• The Journal of the Acoustical Society of Korea
• /
• v.29 no.7
• /
• pp.422-430
• /
• 2010

The radiation property of a Tonpilz transducer is influenced by the structural variables of the transducer. In this study, with respect to a single mode Tonpilz transducer, the radiation patterns were calculated for different head mass geometries of the same effective radiation area. The shapes of the head mass analyzed were the most popular circular, regular triangular, square, regular hexagonal and regular octagonal types, and radiation pattern equations were derived for each of the head mass shapes. Based on the derived equations, radiation patterns in accordance with the shape and size of the head mass were calculated and the results were compared with each other. Validity of the calculation results were confirmed by means of finite element analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.906-909
• /
• 2005

In this study, the dynamic flying characteristics of the worn head sliders are investigated theoretically due to the change in head geometry caused by head and disk contact. The film shapes can be approximated as taper- truncated cycloidal-flat film. Two-dimensional time dependent modified Reynolds equation included molecular slip effect are formulated with neglected the roughness effect. The motion of head slider was assumed to have two degree of freedom in this work. Finite difference approximation with Newton Raphson iterative technique and the fourth order Runge-Kutta method were implemented to obtain the transient response of the slider head with various change in head geometry numerically and compared with the transient response of the IBM3380 type head slider. The simulation results show the film shape has affects significantly on the static and dynamic characteristic of slider head in magnetic storage systems.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.4
• /
• pp.213-220
• /
• 1997

In this study, a design for a shape of centrifugal pump impeller has been performed using a p.c. under a Windows environment. Interaction between a user and a computer has been easily established using the Visual Basic. In determining an outer diameter of an impeller, steps are divided into two, a basic computational step and a refinment step. In this way user can enter his/her experience at the refinment step and hence can expect to lessen the nonlinear nature inherent to the design. In determining a shape of a side view of an impeller, the Bezier cubic curve has been used, and it can be seen that the Bezier cubic curves are well suited in the shape design under a Windows environment. By simply manipulating the four control points, one can generate various cubic curves among which one is selected. Also, a simple method, which can determine the curved position of an impeller vane, has been developed. These data can be used for final CAD drawings.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.533-538
• /
• 2002

This research demonstrates the transient response of a head disk assembly subjected to a half-sine shock pulse in the axial direction. In case of disk analysis, the numerical method presented by Barasch and Chen is used. Galerkin method is used with mode shape by numerical method. head-suspension system is modeled by the cantilever in order to get simulation results. Simulation results about total system of HDA are calculated by Runge-Kutta method.

• ETRI Journal
• /
• v.24 no.2
• /
• pp.176-179
• /
• 2002

Using scaled models for an anatomical head model and a simple head model, we investigated the effects of head size on specific absorption rate characteristics for two mobile phones operating at 835 MHz and 1765 MHz. Our results showed that a larger head produced a higher localized SAR at 835 MHz. However, at 1765 MHz, the differences among the head models were insignificant since the superficial absorption was dominant over the effects of head shape and size. A larger head produced a lower whole-head averaged SAR at both frequencies.

• Journal of the Korean Society of Safety
• /
• v.16 no.2
• /
• pp.13-21
• /
• 2001

The effect of water spray for the fire sprinkler depends on droples distribution over maximum possible floor area. The present study are carried out for the characteristics of water spray and droplets experimentally and numerically km two fire sprinkler heads which are CHM head and CHl heal CHl head is self-production and CHl head is widely used up to date. As the result of using CHM head, water spray and droplets are distributed over large area because CHM head has smooth surface and non-flamed shape. When the pressure of fire sprinkler head is low, SMD(sauter mean diameter) is large and when the pressure of fire sprinkler head is high, SMD is small.

