• International Journal of Fluid Machinery and Systems
• /
• v.4 no.1
• /
• pp.172-178
• /
• 2011

This paper presents an optimization procedure for high-efficiency design of a mixed-flow pump. Optimization techniques based on a weighted-average surrogate model are used to optimize a vane diffuser of a mixed-flow pump. Validation of the numerical results is performed through experimental data for head, power and efficiency. Three-level full factorial design is used to generate nine design points within the design space. Three-dimensional Reynoldsaveraged Navier-Stokes equations with the shear stress transport turbulence model are discretized by using finite volume approximation and solved on hexahedral grids to evaluate the efficiency as the objective function. In order to reduce pressure loss in the vane diffuser, two variables defining the straight vane length ratio and the diffusion area ratio are selected as design variables in the present optimization. As the results of the design optimization, the efficiency at the design flow coefficient is improved by 7.05% and the off-design efficiencies are also improved in comparison with the reference design.

• Korean Journal of Otorhinolaryngology-Head and Neck Surgery
• /
• v.61 no.12
• /
• pp.663-668
• /
• 2018

Background and Objectives The main objectives of this study were to determine the clinical usefulness of the program-assisted and real ear measurement (REM)-assisted fitting of hearing aids. Subjects and Method Fifteen participants with moderate to moderately severe hearing loss were enrolled in this study. Objective and subjective fitting results were assessed to compare the benefits between the program-assisted fitting (using a software fitting program) and the REM-assisted fitting. Real ear insertion gain (REIG), sound-field audiometry using warble tone, and Korean Hearing in Noise Test (K-HINT) were performed as objective tests. Sound quality rating was performed as a subjective test. Results In the program fitting, 48.89% of fitting points failed to come within ${\pm}10dB$ of the REIG target. In the REM fitting, however, the percentage of failure significantly decreased to 23.33% (p=0.013). In K-HINT test, the reception threshold for speech in quiet situation significantly decreased from 50.1 dB HL with the program fitting to 44.7 dB HL after the REM fitting (p<0.001). In front noise condition, signal-to-noise ratio improved from 4.53 dB to 3.50 dB with the REM fitting without statistical significance (p=0.099). In the sound quality rating, the REM fitting ($4.27{\pm}0.56$) showed a significantly better sound quality ratings than the program fitting ($3.69{\pm}0.74$) (p=0.017). Conclusion The REM fitting showed better results in both subjective and objective measurements than the program fitting.

• Clinics in Shoulder and Elbow
• /
• v.25 no.1
• /
• pp.22-27
• /
• 2022

Background: In some patients with rotator cuff tear (RCT), the axial view of magnetic resonance imaging (MRI) shows subtle posterior decentering (PD) of the humeral head from the glenoid fossa. This is considered to result from a loss of centralization that is typically produced by rotator cuff function. There are few reports on PD in RCT despite the common occurrence of posterior subluxation in degenerative joint disease. In this study, we investigated the effect of PD in arthroscopic rotator cuff repair (ARCR). Methods: We conducted a retrospective study of consecutive patients who underwent ARCR at our institute and were followed-up for at least 1 year. PD was identified as a 2-mm posterior shift of the humeral head relative to the glenoid fossa in the axial MRI view preoperatively. The tear size and fatty degeneration (FD, Goutallier classification) were also evaluated using preoperative MRI. Retears were evaluated through MRI at 1 year postoperatively. Results: We included 135 shoulders in this study. Ten instances of PD (including seven retears) were observed preoperatively. Fifteen retears (three and 12 retears in the small/medium and large/massive tear groups, respectively) were observed postoperatively. PD was significantly correlated with tear size, FD, and retear occurrence (p<0.01 each). The odds ratio for PD in retears was 34.1, which was greater than that for tear size ≥3 cm and FD grade ≥3. Conclusions: We concluded that large tear size and FD contribute to the occurrence of PD. Furthermore, PD could be a predictor of retear after ARCR.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.8
• /
• pp.1212-1216
• /
• 2006

