• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.6
• /
• pp.216-225
• /
• 2023

This paper describes the finite element analysis and die design change of cold heading punching process to increase the cold forging tool life and reduce the tool wear and stress concentration. Through this study, the optimization of punch tool design has been studied by an analysis of tool stress and wear distribution to improve the tool life. Plastic deformation analysis was carried out in order to understand the cold heading process between tool and workpiece stress distribution. Cold heading punch die design was set up to each process with different four types analysis progressing, the cold heading punch dies shapes with combination of point angle and punch edge corner radius shapes of cold forging dies, punch die material properties and frictional coefficient. The design parameters of point angle and corner radius of punch die geometry, die material properties and frictional coefficient were selected to apply optimization with the DoE (design of experiment) and Taguchi method. DoE and Taguchi method was performed to optimize the cold heading punch die design parameters optimization for bolt head cold forging process, it was possible to expect an reduce the cold heading punch die wear to the 37 % compared with current using cold heading punch in the shop floor.

• International Journal of Fluid Machinery and Systems
• /
• v.3 no.2
• /
• pp.102-112
• /
• 2010

Artificial heart pumps have attracted the attention of researchers around the world as an alternative to the organ used in cardiac transplantation. Conventional centrifugal pumps are no longer considered suitable for long-term application because of the possibility of occurrence of blood leakage and thrombus formation around the shaft seal. To overcome this problem posed by the shaft seal in conventional centrifugal pumps, the magnetically suspended centrifugal pump has been developed; this is a sealless rotor pump, which can provide contact-free rotation of the impeller without leading to material wear. In Europe, clinical trials of this pump have been successfully performed, and these pumps are commercially available. One of the aims of our study is to numerically examine the internal flow and the effect of leakage flow through the gap between the impeller and the pump casing on the performance of the pump. The results show that the pressure head increases compared with the pump without a gap for all flow rates because of the leakage of the fluid through the gap. It was observed that the leakage flow rate in the pump is sufficiently large; further, no stagnant fluid or dead flow regions were observed in the pump. Therefore, the present pump can efficiently enhance the washout effect.

• Journal of Fashion Business
• /
• v.14 no.3
• /
• pp.1-19
• /
• 2010

The Assyrians usually wore two types - the tunic and the shawl. These two types were worn alone, or in combination and changes were introduced by varying the proportions of the tunic or shawl. The tunic appeared to be of the sleeves are short and reaching to the ankles or shortened to knee length according to the rank. Assyrian shawl pattern can be divided into five distinct styless. Many of the styles were suitable for costumes to wear in religious plays and pageants. Fringed shawls were the trademark of forma1 Assyrian costume. The usual badge of rank was a long fringed shawl. Intermediate rank wore shawl with short fringes and lower grade wore no shawl at all. The military costume was comparative uniformity : conical helmets was regarded as Scythic in character, short, fringed tunics, wide belts or helmet, round caps and long tunics covered in metal scales, belted at the waist. Assyrian woman costume was the long tunic with fringed hem and a long fringed shawl or was a plaid tunic and wide belt over it. They wore gold crown and horned Cap and tiara, ugal (head-dress) and the most ordinary earrings were the drop and the cross shape and necklace was made of the coloured stones and bracelets ended with heads of animal was regarded as Scythy style or adorned with a rosette at the centre.

• Journal of Powder Materials
• /
• v.4 no.4
• /
• pp.243-251
• /
• 1997

Engine valve-shaped TiAl-Mn intermetallics containing 43.5 to 47.5at%Al (Mn/Al=0.036) are successively fabricated by reactive sintering the elemental powder mixtures near-net shaped by extrusion and die forging. A duplex structure consisted of lamellar grains and equiaxed $\gamma$ grains is developed for all compositions, and the areal fraction of the lamellar grains(or equiaxed $\gamma$ grains) decreases (or increases) with increasing Al content. As Al content increased, the elongation increases with accompanying decrease in yield strength and ultimate tensile strength at both room temperature and 80$0^{\circ}C$. This indicates that the suitable composition is Ti-45at%Al-1.6at%Mn in considering the balance of ambient and elevated tensile properties. The reactive-sintered Ti-45Al-1.6Mn alloy shows superior oxidation resistance not only to the plasma arc melted one but also to the heat resistance steel STR35(representative exhaust valve head material for automotive engine). The reactive-sintered Ti-45Al-1.6Mn alloy coated with an oxidizing scale exhibits a better wear resistance than induction hardened martensitic steel STR11(representative exhaust valve tip material for automotive engine).

• Journal of the Korean Home Economics Association
• /
• v.51 no.2
• /
• pp.147-159
• /
• 2013

This study aims at developing and producing the creative design of a lingerie look after reviewing the aesthetic value about lingerie look featured in John Galliano's works. As for the research method, the selection process from the works was followed together with literature review for empirical analysis over lingerie looks, where 2,764 pieces in total were reviewed from Galliano's Pret-a-Porter collections covering from 2001S/S until 2010F/W and Christian Dior's Haute Couture and Pret-a-Porter collections that he is in charge of as head designer and 291 pieces were finally singled out that show the lingerie look image well. Then, the formative expression was examined about those looks and the characteristics were induced from them. Formativeness expressed in Galliano's lingerie look, in term of lingerie style, was categorized as erotic, retro, and deconstructive. The glittering and smooth material like silk and satin, and the visible material like lace and chiffon were mainly used for material rather than foreign material. By doing so, the romantic and erotic image was highlighted. In the production method, it was grouped into transposition of wear, direct and indirect exposition, and deconstructive way. These aesthetic characteristics introduced by formative expression appeared in the form of eroticism, play, and deconstructiveness.

