• Korean Journal of Head & Neck Oncology
• /
• v.18 no.1
• /
• pp.60-64
• /
• 2002

Objectives: Three classic treatment modalities have been used to treat Graves' disease: antithyroid medication, radioiodine ablation, and subtotal thyroidectomy. Postoperative thyroid functions were studied in patients with Graves' disease treated by subtotal thyroidectomy to evaluate the superiority of surgical treatment. Materials and Methods: One hundred fourty patients of Graves' disease were analysed retrospectively in follow-up for more than three years following subtotal thyroidectomy. Postoperative serum levels of $T_3,\;T_4, TSH, TSH-R Ab, free $T_4$, were evaluated to watch hypo- or hyperthyroidsm. Results: In the evaluation of preop- and postoperative thyroid function after three years of subtotal thyroidectomy, $T_3$ was changed from $464.10{\pm}196.16ng/dl$ to $140.41{\pm}76.56ng/dl$ in mean value, $T_4$ was changed from $20.76{\pm}7.98{\mu}g/dl$ to $9.54{\pm}4.02{\mu}g/dl$, $TSHT_3$ was changed from $0.55{\pm}4.42{\mu}u/ml$ to $4.96{\pm}7.20{\mu}u/ml$, TSH-R Ab was changed from $41.6{\pm}28.27%$ to $28.7{\pm}28.79%$ and free $T_4$ was changed from $4.45{\pm}2.33ng/dl$ to $1.44{\pm}0.69ng/dl$ in mean value. Euthyroidism was noted in 118 patients(84.3%), overt hyperthyroidism in 6 patiens(4.3%), latent hyperthyroidism in 8 patients(5.7%), overt hypothyroidism in 2 patint(1.4%), and latent hypothyroidism in 6 patients(4.3%). Of surgical complications, permanant hypoparathyroidism was found in one patient, recurrent laryngeal nerve injury in two patients, postoprative bleeding with reoperation in two patients, and death in one patient. Conclusion: The thyroid function after subtotal thyroidectomy in diffuse toxic goiter is normal level (euthyroidism) in 84.3% and low recurrence rate of hyperthyroidism is showed with rare surgical complication. Therefore, subtotal thyroidectomy in diffuse toxic goiter is more effective and safe than RI or longterm ATD treatment, if the operation is performed by skillful surgeon.

• The Journal of Korean Society for Radiation Therapy
• /
• v.19 no.1
• /
• pp.43-49
• /
• 2007

Purpose: The aim of this study was the clinical implementation of IGRT using KV CBCT for setup correction in radiation therapy. Materials and Methods: We selected 9 patients (3 patient for each region; head, body, pelvis)and acquired 135 CBCT images with CLINAC iX (Varian medical system, USA). During the scan, the required time was measured. We analyzed the result in 3 direction; vertical, longitudinal, lateral. Results: The mean setup errors at the couch position of vertical, lateral, and longitudinal direction were 0.07, 0.12, and 0.1 cm in the head region, 0.3, 0.26, and 0.22 cm in the body region, 0.21, 0.18, and 0.15 cm in the pelvis region respectively. The mean time required for CBCT was $6{\sim}7$ minute. Conclusion: The CBCT on the LINAC provides the capacity for soft tissue imaging in the treatment position and real time monitoring during treatment delivery. With presented workflow, the setup correction within reasonable time for more accurate radiation therapy is possible. And it's image can be very useful for adaptive radiation therapy(ART) in the future with improved image quality.

• Korean Journal of Ichthyology
• /
• v.13 no.4
• /
• pp.237-247
• /
• 2001

Three species, Gymnogobius urotaenia, G. sp. 1 and G. sp. 2, which were collected at Hosanriver, Hosan-ri, Samcheock-si, Gangwon-do, Korea, were examined for study of the age and growth. There was no differences between sexes in growth (p>0.05) except in age 0 of G. urotaenia, However, there were differences among the three species (p<0.0001). namely, G. sp. 1 was longer by about 5~10 mm (SL) than the other two species in each age group, while G. sp. 2 was shortest in each age group: G. rotaenia, at age 0 was less than 45 mm, at age 1 to be 45~60 mm, at age 2 to be 60~80 mm, at age 3 to be over 80 mm, and its maximum size was 105.0 mm. G. sp. 1, at age 0 was less than 55 mm, at age 1 55~65 mm, at age 2 65~85 mm, at age 3 over 85 mm and its maximum size was 105.3 mm. G. sp. 2, 0 age was less than 40 mm, at age 1 40~55 mm, at age 2 55~75 mm, at age 3 over 75 mm and its maximum size was 85 mm. Changes of body parts with increasing of body length were examined and analyzed. Covariance analysis showed interspecies differences in the following characters: body depth, head length, caudal peduncle depth, upper jaw length and pelvic fin ray length. G. urotaenia had the highest K-value (the relative growth coefficient) in head length and pelvic fin ray length, and G. sp. 1 had the highest in body depth, caudal peduncle depth and upper jaw length. However, G. sp. 2 had the lowest K-value in these 5 characters.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.338-341
• /
• 2018