• Fashion & Textile Research Journal
• /
• v.12 no.5
• /
• pp.650-656
• /
• 2010

To present a 6-piece baseball cap pattern with good wearing sensation and with good reflection of head shape, this study conducted direct measurement using martin's anthropometer and indirect measurement using surgical tape among women of 20 to 24 years old. For a crown, correlation analysis was carried out between direct measurements and surface shell measurements of each section on the head to set main items for prototype design, along with regression analysis to complete design formula; for a cap pattern, draping design was used on the finished crown to compete cap pattern design formula. The results showed that main measurement items to design a baseball cap included head circumstance and bitragion arc for a crown and the cephalic index for a cap. For the crown pattern reflecting the shape of the head, 6 pieces were designed with different sizes and types of front (F), side (S), and back (B) patterns; hemline was also designed diagonally and completed by reflecting the curve of the head.

• Journal of Magnetics
• /
• v.5 no.2
• /
• pp.55-58
• /
• 2000

Local magnetic properties and magnetization distributions on the air-bearing surface of a thin-film magnetic head have been studied by using scanning magneto-optical Kerr microscopy. The examined head was a merged MR read/inductive writing head with a write gap equal to 0.3 $\mu m$. Sizes of top and bottom pole-tips on the air-bearing surface of the writing head were equal to $3\mu m\times3\mu m$ and $3\mu m\times30\mu m$, respectively, The measured magnetic characteristics on the head air-bearing surface were found to be very sensitive to the head design. In particular, magnetization distributions were discovered to have asymmetrical shape. Maximum magnitudes of the magnetization were located near the shorten pole-tip. So, it was experimentally proved that more magnetic flux emanates just from this part of the air-bearing head surface.

• Animal cells and systems
• /
• v.1 no.2
• /
• pp.371-379
• /
• 1997

To investigate the movement of sperm head and the role of sperm neck in forward sperm motility in the Korean striped field mouse, Apodemus agrarius coreae, the morphological characteristics of the cauda epididymal spermatozoa were examined by light microscopy and scanning and transmission electron microscopy. Spermatozoa of A. agrarius coreae were characterized by the conspicuous shape of the acrosome and the long tail compared with those of other rodents. Total length of the sperm was $133\mu{m}$. The sperm head had a curved falciform shape. The head was 8.0${\mu}$m in length, and about 4.0 ${\mu}$m in width. The shape of acrosome had an openerlike form. The sperm tail (125 ${\mu}$m) consisted of four major segments: neck (0.5 ${\mu}$m), middle piece (29.5 ${\mu}$m), and principal piece plus the end piece (95 ${\mu}$m). The outer dense fibers were arranged in a horseshoe fashion, and No. 1, 5, 6, and 9 of the outer dense fibers were larger than the others. The mitochondrial bundles of middle piece were composed of a pair of arms, which surrounded the axone of the middle piece by the 45 0 angled helical structure. The total number of mitochondrial gyres was 188. In particular, the microfilament structures existed in plasma membrane of the sperm, which was adjacent to the acrosomal region on the nuclear membrane. The segmented columns were surrounded by microfilament structures, and the microfilament bundles were adjacent to the outer membrane of the first mitochondria of middle piece. This study presents for the first time the existence of microfilament structures within the plasma membrane of sperm which is located from the adjacent acrosome region to the connecting piece in sperm neck of Korean striped field mouse, Apodemus agrarius coreae. The present result suggests that the constriction and extension of microfilament in sperm neck as well as the wave-movement of sperm tail may play a role in the movement of sperm head.

• The KSFM Journal of Fluid Machinery
• /
• v.17 no.5
• /
• pp.19-26
• /
• 2014

The cross flow turbine attracts more and more attention for its relatively wide operating range and simple structure. In this study, a novel type of micro cross flow turbine is developed for application to a step in an irrigational channel. The head of the turbine is only H=4.3m and the turbine inlet channel is open ducted type, which has barely been studied. The efficiency of the turbine with inlet open duct channel is relatively low. Therefore, a guide nozzle on the turbine inlet is attached to improve the performance of the turbine. The guide nozzle shapes are investigated to find the best shape for the turbine. The guide nozzle plays an important role on directing flow at the runner entry, and it also decreases the negative torque loss by reducing the pressure difference in Region 1. There is 12.5% of efficiency improvement by attaching a well shaped guide nozzle on the turbine inlet.