• Journal of Hydrogen and New Energy
• /
• v.24 no.4
• /
• pp.302-310
• /
• 2013

As an initial step to develop a liquid hydrogen pump of piston type operated under cryogenic and high pressure, leakage and piston head shape for the piston pump were discussed with temperature and pressure. As the results, the leakage depended on correlation among density, viscosity, clearance area by the low temperature. In order to reduce the leakage, it was found that the air-tightness can be improved by minimizing contact surface between piston and cylinder, and also increasing pressure in-cylinder can reduce piston clearance. Among the proposed piston shapes, D type piston shape had the most air-tightness. D type piston had smaller contact surface than other piston shape and easier expansion of cup shape by pressure. The leakage of D type piston shape was found about 7%, compared with A type piston shape. But it was required that analyze about vapor lock by friction and wear resistance.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.3
• /
• pp.56-62
• /
• 2008

The biocompatibility and the fatigue strength of Co-Cr-Mo alloy are excellent, so it is used well for the material of artificial joints. The head of artificial joint needs mirror surface for reduction of abrasive resistance. Mirror finishing of Co-Cr-Mo alloy with geometrically defined single crystal diamond cutting tools is handicapped by micro chipping of tool edge. In general, it is said that the micro chipping of diamond tool is caused by work hardening of Co-Cr-Mo alloy for the cut. In the present research, mirror finishing of Co-Cr-Mo alloy by applying ultrasonic elliptical vibration cutting was carried out. The experimental results show that the micro chipping of diamond tool was suppressed and the tool wear was remarkably reduced as compared with the ordinary diamond cutting without elliptical vibration motion. It was confirmed that the good mirror surface of maximum surface roughness of 25 nmP-V was obtained for the cutting length of about 14 m. It is expected that mirror finishing of Co-Cr-Mo alloy can be achieved by applying ultrasonic elliptical vibration cutting practically.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.352-364
• /
• 2007

It is essential to reduce track maintenance costs and to extend the periodic replacements of continuous welded rails based on accumulated passing tonnage. As recently train load decrease and rail joints wear down less, the periodic replacements of continuous welded rails can be extended. There are many kinds of rail damage like squat, head-check and corrugation. These can be taken nondestructive or naked eye test. So the periodic replacements of continuous welded rails based on accumulated passing tonnage were examine with focusing on a crack of rail bottom of continuous welded rail. Therefore, this study measure dynamic response of track by metro train load, it compute impact coefficient and track spring coefficient for estimating a condition of actual track system. Also, it is converted the measured stress waveform into stress frequency histogram by the rain-flow counting methods, and then the equivalence of stress is calculated. As apply s-n curve of a new welded rail, accumulated fatigue damage ratio of laid rail and remaining service lives is estimated. This study suggest a plan of the periodic replacements of continuous welded rails based on accumulated passing tonnage classified by the types of track system.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.10a
• /
• pp.106-114
• /
• 1998

Tribological investigation of ultra thin film magnetic storage disks which have two different kinds of start/stop zone of laser textured bump disk and mechanically textured disk for before CSS test and after CSS test. To measure surface roughness, height reduction before/after CSS test and obtain accurate topographies, AFM(Atomic Force Microscope) which is most powerful recently has been used. The result of statistical analysis showed that both laser textured bump height and mechanically textured zone height have been reduced about 4~7nm after 15000 cycle CSS test. Using commercial Nano-Indenter, ramping load scratch test has been performed to investigate friction characteristic for laser textured zone and mechanically textured zone before/after CSS test.

• Journal of the Korean Society of Costume
• /
• v.51 no.6
• /
• pp.53-65
• /
• 2001

The major purpose of this study is to obtain the evident and visual structure of costume of priest with symbol through the Old Testament. Based on corroborative the Old Testament, this thesis analyzes the costume of priest. This compares Aaron with his sons. This compares the two onyx stones on the shoulder pieces with four rows of precious stones on the breastpiece. This compares the robe with the woven tunic. This era falls on about from the 15th century before Christ. The crafts men whom God have endowed with skill make the vestments. Due to the christian religion, the body was entirely concealed. The costume of priest were not only used as dignity but also grandeur. According to the Old Testament the colour of the costume has signified not only the colour sense but also important symbolic meanings. The priest wore, over undergarments, a woven tunic, and he wore over the tunic, a robe, an ephod, a breastpiece, a sash, using a turban as head covering. Gold, and blue, purple and scarlet yarn, and fine linen are used. Aaron and his sons must wear them whenever they enter the Tent of Meeting or approach the altar to minister in the Holy Place, so that they will not incur guilt and die.