Wireless Power Transfer(WPT) of array antenna applied to beam-forming techniques enables highly efficient WPT when transmitters and receivers are not contacting and even when they are separated. However, this WPT method is possible to use only when human safety restriction by distance between the transmitters and the receivers is satisfied. In the paper, a $4{\times}8$ array antenna for 2.4 GHz is modeled by simulation, then electric field intensity and 10 gram average head SAR(Specific Absorption Rate) by distance away from the array antenna inputted 1 W of 2.4 GHz sinusoidal wave at each single antenna of the array antenna for 2.4 GHz were obtained. And they were compared with human safety restriction of draft of 2018 ICNIRP(International Commission on Non-Ionizing Radiation Protection) guidelines. As the result, power density of far field derived from the electric field intensity was $33.257W/m^2$, which satisfied with occupational human safety restriction but exceeded public's. In addition, the 10 gram average head SAR exceeded the human safety restriction.

• Archives of Craniofacial Surgery
• /
• v.24 no.2
• /
• pp.78-82
• /
• 2023

Blue nevi, which are characterized by collections of pigment-producing melanocytes in the dermis, have a variety of clinicopathological characteristics. Plaque-type blue nevus (PTBN) is a variant of blue nevi. PTBN presents at birth or arises in early childhood, and it shows a combination of the features found in common blue nevus and cellular blue nevus. It is typically found on the dorsal surface of the hands and feet or on the head and neck, and it is usually benign and stable over time. However, reports have occasionally described malignant melanomas developing in or associated with a PTBN. Malignant blue nevi are most commonly found on the scalp. We report the case of an 88-year-old woman with a malignant melanoma associated with a PTBN of the cheek.

• Korean Journal of Dental Materials
• /
• v.44 no.1
• /
• pp.69-77
• /
• 2017

The aim of this study was to investigate the effects of chitosan powder addition on the strengthening of conventional glass ionomer cement. Two types of chitosan powders with different molecular weight were mixed with conventional glass ionomer cement (GIC): low-molecular weight chitosan (CL; 50~190 kDa), high-molecular weight chitosan (CH; 310~375 kDa). The chitosan powders (CL and CH) were separately added into the GIC liquid (0.25-0.5 wt%) under magnetic stirring, or mixed with the GIC powder by ball-milling for 24 h using zirconia balls. The mixing ratio of prepared cement was 2:1 for powder to liquid. Net setting time of cements was measured by ISO 9917-1. The specimens for the compressive strength (CS; $4{\times}6mm$), diametral tensile strength (DTS; $6{\times}4mm$), three-point flexure (FS; $2{\times}2{\times}25mm$) with flexure modulus (FM) were obtained from cements at 1, 7, and 14 days after storing in distilled water at $(37{\pm}1)^{\circ}C$. All mechanical strength tests were conducted with a cross-head speed of 1 mm/min. Data were statistically analyzed by one-way ANOVA and Tukey HSD post-hoc test. The mechanical properties of conventional glass ionomer cement was significantly enhanced by addition of 0.5 wt% CL to cement liquid (CS, DTS), or by addition of 10 wt% CH (FS) to cement powder. The CL particles incorporated into the set cement were firmly bonded to the GIC matrix (SEM). Within the limitation of this study, the results indicated that chitosan powders can be successfully added to enhance the mechanical properties of conventional GIC.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.10
• /
• pp.656-664
• /
• 2017

This paper presents the design and fabrication of a high power piezoelectric ultrasonic surgery unit for multi-purpose dental implantation. A conventional piezoelectric ultrasonic surgery units consists of a transducer and a tip. However, the drawback of this simple structure is that the output performance of the transducer considerably changes with the change of the tips. An ultrasonic surgery unit that has an additional booster between the transducer and the tip can solve this problem to some extent; for this, an optimal structural design for the transducer is required. We used the Bolted Langevin Transducer (BLT) as the basic transducer; it consists of piezoelectric ceramics and a metal body. It's structure was optimized using mathematical methods to determine the length and radius of the tail and head masses. Additionally, the booster was also subjected to the same methods. Using these mathematical methods, optimal results in terms of the resonance frequency (24.96 kHz), displacement ($14.27{\mu}m$), and pressure (2.8 MPa), could be obtained. The validity of this proposed surgery unit was confirmed experimentally, exhibiting a cutting force of around 7% higher than that of a conventional surgery unit.

