 58.3% (7 out of 12) exceeded the exposure limit of 100% (EI > 1.0), while 8.3% (1 out of 12) was in 50e100% of exposure limit (0.5 > EI > 1.0), and 4 tasks out of 12 were located in less than 50% of the limit range (EI < 0.5). Conclusion: From this study, we recognized that construction painters are exposed to various solvents, including carcinogens and reproductive toxins, and the levels of TVOC concentration in many of the painting tasks exceeded the exposure limits. Construction workers need to be protected from chemical agents during their painting works by using personal protective devices and/or work practice measures. Additional studies should focus on the exposure assessment of other hazards for construction workers, in order to identify high-risk tasks and to improve hazardous work environments.

• Safety and Health at Work
• /
• 제6권2호
• /
• pp.104-113
• /
• 2015

Background: Given the long hours on the road involving multiple and interacting work stressors (i.e., delivery pressures, irregular shifts, ergonomic hazards), commercial drivers face a plethora of health and safety risks. Researchers goal was to determine whether and to what extent long-haul trucker work schedules influence sleep duration and quality. Methods: Survey and biometric data collected from male long-haul truck drivers at a major truckstop in central North Carolina over a six month period. Results: Daily hours worked (mean = 11 hours, 55 minutes) and frequency of working over government-mandated daily HOS regulations (23.8% "frequently or always") were statistically significant predictors of sleep duration. Miles driven per week (mean = 2,812.61), irregular daily hours worked (63.8%), and frequency of working over the daily hour limit (23.8% "frequently or always") were statistically significant predictors of sleep quality. Conclusion: Implications of findings suggest a comprehensive review of the regulations and operational conditions for commercial motor vehicle drivers be undertaken.

• 한국산업보건학회지
• /
• 제25권3호
• /
• pp.254-284
• /
• 2015

Objectives: There is a requirement to select target materials for mutagenicity(Genotoxicity) testing, so we determined to set the test priorities of them by searching the related database. Methods and Results: We searched a number of databases to find information on mutagenicity tests with chemicals under the Occupational Safety and Health Act(OSH Act), such as KOSHANET, National Toxicology Program(NTP), European Chemicals Agency(ECHA), US National Library of Medicine(NLM), and Genetic Toxicology Data Bank(GENE-TOX), as well as ChemIDplus webpage, and presented the information. Also we anticipated their hazards with ACToR sites to confirm the 58 mutagenicity(Genotoxicity) tests we will perform. Conclusions: We presented target materials for mutagenicity testing with specific GLP tests consisting of reverse mutation(Ames), chromosomal aberration and micronucleus test.