• Journal of the Korean Home Economics Association
• /
• v.43 no.1 s.203
• /
• pp.105-113
• /
• 2005

The purpose of this study was to suggest a standard sizing system for college female students' head wears according to their head types. The subjects were 193 college women, of 20 to 25 years-old. The subjects were directly measured anthropometrically and indirectly analyzed photographically. In previous tudy (Lim, 2004), 3 clusters as their head types were categorized. the sizing system, which had frequencies more than $4\%$ was classified 6 cases, 7 cases and 9 cases, respectively, by head 3 types. 3 types of size system, which were 56-28-38, 56-30-38 and 57-28-38(Eds note: which of the measurements are head girth, surface length 1 and surface length 2), which were included in 3 clusters. Although head girths were as the same, head surface length was different in size. On the contrary, head surface length was same, head girth was different. The result will contribute to fitness of head wear fitness of consumer, and the amount of production.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.6
• /
• pp.79-86
• /
• 2000

The effects of recirculated exhaust gas on the wears of piston and piston rings were investigated by the experiment with a two-cylinder, four cycle, indirect injection diesel engine operating at an engine load of 75% and an engine speed of 1600 rpm. For the purpose of comparison between the wear rates of two cylinders with and without EGR, the recirculated exhaust gas was sucked into one of two cylinders after the soot contenets in exhaust emissions were removed by an intentionally designed cylinder-type scrubber equipped with 6 water injectors(A water injector has 144 nozzles of 1.0 mm diameter), while only the fresh air was inhaled into the other cylinder. These experiments were carried out on the fuel injection timing fixed at 15.3$^{\circ}$ BTDC. It was found that the wear rate of piston skirt with EGR increased a little bit, but the piston head diameter increased, rather than decreased, owing to soot adhesion and erosion wear, and especially larger with EGR, and that the wear rates of the top and second piston ring(compression ring)thickness with EGR were more than twice the wear rate of top ring in case of no EGR, but the wear rate of oil rings thickness without EGR increased greater than that with EGR.

• Journal of Fashion Business
• /
• v.19 no.3
• /
• pp.14-30
• /
• 2015

The purpose of this study is to establish how main characters' mental states are expressed through costumes and makeup by understanding and analyzing the relationship between the costumes and the makeup in the movie "Anna Karenina" and to compare the 19th century Russian costumes. The study methods are a literature review and an empirical case study. The results are as follows. First, the costumes in "Anna Karenina" are a mixture of late crinoline and early bustle style in general. However, the costumes were altered after the actress's movements and acting were considered. Regarding colors, Anna wears a lavender robe as the virtuous wife, a wine-colored robe for love and death, and a white robe for innocence, thus reflecting her mental states; through the colors, her changes of mental state are expressed. Second, the costumes of Alexei Vronsky, are similar in style and colors to those of mid-late 19th century Russian military uniforms. White, blue and black costume colors are used to describe his situations and emotional changes. Third, Alexei Karenin wears 19th century costumes of dark and achromatic colors without decorations, representing his conservative, authoritative character. However, he showshis rage with a wine and red-colored costume at the end of the movie. Fourth, regarding the makeup in the movie, Anna wears makeup of a soft pink-gold color influenced by 19th century naturalism. Male characters express their characteristics with their beards and hair styles. Vronsky's Hollywood mustaches and wavy blonde hair show his charm, and Karenin's chin curtain beard and bald head reveal his conservative character. The costumes of the three main characters in the movie are not very different from 19th century style in general, but mental states and situations are expressed through accessories, and colors maximize all of the effects. Through this research, it is illustrated that the costumes and makeup in a movie can not only express characters' emotional changes but also show the relationships between the characters in different scenes.

• The International Journal of Costume Culture
• /
• v.12 no.2
• /
• pp.210-214
• /
• 2009

Cave 79 of Kumtura grottoes, is the best preserved cave, which has an important meaning for research on Uighur costume. This paper is intended to analyze the costume characteristics of female donors in Cave 79 by comparing image materials between Dunhuang murals and other murals in Xinjiang province. In Cave 79, female donor wears red robe with tight sleeve, whose collar is crescent-shaped decorated. Two different opinions are upheld for this decoration. One regards this as the turn-down collar, while the other believes this as decoration on V-neckline. Red robe is quite common in female donors of Xinjiang and Dunhuang murals and a female in fresco is wearing a crown in a triangle red headwear style, regarded as red silk and drooping at head. Female donors wear an extra coat, kame hair clasp, red jacket, light-colored high-waist skirt with a long-tail waistband, and tangerine Pibo (silk ribbon) with scattered small flowers. All these costume styles are commonly-used by Han females. The kame headwear is also the common ornament for Han females and the female's hairstyle is in cone shape on head by a white kame. Current costumes are similar but not completely same.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.236-243
• /
• 2003

We discussed the design of lens module schematic eyes equivalent to finite model eyes, which are used to model the human eye based on spherical aberration and Stiles-Crowford effect. The optical system for head mounted display (HMD) is designed and evaluated using lens module schematic eyes. In addition to a compact HMD system, an optical system with high Performance is required. To satisfy these requirements, we used diffractive optical elements and aspheric surfaces so that the color and mono-chromatic aberrations were corrected. The optical system for HMD is composed of 0.47 inch micro-display of SVGA grade with 480,000 pixels, a plastic hybrid lens for the virtual image, and the lens module schematic eyes. The designed optical system fulfills the current specifications of HMD: such as, EFL of 31.25 mm, FOV of 24H$\times$18V$\times$30D degrees, and overall length of 59.1 mm. As a result, we could design an optical system useful for HMD; the system is expected to be comfortable while the user wears it.