• Journal of the Korean Physical Society
• /
• v.73 no.9
• /
• pp.1393-1398
• /
• 2018

In conventional single-photon emission computed tomography (SPECT), only the photoelectric events in the detectors are used for image reconstruction. However, if the $^{131}I$ isotope, which emits high-energy radiations (364, 637, and 723 keV), is used in nuclear medicine, both photoelectric and Compton scattering events can be used for image reconstruction. The purpose of our work is to perform simulations for Compton SPECT by using the Geant4 application for tomographic emission (GATE). The performance of Compton SPECT is evaluated and compared with that of conventional SPECT. The Compton SPECT unit has an area of $12cm{\times}12cm$ with four gantry heads. Each head is composed of a 2-cm tungsten collimator and a $40{\times}40$ array of CdZnTe (CZT) crystals with a $3{\times}3mm^2$ area and a 6-mm thickness. Compton SPECT can use not only the photoelectric effect but also the Compton scattering effect for image reconstruction. The correct sequential order of the interactions used for image reconstruction is determined using the angular resolution measurement (ARM) method and the energies deposited in each detector. In all the results of simulations using spherical volume sources of various diameters, the reconstructed images of Compton SPECT show higher signal-to-noise ratios (SNRs) without degradation of the image resolution when compared to those of conventional SPECT because the effective count for image reconstruction is higher. For a Derenzo-like phantom, the reconstructed images for different modalities are compared by visual inspection and by using their projected histograms in the X-direction of the reconstructed images.

• The Journal of the Petrological Society of Korea
• /
• v.28 no.3
• /
• pp.217-225
• /
• 2019

This study describes a large recumbent fold, which occurs at the north entrance slope of the Batjae tunnel, Pyeongchang-gun, Gangwon-do, and interprets its formation mechanism. The several-hundred-meter scale fold, developed in the Jeongseon Limestone of the Paleozoic Joseon Supergroup, has a nearly horizontal axial plane and its head is facing north. Stretching lineations ($L_1$) observed on the composite foliations of bedding and axial plane cleavage plunge southward at about $10^{\circ}$. Small A-type or eye-shaped sheath folds together with S-shaped asymmetrical folds are often observed in the fold limbs and their axes are nearly parallel to the lineations ($L_1$) within center and rear parts of the fold. It is thus interpreted that the recumbent fold is a large sheath fold produced by the top-to-the-north ductile shearing due to the Songrim orogeny during the late Paleozoic to Triassic.

• The Research Journal of the Costume Culture
• /
• v.17 no.3
• /
• pp.407-423
• /
• 2009

The purpose of this study is to analyze Bakst's stage costume illustrations for Ballets Russes. The Russian Ballets has renown in the West since the early 20th century. Diaghilev first made his name as the organizer of art exhibitions in Russia and Western Europe. Diaghilev risked presenting only ballets in 1909, that time Bakst designed $Sch{\acute{e}}h{\acute{e}}razade$, L'Oiseau de Feu and Le Carnival. $Sch{\acute{e}}h{\acute{e}}razade$ was something new which overwhelmed the French people by then. It was seen to be the achievement of Wagner's idea where all the elements; the music, the design, the choreography, and the dancing fused into a perfect whole. The entire production was a hitherto unseen harmony of colors, sounds and movements. For the 1911 season in Paris, Diaghilev planned to present six new ballets and Bakst designed four ballets. Bakst's design of the set and the costume greatly shocked the audience. His "Originality" shines on the fact that he introduced a palette of colors in theater for the first time in history. He used a magic of colors to suggest the secret meaning of what was happening on the stage. The results can be divided into three distinct characteristics. First, oriental designs such as $Cl{\acute{e}}op{\hat{a}}tre$, $Sch{\acute{e}}h{\acute{e}}razade$, L'Oiseau de Feu, La $P{\acute{e}}ri$ and Le Dieu Blue with Russian, Indian and Persian traditional design in headdress and accessories ars found. Second, Le Carnival and La Spectre de la Rose used romantic styles with oriental details. Third, Greek chiton and Himation are used in Narcisse, $H{\acute{e}}l{\grave{e}}ne$ de Sparte, $L'Apr{\grave{e}}s-Midi\;d^{\grave{\;}}un$ Faune and Daphnis et $Chlo{\acute{e}}$ inspirde with various colors and geometic patterns. Bakst's orient of lush colored costumes, head dress, cushions, rugs and hangings became the immediate fashion imitated by Parisian couture houses and interior decorators.