• Journal of Oral Medicine and Pain
• /
• v.24 no.2
• /
• pp.189-206
• /
• 1999

This study was performed to investigate the factors affecting muscle activity and cephalometric variables according to change of head postures. For this study, 150 patients with temporomandibular disorders and 80 dental students without any signs and symptoms of temporomandibular disorders were selected as the patients group and as the normal group, respectively. Head position to body-midline in frontal plane and upper quarter posture to body plumb line in sagittal plane were observed clinically and electromyographic(EMG) activity of anterior temporalis, masseter, sternocleidomastoideus, and trapezius on clenching were recorded with $BioEMG^{(R)}$ in four head postures, which were natural head posture(NHP), forward head posture(FHP), $20^{\circ}$ upward head posture(UHP), and $20^{\circ}$ downward head posture(DHP). Cephaloradiographs were also taken in the same head postures as in EMG taking, but that was taken only in NHP for the patient group. Cephalometric variables measured were SN angle, CVT angle, atlas inclination angle, occlusal plane angle, Me-C2 angle, pharyngeal width, occiput~axis distance, area of pharyngeal space, and cervical curvature. The data were analyzed by SAS statistical program. The results of this study were as follows : 1. Between the patient and the normal group, there were significant difference in distance from plumb line to acromion, eye-tragus angle, electromyographic activity of the four muscles, and cephalometric variables of linear measurement. 2. There was no consistent pattern of correlation between upper quarter posture, EMG activity and cephalometric variables in any case without relation to cervical curvature and head position in frontal plane. 3. Sternocleidomastoid muscle only showed variation of electromyographic activty with changes of head postures, but all the muscles did show correlation with head postures. 4. All the cephalometric variables measured in this study showed difference of mean value by head posture, and CVT angle, pharyngeal width, occiput-atlas distance, and area of pharyngeal space showed correlation between these variables with change from NHP to FHP, and from NHP to UHP.

• Journal of KSNVE
• /
• v.10 no.2
• /
• pp.269-279
• /
• 2000

This paper deals with the development of biomechanical model on a seat with backrest support in the vertical direction. Four kinds of biomechanical models are discussed to depict human motion. One DOF model mainly describes z-axis motion of hip, two and three DOF models describe z-axis of hip and head, and while nine DOF model suggested in this study represents more motion than the otehr model. Three kinds of experiments were executed to validate these models. The first one was to measure the acceleration of the floor and hip surface in z-axis, the back surface in x-axis, and the head in z-axis under exciter. From this measurement, the transmissiblities of each subject were obtained. The second one was the measurement of the joint position by the device having pointer and the measurement of contact position between the human body and the seat by body pressure distribution. The third one was the measurement of the seat and back cushion by dummy. The biomechanical model parameters were obtained by matching the simulated to the experimental transmissiblities at the hip, back, and head.

• Korean Journal of Bronchoesophagology
• /
• v.13 no.1
• /
• pp.47-50
• /
• 2007

Foreign bodies of the parapharyngeal space can cause severe complications such as descending suppurative mediastinitis, jugular thrombophlebitis, cavernous sinus thrombosis and carotid erosion. Therefore, early diagnosis and surgical intervention are needed to reduce morbidity and mortality. We present a case of a toothbrush as foreign body in the parapharyngeal space in 28-year-old male patient. The tooth brush was broken and the remnant of that was left in the patient's mouth. Under general anesthesia, intraoral approach was undertaken and successfully the toothbrush was removed, and then incision and drainage was done by transcervical approach. We report this case with review of literature.

• Korean Journal of Applied Biomechanics
• /
• v.27 no.3
• /
• pp.211-217
• /
• 2017

Objective: The purpose of this study was to investigate the effect of a 12-week professional body massage program (PMP) on forward head posture, neck pain, and plantar foot pressure balance in men in their 20s. Method: A total of 20 men with musculoskeletal diseases were recruited for this study. The participants were asked to take part in a PMP twice a week for 12 weeks. The cranial vertical angle (CVA) for forward head posture and visual analogue scale (VSC) for neck pain and right/left foot plantar pressure balances were extracted to compare between pre- and post-program differences. Results: CVAs before ($56.86{\pm}4.55^{\circ}$) and after ($62.72{\pm}4.57^{\circ}$) and VSCs before ($6.95{\pm}1.70$) and after ($1.70{\pm}1.56$) PMP revealed statistically significant differences. The right foot, after PMP, showed a significant increase in the plantar pressure balance from $46.17{\pm}2.95$ to $49.44{\pm}1.29%$, while the left foot decreased significantly from $53.83{\pm}2.95%$ to $50.56{\pm}1.29%$. Therefore, based on these results, it may be said that the foot pressure balance abilities were improved after PMP because the ideal foot pressure ratio is 50%. Conclusion: Consequently, it was suggested that a 12-week PMP could be utilized for improvement of forward head posture, neck pain, and foot plantar pressure balance in men in the 20s with musculoskeletal diseases.

