• Journal of Oral Medicine and Pain
• /
• 제21권1호
• /
• pp.55-65
• /
• 1996

This study was performed to investigate the effects of head posture and occlusal splint on the vertical dimension in mandibular rest position and swallowing. Thirty health dental students ware selected lot this study and BioEGNⓡ(Bioresearch Inc., USA) was used for measuring interocclusal distance during rest - swallowing - rest - tapping movement. This swallowing movements were observed in both normal head posture(NHP) and forward head posture (FHP). Thickness of occlusal splint was about 2mm at posterior molar area and even tooth contact were achieved on light biting. The four mandibular positions at which interocclusal distance measured were swallowing position, after swallowing position in which interocclusal distance was maximum, rest position follows swallowing, and tapping position after rest. Changes of distance in each position were measured for three mandibular planes, that is, sagittal, frontal, and horizontal plane, respectively. The results obtained were as follows : 1. In normal head posture, the mandible was raised 1.03mm without splint, and 0.77mm with splint on swallowing, and there was no significant difference between the two. In horizontal plane, however, mandible was displaced more anteriorly in both swallowing position and tapping position with splint. 2. In forward head posture, the mandible was less raised with splint on swallowing, but features in horizontal plane were almost same as those in normal head posture. 3. In natural dentition, significant difference between NHP and FHP were observed in horizontal plane trajectory for swallowing and tapping position. But the difference for same positions were observed in frontal trajectory with splint. 4. Total amount of mandibular movement of two groups classified with sagittal interocclusal distance of swallowing position generally showed significant difference between the higher and the lower height group in head posture without splint. 5. Correlationship among total amount of mandibular movement for three mandibular planes were observed between sagittal plane and horizontal plane, and between sagittal plane and frontal plane in head posture without splint.

• 한국전문물리치료학회지
• /
• 제22권4호
• /
• pp.44-50
• /
• 2015

This study compared the effects of the initial head position (i.e., a HHP versus a relaxed head position) of subjects with and without a FHP on the thickness of the deep and superficial neck flexor muscles during CCF. The study recruited 6 subjects with a FHP and 10 subjects without a FHP. The subjects performed CCF in two different head positions: a HHP, with the head aligned so that the forehead and chin formed a horizontal line, and a relaxed head position (RHP), with the head aligned in a self-selected comfortable position. During the CCF exercise, the thickness of the longus colli (LCo) and the thickness of the sternocleidomastoid (SCM) were recorded using ultrasonography. The thickness of each muscle was measured by Image J software. The statistical analysis was performed with a two-way mixed-model analysis of variance. The thickness of the SCM differed significantly (p<.05) between the subjects with and without FHP. According to a post $h^{\circ}C$ independent t-test, the change in thickness of the SCM increased significantly during CCF in the subjects with FHP while adopting a HHP compared to that in the subjects without FHP. The change in thickness of the SCM was not significantly different between the two positions in subjects without FHP, and there was no significant change in thickness of the LCo muscle during the CCF exercise according to the initial position in both subjects with and without FHP. The results suggest that CCF should be performed in RHP to minimize contraction of the SCM in subjects with a FHP.

• The Journal of Korean Physical Therapy
• /
• 제7권1호
• /
• pp.21-31
• /
• 1995

This study was described the movement patterns when rising from supine to erect stance. Two hundred eighty seven subjects, ranging in age from 6 year to 28 were filmed while rising from a supine position. Movement Patterns were classified using categorical descriptions of the action of three body regions-the upper and lower extremity, head-trunk region. This study was designed to determine whether within the rising task the movement patterns of different regions of the body vary with age level and sex. The incidence of each movement pattern was calculated and graphed with respect to age level and sex. The most common form of rising for subject in the 6, 7 year mate group usually involved push and reach pattern with upper extremity, half kneel pattern with lower extremity, partial rotation pattern with head-trunk. In the 6, 7 year female group usually involved symmetrical push pattern with upper extremity, symmetrical squat with balance step pattern with lower extremity, symmetrical interrupted by rotation pattern with head - trunk. In the teenage and twenties both sex group usually involved symmetrical push pattern with upper extremity, symmetrical squat pattern with lower extremity, partial rotation pattern with head-trunk.

• 한국자동차공학회논문집
• /
• 제18권1호
• /
• pp.51-57
• /
• 2010

In recent years, a large number of study for rear impact has been conducted and as a result of study, researchers proposed the neck injury criteria and test procedures. But many questions, related to injury criteria and dummy biomechanical levels, remain unresolved. In recently reports, rear impact motions of BioRIDIIg is not humanlike but better than other dummy(HybridIII, RID3d). So, in this paper, 4 times sled test would be done to find the substitutable neck injury criteria in BioRIDIIg. To review corelation trend with neck injury critera and head-neck movement, we compared with recently announced neck injury criteria(NIC, Nkm, T1 ect.) and head-neck X-direction movement in BioRIDIIg. Finally, we find the head-neck X-direction movement on head C.G to T1 point may be considerable as the additional neck injury criteria.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.353-358
• /
• 2002

Human's vision is mostly confined to the area in the front and we, humans heavily depend on the sense of hearing to gather information in areas out of our sight. Thus, the virtual reality system consisting of the 3D sound effect gives the user a much better sense of reality than the system without the sound effect. Virtual 3D sound technology has mainly been researched with binaural system. The conventional binaural sound systems reproduce the desired sound at two arbitrary points using two channels in 3-D space. Head movement of listener might be change the nominal acoustic transfer function and deteriorate the performance of 3D sound system based on loudspeakers that needs a crosstalk canceller. In this paper, low kinds of sensitivity functions of sphere HRTF are derived to investigate the effect of head movement on HRTF in 3D sound system. Changes of HRTF caused by rotational and translational motion of head are obtained as we calculate the derivatives of HRTF with respect to angle and distance.