This experiment was conducted to determine and compare some characteristics of the meat and carcass of rabbits aged 11 weeks according to sex. In the experiment thirty male and thirty female New Zealand White rabbits were slaughtered. The weights and percentages of cold carcasses, skin with head and limbs, liver, kidney, heart, lung, fore legs, hind legs, breast and ribs, loin and abdominal wall were recorded. The values for carcass length, lumbar circumference, pH in the muscles of Biceps femoris and Longissimus dorsi, meat to bone ratio and cooking loss were also determined. The mean values for cold carcass weight and cold dressing percentage were 832 g and 48.77% in male and 849 g and 48.69% in female, respectively. In this study no significant differences were shown between male and female rabbits in the characteristics of carcass and meat except the value of pH of Longissimus dorsi muscle which was markedly higher in males than that in females meat. Slaughter weight was positively correlated with the weights of carcass, skin with head and limbs, lung, liver, kidney, heart and weights of joints (p<0.01) and dressing percentage (p<0.05).

• Journal of Trauma and Injury
• /
• v.22 no.2
• /
• pp.154-160
• /
• 2009

Purpose: This study aimed to determine new criteria for detecting independent factors with high sensitivity in cases of cervical spine injury. We compared the sensitivity, the specificity, and the false negative predictive value (NPV) of plain radiographs with those of computed tomography for cervical spine injury in patients with minor head injury. Methods: We retrospectively reviewed the cases of 357 patients who underwent both cervical plain radiographs and computer tomography from January 2006, to September 2008. Patients were divided into two groups: the cervical spine injury group and the no cervical spine injury group. New criteria were organized based on variables that had significant differences in the logistic regression test. Results: Among the 357 patients, 78 patients had cervical spine injuries. The average age was $43.9{\pm}15.2$ yrs old, and the male-to-female ratio was 1.90. The most common mechanism of injury was motor vehicle accidents. There was a significant difference in loss of consciousness, Glasgow Coma Scale (GCS)=14, neurologic deficit, posterior neck tenderness, and abnormality of the cervical plain radiographs between the two groups on the logistic regression test. New criteria included the above five variables. If a patient has at least variable, the area under the ROC curve of the new criteria was 0.850, and the sensitivity and the false NPV were 87.2% and 5.2%, respectively. Conclusion: New criteria included loss of consciousness, GCS=14, neurologic deficit, posterior neck tenderness, and abnormality of the cervical plain radiographs. If the patient had at least 1 variable, he or she could have a of cervical spine injury with a sensitivity of 87.2% and a false NPV of 5.2%.

• Journal of the Korean Society of Safety
• /
• v.35 no.6
• /
• pp.32-45
• /
• 2020

The problem of determining the discharge rates of gases from pressurized vessels through pressure relief devices was dealt with comprehensively. First, starting from basic fluid flow equations, detailed modeling procedures were presented for isentropic nozzle flows and frictional flows in a pipe, respectively. Meanwhile, physical explanations were given to choking phenomena in terms of the acoustic velocity, elucidating the widespread use of Mach numbers in gas flow models. Frictional flows in a pipe were classified into adiabatic, isothermal, and general flows according to the heat transfer situation around the pipe, but the adiabatic flow model was recommended suitable for gas discharge through pressure relief devices. Next, for the isentropic nozzle flow followed by adiabatic frictional flow in the pipe, two equations were established for two unknowns that consist of the Mach numbers at the inlet and outlet of the pipe, respectively. The relationship among the ratio of downstream reservoir pressure to upstream pressure, mass flux, and total frictional loss coefficient was shown in various forms of MATLAB 2-D plot, 3-D surface plot and contour plot. Then, the profiles of gas properties and velocity in the pipe section were traced. A method to quantify the relationship among the pressure head, velocity head, and total friction loss was presented, and was used in inferring that the rapid increase in gas velocity in the region approaching the choked flow at the pipe outlet is attributed to the conversion of internal energy to kinetic energy. Finally, the Levenspiel chart reproduced in this work was compared with the Lapple chart used in API 521 Standatd.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.6
• /
• pp.430-437
• /
• 2012

