• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.264-267
• /
• 2000

This paper describes a real-time 3D sound localization algorithm to be implemented with the use of a Bow power embedded DSP. This algorithm first divides the audible frequency band into three, on the basis of the analysis of the sound reflection and diffraction effects through different media from a certain sound source to human ears, and then in each subband a specific procedure is devised fur the 3D sound localization so as to operate real-time on a low power embedded DSP This algorithm aims at providing a listener with the 3D sound effects through a headphone at low cost and low power consumption.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.1
• /
• pp.108-112
• /
• 2001

Heart sound contains rich information regarding the dynamics of the heart and the auscultation has been a first choice of routine procedures for diagnosis of the heart. However, heart sounds captured using a conventional stethoscope are not often loud or clear enough for doctors to precisely classify their characteristics, especially, under the noisy environments of the hospital. A simple auscultation device that removed shortcomings of the conventional stethoscope was constructed in the study. The device employed a polymer based adherent differential output sensor which was on contact with skin through a coupling medium and appropriated electronic circuits for signal amplification and conditioning An ordinary headphone is taken to hear the captured heart sounds and the volume can be adjusted to hear well. It is also possible that the device sends the captured heart sound signals to a PC where the signals are further processed and viualized.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.790-795
• /
• 2004

The characteristics of refrigerator noise recorded in anechoic chamber was investigated in condition of a the real living room and a kitchen. To predict the noise propagation in an apartment unit, room acoustic simulation software was used. It was found that the noise level in the real living room was $4\sim8dB$ higher than in the anechoic chamber. When a noise barrier and absorption materials were used on the rear wall and floor, the noise level reduced up to $3\sim4dB$. In addition, when the subjective evaluation of auralized refrigerator noise was undertaken using headphone, it was revealed that 21dB (A) is the allowable sound pressure level of 95% satisfaction.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.185-188
• /
• 2000

Heart sound contains rich information regarding the dynamics of the heart and the auscultation has been a first choice of routine procedures for diagnosis of the heart. However, heart sounds captured using a conventional stethoscope are not often loud or clear enough for doctors to precisely classify their characteristics, especially, under the noisy environments of the hospital. A simple auscultation device that removed shortcomings of the conventional stethoscope was constructed in the study. The device employed a polymer based adherent differential output sensor which was on contact with skin through a coupling medium and appropriated electronic circuits for signal amplification and conditioning. An ordinary headphone is taken to hear the captured heart sounds and the volume can be adjusted to hear well. It is also possible that the device sends the captured heart sound signals to a PC where the signals are further processed and viualized.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.2
• /
• pp.68-77
• /
• 2005

The purpose of a spatial audio system is to give a listener an impression as if he were present in a recorded environment when its sound is reproduced. For this purpose a dummy head microphone is generally used. Because of its human-like shape, dummy head microphone can reproduce spatial images through headphone reproduction. However, its shape and size are restriction to public use and it is difficult to convert the output signal of dummy head microphone into a multi-channel signal for multi-channel environment. So, in this paper, we propose a multi-channel 3D microphone technology. The multi-channel 3D microphone acquire a spatial audio using five microphones around a horizontal plane of a rigid sphere and through post processing, it can reproduce various reproduction signals for headphone, stereo, stereo dipole, 4ch and 5ch reproduction environments. Because of complex computation, we implemented H/W based post processing system. To verily the Performance of the multi-channel 3D microphone, localization experiments were Performed. The result shows that a front/back confusion, which is the one of common limitations of conventional dummy head technology, can be reduced dramatically.

• ETRI Journal
• /
• v.22 no.2
• /
• pp.11-19
• /
• 2000

If the right and left signals of a binaural sound recording are reproduced through loudspeakers instead of a headphone, they are inevitably mixed during their transmission to the ears of the listener. This degrades the desired realism in the sound reproduction system, which is commonly called 'cross-talk.' A 'cross-talk canceler' that filters binaural signals before they are sent to the sound sources is needed to prevent cross-talk. A cross-talk canceler equalizes the resulting sound around the listener's ears as if the original binaural signal sound is reproduced next to the ears of listener. A cross-talk canceler is also a solution to the problem-how binaural sound is distributed to more than 2 channels that drive sound sources. This paper presents an effective way of building a cross-talk canceler in which geometric information, including locations of the listener and multiple loudspeakers, is divided into angular information and distance information. The presented method makes a database in an off-line way using an adaptive filtering technique and Head Related Transfer Functions. Though the database is mainly concerned about the situation where loudspeakers are located on a standard radius from the listener, it can be used for general radius cases after a distance compensation process, which requires a small amount of computation. Issues related to inverting a system to build a cross-talk canceler are discussed and numerical results explaining the preferred configuration of a sound reproduction system for stereo loudspeakers are presented.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.4
• /
• pp.167-180
• /
• 2011