• Journal of Veterinary Clinics
• /
• v.34 no.1
• /
• pp.34-38
• /
• 2017

The aims of the present study were to determine the weaning time for adoption of kittens, and to evaluate the fetal growth rate during pregnant in free-roaming cats. This study was conducted on three pregnant free-roaming cats (one feral cat and two stray cats). Radiography and ultrasonography were performed on the feral cat and on one of the stray cats. In the feral cat, fetal head diameter was measured once during pregnancy to determine the cesarean section (C-sec) time. In the stray cat, serial fetal head diameter was measured from capture to parturition. The body weight of the feral cat's kittens was measured from 4 weeks postpartum because of their wildness. That of the stray cats' kittens was measured immediately after birth. In the feral cat, scheduled C-sec was performed at predicted parturition day by measurement of head diameter, and six healthy kittens were delivered. The stray cats had five and six kittens by natural delivery, respectively. In the body weight gain of feral and stray cat's kittens, two female kittens of the feral cat lost weight rapidly after they were separated from their mother, so they were returned to their mother for 1 more week. After that, the female kittens grew up without difficulty. Body weight gain of the ten kittens born to the two stray cats consistently increased, by approximately 14 g every day, until they were adopted. The body weight of kittens born by natural delivery was on average 77.5 g greater than that of kittens born by C-sec. However, the gap decreased with time. During the stray cat's pregnancy, fetal head diameter increased by 0.042 cm every day. Maximum head size before parturition was 2.43 cm. These results indicate that the weaning time for adoption of kittens was 5-week-old postpartum.

• Clinical and Experimental Reproductive Medicine
• /
• v.11 no.2
• /
• pp.69-76
• /
• 1984

In order to obtain high proportion of Y sperm the semen was laid over 6%,10% and 20% bovine serum albumin. Separated sperm were stained with quinacrine mustard in order to see F - body which could be seen in human Y sperm. But we could'nt find F-body in the bull sperm. So sperm were compared with size of sperm head. As a result of observation separated sperm was small in size of length and width of sperm head as compared with control sperm. So it was found that the proportion of Y sperm showed a marked increase in separated layer. Then the higher albumin density was, the higher the proportion of Y sperm which had smaller head and faster motility was. But the higher albumin density was, the lower the recovery rate of sperm was. So it was hard to separate Y sperm in oligospermia.

• Korean Journal of Applied Biomechanics
• /
• v.27 no.2
• /
• pp.149-155
• /
• 2017

Objective: The purpose of this study was to investigate the effects of three visual conditions (eyes opened, eyes closed, and wearing of a head mounted display [HMD]) on single-leg standing through kinematics and kinetic analysis. Method: Twelve college students (age: $24.5{\pm}2.6years$, height: $175.0{\pm}6.4cm$, weight: $69.2{\pm}5.1kg$) participated in this study. The study method adopted three-dimensional analysis with six cameras and ground reaction force measurement with one force plate. The analysis variables were coefficient of variation (CV) of the center of body mass, head movement, ground reaction force, and center of pressure, which were analyzed using one-way analysis of variance with repeated measures according to visual conditions. Results: In most cases, the results of this study showed that the CV was significantly higher in the order of HMD wearing, eyes closed, and eyes opened conditions. Conclusion: Our results indicated that body sway was the largest in the HMD wearing condition, and the risk of falling was high owing to the low stability.

• Korean Journal of Bronchoesophagology
• /
• v.19 no.1
• /
• pp.28-30
• /
• 2013

Foreign bodies in the oral cavity and pharyngolarynx are frequently observed accidental cases in the otolaryngological fields. Most foreign bodies can be recognized and removable with the manipulation of endoscopes and various instruments. However, foreign bodies that penetrate the oral cavity and oropharynx to appear as a tongue mass are rare. Therefore, such cases easily can be misconceived as tongue tumor at first, so it must involve a more thorough search utilizing such aids as computed tomography. Depending on their location and size, their removal may involve surgical intervention. The authors experienced such a rare case of an elderly male patient, presenting as tongue mass. We hereby report this case along with the relevant literature.

• Journal of radiological science and technology
• /
• v.27 no.2
• /
• pp.21-27
• /
• 2004

This study was conducted to estimate absorbed radiation doses associated with CT examinations. We compared CT dose index between single detector CT and multi detector CT. To establish radiation dose criteria in CT examination in Korea, we measured radiation dose for CT examinations in Seoul and kyungki-do. The results obtained were as follows ; 1. Averaged CTDIW value per 100 mAs was $13.5{\pm}3.2\;mGy$, and ranged from 8.1 mGy to 19.1 mGy in head phantom, was $7.1{\pm}2.0\;mGy$, and ranged from 3.7 mGy to 10.9 mGy in body phantom. 2. CTDIW was 3.2 mGy(1.26 times) larger in multi detector CT than single detector CT in head phantom, and 2.1 mGy(1.34 times) larger in body phantom. 3. The dose was the highest in 4 channel multi detector CT, and followed 8 channel multi detector CT, 16 channel multi detector CT and single detector CT in head phantom. And the dose was the highest in 4 channel and 8 channel multi detector CT, and followed 16 channel multi detector CT and single detector CT in body phantom.

• KIPS Transactions on Software and Data Engineering
• /
• v.8 no.11
• /
• pp.457-464
• /
• 2019

The weight of pig is one of the main factors in determining the health and growth state of pigs, their shipment, the breeding environment, and the ration of feed, and thus measuring the pig's weight is an important issue in productivity perspective. In order to estimate the pig's weight by using the number of pig's pixels from images, acquired from a Top-view camera, the posture determining and the head removal from images are necessary to measure the accurate number of pixels. In this research, we propose the fast and accurate method to determine the pig's posture by using a fast image processing technique, find the head location by using a fast deep learning technique, and remove pig's head by using light weighted image processing technique. First, we determine the pig's posture by comparing the length from the center of the pig's body to the outline of the pig in the binary image. Then, we train the location of pig's head, body, and hip in images using YOLO(one of the fast deep learning based object detector), and then we obtain the location of pig's head and remove an outside area of head by using head location. Finally, we find the boundary of head and body by using Convex-hull, and we remove pig's head. In the Experiment result, we confirmed that the pig's posture was determined with an accuracy of 0.98 and a processing speed of 250.00fps, and the pig's head was removed with an accuracy of 0.96 and a processing speed of 48.97fps.