In order to obtain information on the design parameters of the horizontal laterals in floodplain filtration, laboratory-scale sand-box experiments were performed where the head distributions on the laterals and the groundwater profiles were measured according to the change in parameters including lateral diameter, hydraulic conductivity of the sand, water level at the well and raw-water supply rate. Measured data were analyzed using a numerical code in order to identify the discharge intensity distribution along the laterals. It was observed from the result that the lowering of the water level at the well had minimal adverse effect on the performance of the floodplain filtration. Results also elucidated that the low conveyance of the laterals to transmit the filtrate was compensated and supplemented by a natural augmentation in horizontal conveyance through the aquifer when the raw-water supply rate exceeded the adequate recovery rate. With this mechanism, the water quality is expected to improve further since the travel distance through the aquifer is amplified. Based on these findings it can be suggested that the diameter of the lateral used in the floodplain filtration may be smaller than those in riverbank/bed filtration. It was also found that the ratio between the head loss occurring in a lateral and the total head loss in the floodplain filtration was proportional to the exit velocities of the laterals, which may be used to design and/or evaluate the lateral in floodplain filtration.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.spc
• /
• pp.1-8
• /
• 2008

We carried out this study to analyze changes of rice grain milling properties according to the transplanting time and to identify genetic resources suitable for improving milling quality of rice in paddy field of Yeongnam area. We analyzed grain filling and milling quality of 30 rice varieties. In late transplanting (June 20), heading date was delayed for 6 days, compared to normal transplanting(June 5). The grain filling ratio (GFR), perfect kernel ratio of milled rice (PKR), and head rice recovery (HRR) were improved in late transplanting. There was no significant difference in head rice yield of two transplanting time, even though the milled rice yield in late transplanting was significantly smaller than that in normal transplanting because of the reduction of spikelet numbers per panicle. The uniformity of brown rice grain measured by selection sieve norm was improve in late transplanting. There was no significant difference of milling loss ratio between normal and late transplanting but there was a trend for a increase of milling necessary time in late transplanting. Thus, our result suggest that optimum transplanting time is June 10 to 15 to improve grain filling and milling quality and produce high head rice yield in the southern paddy plain of Yeongnam region. We selected promising 9 rice varieties which are Nampyeongbyeo, Ilmibyeo, Chucheongbyeo, Dongjinbyeo, Hopyeongbyeo, Malguemi, Chilbo, Hinohikari, and Cheongmu having high percentage of ripened grain and milling quality as genetic resources to improve milling characteristics of rice varieties. Chucheongbyeo, Dongjinbyeo, and Malguemi showed the highest grain filling ratio and Nampyeongbyeo had the highest perfect kernel ratio. Nampyeongbyeo and Ilmibyeo showed the highest head rice yield with more than 500 kg/10a.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.3
• /
• pp.345-352
• /
• 2009

The purpose of inlet baffle is to distribute the flow uniformly over the entire cross-sectional area of the sedimentation basin. The goal when designing this baffle is to achieve some head loss while keeping the velocity gradients through the ports equal to the velocity gradient in the end of the flocculator, so as to not break up the flocs. Sedimentation tank performance is strongly influenced by hydrodynamic and physical effects such as inlet design. This study was conducted to evaluate the effect of open ratio of the inlet baffle on hydraulic behavior within a rectangular sedimentation basin using CFD simulation and ADV technique. In order to verify the CFD simulation, we measured the factual velocity at 18 points in the full-scale sedimentation basin at Y water treatment plant. Good agreement was obtained between the CFD predictions and the experimentally measured data. From the simulation results of the existing basin with 7.4 % open ratio, it was investigated that extreme decrease in velocity occurred in the middle of basin. Since then, flow features was unstable. The region which the velocity decrease rapidly moved forward to the flow direction in proportion to the increase of inflow velocity. Also, it was investigated that the flow characteristic of 6.0 % open ratio was significantly different from 7.4 % open ratio at the same configuration condition. These results are a clear indication that inflow momentum and open ratio are the parameters affecting the characteristics of hydraulic patterns. The influence of these parameters on the sedimentation performance requires further study.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.568-573
• /
• 2000

In this study, experimental and numerical analyses are carried out to investigate the performance of centrifugal pump with various air admitting conditions. Experiments on pump performance under air-water two-phase flow n accomplished using a centrifugal pump with semi-open type impeller having three, five and seven blades, respectively. Also, the numerical analysis of turbulent air-water two-phase flow using finite volume method has been carried out to obtain the pressure, velocities and void fraction on the basis of a so-called bubbly flow model with the constant size and shape of cavity. The results obtained through this study show the reasonable agreements within the range of bubbly flow regime. There are promising developments concerning application of the present study for the flow in a centrifugal pump with two-phase flow conditions and efforts must be followed to improve the turbulence model and two-phase flow model for turbomachinery.