• 대한인간공학회지
• /
• 제19권1호
• /
• pp.91-100
• /
• 2000

In this paper the intent recognition system which recognizes the human's head movements as a simple non-verbal intent representation is presented. The system recognizes five basic intent representations. i.e., strong/weak affirmation. strong/weak negation, and ambiguity by image processing of nodding or shaking movements of head. The vision system for tracking the head movements is composed of CCD camera, image processing board and personal computer. The modified template matching method which replaces the reference image with the searched target image in the previous step is used for the robust tracking of the head movements. For the improvement of the processing speed, the searching is performed in the pyramid representation of the original image. By inspecting the variance of the head movement trajectories. we can recognizes the two basic intent representations - affirmation and negation. Also, by focusing the speed of the head movements, we can see the possibility which recognizes the strength of the intent representation.

• 치과방사선
• /
• 제11권1호
• /
• pp.79-87
• /
• 1981

The author analysed the interrelation between the morphologic changes of bone Structures and the position of condylar head from the routine radiographs of 134 cases of the temporomandibular joint arthrosis. The frequencies of coincidence between the site of bone defrmity and condylar head positional change were examined. Also, the positional changes of condylar head and the direction of condylar movement in relation to the kind of bone deformities were observed. The results obtained were as follows; 1. In 52.65 per cent of total cases, the site, of positional change of condylar head was coincided with the site of bone deformans. The frequencies of the coincidence between these in the five items among seven items examined were above 53 per cent. From the results, it seems that the positional changes of condylar head were related with the morphological change of bone structure. 2. Eburnation and erosion. revealed frequently positional changes in the opening and closing position of the mouth, although in the early stages of the TMJ arthrosis. 3. In the bone deformans, during opene position of the mough 44.81 per cent of total cases revealed backword movement and 37.74 per cent showed forward movement. In closed position of the mouth, downward movement was revealed in 35.23 per cent of total cases and upward movement 28.41 per ,cent of total cases. 4. In the cases showing eburnation, the frequencies of coincidence between the site of positional change and bone deformans were 58.57 per cent of the total cases. that means it was high in the early stages of the TMJ arthrosis.

• The Journal of Korean Physical Therapy
• /
• 제12권1호
• /
• pp.15-21
• /
• 2000

Rising from a supine position to erect stance is an important milestone in treatment of patients with neurologic dysfunction. The purposes of this study wed to describe the movement patterns that hemiplegic patients use when rising to a standing. position and to investigate whether movement patterns that an proposed to treat of functional activity, Seventeen patients were videotaped performing three trials of rising. Movement patterns were described with three body components : upper extremities, head-trunk, lower extremities. Subjects rose most commonly using a push and reach pattern of the upper extremities-symmetrical interrupted by rotation pattern in the head-trunk-an asymmetrical squat pattern in the lower extremities and a push and reach pattern of the upper extremities-symmetrical interrupted by rotation pattern in the head-trunk-an symmetrical squat with balance step pattern in the lower extremities.

• Archives of Reconstructive Microsurgery
• /
• 제17권1호
• /
• pp.48-50
• /
• 2008

Loupes-assisted microsurgery often needs an operational head lamp for a better condition of light. This may cause serious neck fatigue due to the weight the operational head lamp, the limitation of the operator's head movement from the hind cable, and some cost for purchasing and management of it. On the contrary, a mountain head lamp is very light, full of freedom in movement, applicable to all types of loupes, and relatively very cheap. In conclusion, a mountain head lame can be a cost-effective light source for Loupes-assisted microsurgery.

• 방송공학회논문지
• /
• 제26권5호
• /
• pp.500-507
• /
• 2021

가상현실 산업은 Covid-19 이후 비대면 콘텐츠 수요 급증과 메타버스에 대한 관심과 더불어 재도약할 기회를 얻었다. 따라서 이러한 흐름과 함께 가상현실 콘텐츠를 대중화를 위해서는 양질의 콘텐츠 제작과 가상현실 특성에 맞는 스토리텔링 연구가 지속적으로 이루어져야 한다. 이처럼 가상현실 특성을 적용한 콘텐츠가 사용자 피드백을 통해 효과적으로 제작되기 위해서는 해당 콘텐츠를 평가할 수 있는 정량적 지표가 필요하다. 본 연구에서는 가상현실 콘텐츠를 관람하는 과정을 분석하여 머리 움직임을 정량적 지표로 설정하였다. 이후 실험자는 5개 애니메이션을 관람하고 이에 따라 기록된 머리 움직임 정보와 몰입도 간의 상관관계를 분석하였다. 분석 결과는 머리 움직임 속도가 상대적으로 느릴 때 높은 몰입도를 나타내었고, 머리 움직임 속도가 콘텐츠 몰입도 정도를 나타내는 지표로 유의미하게 사용될 수 있다는 것을 알 수 있었다. 이렇게 도출된 결과는 이후 창작자가 가상현실 콘텐츠 제작을 할 때 프로토타입 제작 후 적용된 스토리텔링 방식의 유효성을 검증할 수 있는 정량적 지표로 사용될 수 있다. 이러한 방식은 제안된 스토리텔링 방식 문제점을 빠르게 파악하고 더 나은 방식을 제안할 수 있어 콘텐츠의 질을 향상시킨다. 본 연구는 머리 움직임 속도라는 정량적 지표를 기반으로 몰입도를 분석하는 기초연구로 양질의 가상현실 콘텐츠 제작과 가상현실 콘텐츠 대중화에 기여하고자 한다.