Recently, 3-D audio technologies are commonly implemented through headphones. A major problem of the headphone-based 3-D audio is in-the-head localization, which occurs due to the inaccurate Head-Related Transfer Function (HRTF). Since the individual measurements of HRTFs are impractical, there have been several researches for HRTF customization. In this paper, an efficient method of customizing HRTFs for the sound externalization is proposed. Firstly, it is determined which part will be customized in HRTF through psychoacoustical experiments. Then, the method controlling spectral notches and envelopes to provide individual localization cues are described. Since the proposed method is based on a critical-band rate, the structure is much simpler than that of previous studies, but still effective. The performance was evaluated through a series of subjective tests, and the results confirmed that the customized HRTF using proposed method could replace the measured individual HRTF successfully.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.599-602
• /
• 2005

This paper describes a experimental study determining the effects of the type and loudness of introducing sounds on the amenity and the masking degree of background noise. 132 relative test sounds with 11 types of introducing sounds and 3 steps of road traffic noise were presented to 29 subjects through headphone in the laboratory experiment. Seven scale of polar adjective such as 'Strong Weak', 'Pleasant Unpleasant', 'Clear Unclear', 'Suitable Unsuitable', 'Comfortable-Discomfortable' was employed for the evaluation of amenity. And Seven scale of mono polar adjective such as 'Very-Not at all' was employed for the evaluation of masking degree against road traffic noise. The results are as follows; Green music was evaluated the highest amenity among test sounds and murmurs of a stream, signal music, song of a bird, crying of insect was showed the amenity rank of order. The softer and weaker introducing sound was evaluated more suitable and comfortable under the road traffic noise. So adequate level of introducing sounds was considered for the desirable urban soundscape. Also the louder sounds compared to background noises had greater masking effects. But similar levels of introducing sounds were recommended considering both good amenity and masking effects.

• Speech Sciences
• /
• v.6
• /
• pp.197-217
• /
• 1999

In a noisy class, the acoustic-phonetic features of the teacher and the perceptual features of learners are changed comparison with a quiet environment. Acoustical analyses were carried out on a set of French monosyllables consisting of 17 consonants and three vowel /a, e, i/, produced by 1 male speaker talking in quiet and in 50, 60 and 70 dB SPL of masking noise on headphone. The results of the acoustic analyses showed consistent differences in energy and formant center frequency amplitude of consonants and vowels, $F_1$ frequency of vowel and duration of voiceless stops suggesting the increase of vocal effort. The perceptual experiments in which 18 undergraduate female students learning French served as the subjects, were conducted in quiet and in 50, 60 dB of masking noise. The identification scores on consonants were higher in Lombard speech than in normal speech, suggesting that the speaker's vocal effort is useful to overcome the masking effect of noise. And, with increased noise level, the perceptual response to the French consonants given had a tendency to be complex and the subjective reaction score on the noise using the vocabulary representative of 'unpleasant' sensation to be higher. And, in the point of view on the L2(second language) acquisition, the influence of L1 (first language) on L2 examined in the perceptual result supports the interference theory.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.689-692
• /
• 2008

Noises from ceiling mounted air-conditioning units were recorded in various actual situations such as offices, classrooms and libraries. Eight specimens of air-conditioners from major domestic and foreign manufacturers' were investigated in this study. A head and torso simulator was located 1.5 m beneath the air-conditioner panel for the measurements and sound pressure levels of the recording sounds were varied from 28 to 55 dBA with 3 dB steps for subjective evaluations. A total of 88 stimuli was randomly presented to subjects using a headphone system in semi-anechoic chamber. Two-categorized (noisiness and amenity) nine-point scale was used as evaluation method. The third scale ('point 3') among the nine-point scale was set as the threshold of allowable level of the air-conditioning sounds in consideration of the real situations. The results indicate that the allowable sound pressure level is around 34 dBA for both noisiness and amenity categories.