• Journal of Periodontal and Implant Science
• /
• 제40권3호
• /
• pp.139-143
• /
• 2010

Purpose: Pink gingival esthetic especially on the anterior teeth has been an important success criterion in implant-supported restoration. Inter-implant papillae are a critical factor for implant esthetics, and various techniques for inter-implant papilla reconstruction have been introduced. The aim of this study is to suggest and evaluate a surgical technique for reconstructing inter-implant papillae. Methods: A 28-year-old man had an implant placed on the #13 and #14 area. Four months after implant placement, a second stage surgery was planned for inter-implant papilla reconstruction. At the time of the abutment connection, I-type incisions were performed on the #13i & #14i area followed by full-thickness flap elevation and connection of a healing abutment on underlying fixtures without suture. Results: Two weeks after the second stage implant surgery, soft tissue augmentation between the two implants was achieved. Conclusions: I-shaped incisions for papilla reconstruction performed during the second stage implant surgery were useful for inter-implant papilla reconstruction and showed a good esthetic result.

• 대한치과교정학회지
• /
• 제28권3호
• /
• pp.453-459
• /
• 1998

저자들은 임프란트 매식 후 골유착을 위한 초기 치유기간 이전에 악정형력이 임프란트 주위 조직에 미치는 영향을 관찰하기 위하여 가토 12마리의 양측 대퇴골에 임프란트를 식립하고 2주, 4주 그리고 6주후에 각각 300g의 악정형력을 Ni-Ti close coil spring을 이용하여 매식된 임프란트에 4주동안 가하고 관찰한 후 다음과 같은 결론을 얻었다. 1. 모든 실험군의 임프란트는 4주간의 악정형력 적용후에도 안정된 견고성을 유지하였다. 2. 2주 실험군에서 대조군에 비해 임프란트와 골조직 사이의 섬유조직 증식이 많이 관찰 되었으나 특이할만한 염증소견은 관찰되지 않았다. 3. 4주 실험군, 대조군에서는 2주 실험군, 대조군과 각각 비교하였을 때 보다 많은 양의 골재생이 관찰 되었으며 실험군과 대조군 모두에서 임프란트와 골조직 사이의 섬유조직은 관찰하기 힘들었다. 4. 6주에서는 실험군과 대조군 사이에 뚜렷한 차이가 발견되지 않았다. 이상의 결과로 보아 임프란트 주위의 골조직 재생이 충분하지 않아도 골의 양과 질이 우수해 임프란트 식립시 견고한 초기고정을 얻을 수 있다면 골유착이 완성되는 초기 치유기간 이전에도 치과교정적 고정원으로 사용가능할 것으로 사료된다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제35권2호
• /
• pp.112-123
• /
• 2013

This study aims to investigate the clinical outcome following treatment of peri-implantitis lesions. Five subjects with 7 implants were treated with surgical approach. Four subjects with 6 implants were initially treated with non-surgical approach or hygiene control. However, inflammation was not resolved and more bone loss was found. Therefore, surgical treatment was performed. After surgical exposure of the defect, granulation tissue was removed and implant surface was treated using tetracycline and chlorhexidine. Then, the flaps were sutured. The wound healing was performed in a non-submerged mode. The present finding demonstrates stable results without progression of bone loss. In one subject, deep V shaped bone defect was filled with bone substitute (ICB, CanCellous Bone, Rockey Mountain Tissue Bank, USA), and resorbable membrane (Lyoplant$^{(R)}$, B.Braun Aesculap AG, Germany) was placed over the grafted defect and healing abutment was connected. However, the inflammation was not resolved and more bone loss was found. At one month after regenerative surgery, the implant was removed.

• 구강회복응용과학지
• /
• 제29권3호
• /
• pp.272-279
• /
• 2013

골치유 기간 중 임플란트-골 계면에서 일정 수준 이상의 미세동요가 발생하게 되면 임플란트의 골유착이 방해받게 되므로 임플란트 식립 후 초기 골반응에 관해 임플란트 안정성은 하나의 지표가 된다. 본 연구의 목적은 임플란트 식립 후 전향적인 연구를 통해 초기 임플란트 안정성 변화를 추적하여 골치유 양상을 추론하고자 하였다. 총 26명의 환자에게 식립된 30개의 임플란트를 대상으로 하악골에 1회법으로 식립 직후 1주 간격으로 12주간 공진주파수분석을 시행하여 초기 안정성의 변화를 구하였으며 식립 직후와 1개월 간격으로 변연골 흡수 정도를 방사선학적 방법으로 측정하였다. 식립 직후와 각 치유기간 동안의 ISQ값 비교에서 식립 4주에서 6주사이에 골질에 따른 차이를 보였으나(P<0.05), 6주 이후에는 골질군 간에는 임플란트 안정성 변화에 차이가 없었다(P>0.05). 방사선학적 검사에서는 변연골의 차이가 관찰기간내에 유의하게 변화하지 않았다(P>0.05). 임플란트 식립 후 초기 골치유과정은 골흡수과정에 연속적인 과정으로 4주 이후 바람직한 골치유과정이 진행됨을 공진주파수분석으로 관찰할 수 있었다.