• Journal of the Korea Computer Graphics Society
• /
• v.22 no.5
• /
• pp.49-56
• /
• 2016

Mobile Virtual Reality Head Mount Displays such as Google Cardboard and Samsung Gear VR are being released, as well as PC-based VR HMDs such as Oculus Rift and HTC Vive. However, when the user wears HMD, it hides the external view of the user. Therefore, it may happen that the user is struck by the surrounding objects such as furniture, and there is no definite solution to this problem. In this paper, we propose a method to reduce the risk of injuries by visualizing the location and information of obstacles scanned by using a RGB-D camera.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.3
• /
• pp.27-33
• /
• 2012

Tele-presence and tele-operation techniques are used to build up an immersive scene and control environment for the distant user. This paper presents a novel tele-presence system using the camera tracking based on planar homography. In the first step, the user wears the HMD(head mounted display) with the camera and his/her head motion is estimated. From the panoramic image by the omni-directional camera mounted on the mobile robot, a viewing image by the user is generated and displayed through HMD. The homography of 3D plane with markers is used to obtain the head motion of the user. For the performance evaluation, the camera tracking results by ARToolkit and the homography based method are compared with the really measured positions of the camera.

• The Research Journal of the Costume Culture
• /
• v.6 no.4
• /
• pp.175-187
• /
• 1998

Hats are an important part of the fashion accessory business and Their importance is increasing year by year. Their importance is increasing not only as a means of accessory ut also as a means of sportswear due to the leisure-sports boom of the 90's. As hats are becoming more and more popular and ready-made, demand for comfortable and easy-fitting hats are increasing. Being an piece of apparel, fitting is very important factor in hats as well s in other forms of clothing. But many hat-wears complain of dissatisfaction of fitting of their hats. In addition to this, another problem is hat most hat designs have been flown in from the West without inspection of their fits. Designs to fit the Koran face and head have not been developed properly. This study is based on the need for the development of a well-fitting hat pattern design for Korean young women. After taking actual measurements of 170 young womens, a size system was organized for developing patterns for different size groups.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1202-1205
• /
• 2005

This paper describes a method for vision-based person identification that can detect, track, and recognize person from video using multiple cues: height and dressing colors. The method does not require constrained target's pose or fully frontal face image to identify the person. First, the system, which is connected to a pan-tilt-zoom camera, detects target using motion detection and human cardboard model. The system keeps tracking the moving target while it is trying to identify whether it is a human and identify who it is among the registered persons in the database. To segment the moving target from the background scene, we employ a version of background subtraction technique and some spatial filtering. Once the target is segmented, we then align the target with the generic human cardboard model to verify whether the detected target is a human. If the target is identified as a human, the card board model is also used to segment the body parts to obtain some salient features such as head, torso, and legs. The whole body silhouette is also analyzed to obtain the target's shape information such as height and slimness. We then use these multiple cues (at present, we uses shirt color, trousers color, and body height) to recognize the target using a supervised self-organization process. We preliminary tested the system on a set of 5 subjects with multiple clothes. The recognition rate is 100% if the person is wearing the clothes that were learned before. In case a person wears new dresses the system fail to identify. This means height is not enough to classify persons. We plan to extend the work by adding more cues such as skin color, and face recognition by utilizing the zoom capability of the camera to obtain high resolution view of face; then, evaluate the system with more subjects.

• Journal of Fashion Business
• /
• v.6 no.4
• /
• pp.113-124
• /
• 2002

The purpose on this study identified the purchasing conditions of Sports wear of the Chinese men residing in Beijing, Shanghai, Dalian, Tianjin, Harbin and Guangzhou, so that it helped sports wear manufacturers and retailers offer the basic data. For the study, a questionnaire used as a method of measurement, the 863 Chinese men were selected as a sample, SAS(Statistical Analysis System) program was used to analyze the data. The results from the study were as follows: 1. According to the investigation, the most preferred sports of Chinese men is soccer, as a whole. Swimming, basketball and ping-pong keep rank the next to soccer. 2. Accordingly age, area, profession and income, Chinese men maintained sports suit in order of training suit, swimming suit, soccer suit, tennis suit. It is found that holding amount of high-quality sports wears as ski, golf is on a low level. 3. It is appeared that Chinese men purchased in good order as follow brand: No-bran, Nike, Lening, Adidas. And except Nike, they purchased more Lening brand than foreign sports brand. 4. As the result of researching on the item of sports wear, it is found that they purchased various kind items in a higher rank 5 brands. 5. Sports wear's color that Chinese men purchased is blue, white, black, red. 6. The purchasing price that Chinese men favored is 200$\sim$599RMB. Thus, they expend average per head for sports suit buying, 486.0RMB. 7. Chinese men purchased very often at specialty store. And, coefficient of utilization at the usual market is on a low level. 8. In purchasing satisfaction, 80 % Chinese men were satisfied with goods(sports wear) that purchased in a higher rank 5 brands. So, average satisfaction degree showed over 3.8 as a high rate. 9. According to the result of satisfaction on Chinese men, 70% Chinese men showed satisfaction. Therefore, the average of satisfaction degree appeared 3.81 as a high rate.