• 구강회복응용과학지
• /
• 제37권3호
• /
• pp.130-137
• /
• 2021

목적: 다양한 봉합술을 통해 임플란트 주변에 최적화된 각화점막을 확보하려는 시도가 진행되었다. 본 연구의 목적은 임플란트 식립 후 2개의 서로 다른 봉합술 시행 후 연조직의 치유 양상을 평가하는 것이다. 연구 재료 및 방법: 15명의 환자에서 18개의 임플란트가 식립되었고 연구에 포함되었다. 부가적인 골이식 없이 단순 임플란트 식립만 진행하였다. 2개의 서로 다른 봉합술을 이용해 paramarginal flap design을 시행한 협측 판막을 임플란트 치유 지대주 하방으로 고정하였다. 디지털 구내 스캐너를 이용하여 초진, 수술 직후, 발사, 3개월 시점에 스캔을 진행하였다. 각 시점에 따른 스캔 데이터를 인접치의 교두, 소와, 치유지대주 등의 여러 점들을 기준으로 초진 데이터와 중첩하였다. 각 시점의 스캔 데이터를 초진 데이터와 subtraction한 다음 임플란트 주위 연조직의 증가량에 해당하는 폐곡면의 부피를 측정하였다. 폐곡면의 부피는 mm³ 단위로 계측하였다. 3개 시점에서 2개의 서로 다른 봉합술에 의한 부피 변화를 비교하기 위해 nonparametric rank-based 분석을 시행하였다. 결과: 양쪽 군 모두 치유는 양호하였다. 양쪽 봉합군은 수술 후 즉시 연조직 부피의 증가를 보여주었다. 3개월에 걸쳐 부피는 시간에 따라 유의성 있게 감소하였다(P < 0.001). Flap folding suture 군의 연조직 부피는 3개월 시점에서 interrupted suture 군보다 더욱 높은 중앙값을 보였으나 통계적 유의성은 없었다(P > 0.05). 결론: 임플란트 시행 시 paramarginal flap 형태로 거상된 판막을 flap folding suture로 고정한 군은 3개월 치유 기간 후 interrupted suture 군보다 더욱 높은 연조직 증강 수치를 보였다. 하지만 좀더 장기적인 관찰 연구가 필요할 것으로 사료된다.

• 대한치과보철학회지
• /
• 제62권2호
• /
• pp.157-164
• /
• 2024

진단, 수술, 인상, 보철물 제작 등 임플란트 치료 전 과정에서 디지털 기술이 활용되고 있다. 본 증례에서는 디지털 수술 가이드를 이용하여 합병증 없이 상악동 거상술을 시행하고, 계획된 위치에 임플란트를 식립하였다. 골유착을 위한 치유 기간 이후, CAD-CAM(Computer-aided design/Computer-aided Manufacturing)으로 맞춤형 지대주 및 임시 보철물을 제작하여 장착하고, 환자의 적응도와 교합을 평가하였다. 임시 보철물상에서 교합 변화가 관찰되어, 광중합형 컴포지트 레진으로 수리하였다. 최종 보철물 제작 시, 지대주의 수직 침하, 임시 보철물의 형태와 적응된 교합 관계를 반영하기 위해, 이중 스캔과 지대주 수준의 디지털 인상을 채득하였다. 치은 압배 없이 치은 연하 변연을 인기하기 위해, CAD-CAM 소프트웨어상에서 라이브러리화된 지대주 데이터를 중첩하고, 지르코니아 최종보철물 제작하여 장착하였다. 구치부 임플란트 수복 시, 디지털 시스템을 이용하여 전통적인 방법에서 겪는 어려움을 줄이고, 수술부터 보철물 제작까지 효율적인 치료 과정과 안정적이고 예지성 있는 결과를 얻어 보고하는 바이다.

• 대한치과의사협회지
• /
• 제51권12호
• /
• pp.643-649
• /
• 2013

The aim of this study was to achieve the healing of peri-implantitis defects and the hard tissue regeneration using the augmentation of a xenograft on defect site. Two patients were treated with the surgical approach. With a full muco-periosteal flap elevation, the implant surfaces were exposed and taken the debridement of granulation tissue around the abutment. Each surface of the abutments was prepared with the air-abrasive device (PerioFlow$^{(R)}$) for decontamination. Bovine-derived bone mineral (Bio-Oss collagen$^{(R)}$) was then used to fill the defects, and no membrane was placed on the grafting site. Radiographs and clinical photo was taken to compare from baseline status. Within the limits of the present case, this case shows the significance of the surgical treatment of peri-implantitis. And this also verifies the stability of bovine-derived bone mineral and effectiveness of Air-abrasive device (PerioFlow$^{(R)}$).

• The Journal of Advanced Prosthodontics
• /
• 제7권2호
• /
• pp.151-159
• /
• 2015

PURPOSE. To describe and characterize the surface topography and cleanliness of CAD/CAM manufactured zirconia abutments after steaming and ultrasonic cleaning. MATERIALS AND METHODS. A total of 12 ceramic CAD/CAM implant abutments of various manufacturers were produced and randomly divided into two groups of six samples each (control and test group). Four two-piece hybrid abutments and two one-piece abutments made of zirconium-dioxide were assessed per each group. In the control group, cleaning by steam was performed. The test group underwent an ultrasonic cleaning procedure with acetone, ethyl alcohol and antibacterial solution. Groups were subjected to scanning electron microscope (SEM) analysis and Energy-dispersive X-ray spectroscopy (EDX) to verify and characterize contaminant chemical characterization non- quantitatively. RESULTS. All zirconia CAD/CAM abutments in the present study displayed production-induced wear particles, debris as well as organic and inorganic contaminants. The abutments of the test group showed reduction of surface contamination after undergoing an ultrasonic cleaning procedure. However, an absolute removal of pollutants could not be achieved. CONCLUSION. The presence of debris on the transmucosal surface of CAD/CAM zirconia abutments of various manufacturers was confirmed. Within the limits of the study design, the results suggest that a defined ultrasonic cleaning process can be advantageously employed to reduce such debris, thus, supposedly enhancing soft tissue healing. Although the adverse long-term influence of abutment contamination on the biological stability of peri-implant tissues has been evidenced, a standardized and validated polishing and cleaning protocol still has to be implemented.

• 대한치과의사협회지
• /
• 제51권4호
• /
• pp.190-197
• /
• 2013

A titanium based screw shaped dental implant was first introduced by Branemark and a treatment protocol where the restoration of edentulous area by connecting abutment after the osseointegration of the titanium surface of the implant and surrounding bone structure has been proposed. Although this protocol is widely accepted as a standard up to date, the healing duration of 3-6 months as well as the need for provisional prostheses during this period present as a major drawback. Immediate loading has been accomplished through the advent of various implant designs, enforced surface treatments, diverse forms of abutment, and delicate surgical techniques together with the increase in demand from the patients. The success rate of the immediate loading technique has been first reported as 85.7% by Dr. Schnitman in 1990 which recently has been reported up to 100% in the case of immediate loading in single tooth by Dr. Kan. To ameliorate the success rate of immediate loading technique, selection of patients presenting a sound bone quality and quantity, acquiring primary stability through delicate surgical techniques and fabrication of prostheses which accounts for biological stabilities should all be taken into consideration. This presentation introduces the understanding of biological stability of immediate loading, various methods for measurement of stability and clinical cases regarding immediate loading technique.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제34권5호
• /
• pp.571-577
• /
• 2008

Introduction: Possible etiologic factors associated with bone loss around implants after implantation are surgical trauma, occlusal overload, periimplantitis, presence of micro gap and the formation of biologic distances. Tarnow et al. observed that the crestal bone loss was greater when the distance between the implants was <3mm than when the implants were ${\geq}\;3mm$ apart. The aim of this study was to evaluate the influence of different interimplant distance on marginal bone and crestal bone resorption in the beagle dogs. Materials and methods: The mandibular premolars of 5 dogs were extracted bilaterally. After 12 weeks of healing, each dog received 7 implants. On each side, implants were separated by 2mm (Group 1) and by 5mm (Group 2). After 16 weeks of healing, the dogs were sacrificed. Marginal bone loss was determined through linear measurements made between the implant-abutment junctions and the most coronal portions of the bone in contact with the implant surface. A line was drawn uniting the implant-abutment junctions of the adjacent implants, and a linear measurement was made at the midpoint in the direction of the most coronal peak of the interimplant bone crest to determine the crestal bone loss. Both of them was measured radiologically and histologically. Result and conclusion: In radiological analysis, the mean of marginal bone loss was $1.26{\pm}0.14mm$ for group 1 and $1.23{\pm}0.34mm$ for group 2, the mean of crestal bone loss was $1.10{\pm}0.14mm$ for group 1 and $1.02{\pm}0.30mm$ for group 2. The results were not statistically significant between 2 groups. In histological analysis, the mean of marginal bone loss was $1.63{\pm}0.48mm$ for group 1 and $1.62{\pm}0.50mm$ for group 2, the mean of crestal bone loss was $1.23{\pm}0.35mm$ for group 1 and $1.15{\pm}0.39mm$ for group 2. The differences were also not statistically significant. The clinical significance of this result is that the increase in the crestal bone loss results in the increase in the distance between the base of the interproximal contact of the crowns and the bone crest, and this determines if papilla will be present or absent between implants. Considering this fact, keeping up sufficient interimplant distance is important to minimize crestal bone loss.