• 상하수도학회지
• /
• 제23권4호
• /
• pp.447-458
• /
• 2009

Energy loss at manholes, often exceeding friction loss of pipes under surcharged flow, is considered as one of the major causes of inundation in urban areas. Therefore, it is necessary to analyze head loss at manholes, especially in case of surcharged flow. Hydraulic experiments were conducted with three cases. Case A is to test whether the shapes of the manholes influence head loss coefficients. Case B and C were proposed to further reduce head losses by improving the manhole hydraulic efficiency. In case B, the joining part of the pipe at both shapes of manholes is shifted from central part to side part. The test in case C is to check the average head loss coefficient by installing the side benching in square manhole, based on shifted joining part model. The average head loss coefficient for circular and square manhole on case A was 1.6. This did not show much difference of the head loss coefficients in spite of the discharge variation in this case. However, case B and C show large difference between head loss coefficients due to the strong oscillation of water surface and the horizontal swirl motion. The circular and square manholes in case B reduced the head loss by 30% and 6% than ones in case A, respectively. The average head loss coefficient for circular manhole in case B was 1.1. Case C reduced average loss coefficients of the square manhole in case A from 1.6 to 1.1. Accordingly, the circular manhole in case B and the square manhole in case C showed the effective way to reduce the head loss. These head loss coefficients could be available to apply to the urban sewer system with surcharged flow.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.731-734
• /
• 2008

Urban sewer systems are designed to operate in open-channel flow regime and energy loss at circular manholes are usually not significant. However, the energy loss at manholes, often exceeding the friction loss of pipes under surcharge flow, is considered as one of the major causes of inundation in urban area. Therefore, it is necessary to analyze the head loss associated with manholes, especially in surcharge flow. Hydraulic experimental apparatus with two circular manholes was installed for this study. The range of the experimental discharges were from $1.0\ell/sec$ to $4.4\ell/sec$. Head loss coefficient was maximum because of strong oscillation of water surface when the range of manhole depth ratios$(h_m/D_{in})$ were from 1,2 to 1.25. The average head loss coefficients for upstream manhole and downstream manhole were 0.58 and 0.23 respectively. Head loss at upstream manhole is nearly 2.5 times more than one at downstream manhole.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.60-68
• /
• 2010

In this study, the seepage flow monitoring method by hydaulic head loss rate graph was developed for the purpose of monitoring the seepage flow from the see side or from the lake on sea dike in which seepage force was varied periodically. The hydraulic head loss rate was defined in this method. The value of the rate is in the range from 0 to 1. the value of 0 means perfectly free flow of seepage. the value of 1 means perfect waterproofing. The value of coefficient of determination in the hydraulic head loss rate graph closer to 1 means that the seepage flow way is stable. The value of coefficient of determination in the hydraulic head loss rate graph closer to 0 means that the hole may exist or the piping may be in the progress. The pore water pressure data measured in Saemangeum sea dike was analyzed with the developed method The result showed that the variation of seepage flow state was detected sensitively by this method and the interception effect of sea dike could be estimated quantitatively.

• 대한토목학회논문집
• /
• 제37권6호
• /
• pp.989-999
• /
• 2017

본 연구에서는 분기수로에서 발생되는 에너지손실을 계산하기 위한 손실계수의 경험식을 산정하기 위해 수리모형실험을 수행했다. 수리모형은 유입수로와 90도의 각도를 갖는 두 유출수로로 구성되어 있으며, 유입수로과 유출수로에서 압력수두와 속도수두를 측정하여 분기수로에서 발생되는 에너지손실을 분석했다. 각 측선에서 동수경사선의 변화를 비교한 결과, 수로의 분기점에서 동수경사선이 급격히 하강하여 에너지손실이 분기점에서 발생되었으며, 유량비의 증가에 따라 속도수두의 감소폭이 증가했다. 유량비와 Froude수가 증가함에 따라 유출량이 더 큰 수로에서 수두손실량이 지수적으로 증가하는 결과를 보였으며, 손실계수 또한 증가했다. 반면에, 유출량이 작은 수로에서는 유량비와 Froude수의 증가에 따라 손실계수가 감소하는 결과가 나타났다. 손실계수 계산결과를 이용하여 두 유출수로에서 손실계수 경험식을 제안하였으며, 경험식의 계산오차가 각각 3.91%, 5.19%로 나타났다. 그리고 두 경험식을 이용하여 계산한 총 손실계수를 실험결과와 비교하여 3.62%의 오차가 발생했다.

• 상하수도학회지
• /
• 제22권6호
• /
• pp.619-625
• /
• 2008

Urban sewer systems are designed to operate in open-channel flow regime and energy loss at square manholes is usually not significant. However, the energy loss at surcharged manholes is considered as one of the major causes of inundation in urban area. Therefore, it is necessary to analyze the head loss associated with manholes, especially in surcharged flow. Hydraulic experimental apparatus which can change the manhole inner profile(CASE I, II, III, and IV) and the invert types(CASE A, B, C) were installed for this study. The experimental discharge was $16{\ell}/sec$. As the ratio of b/D(manhole width/inflow pipe diameter) increases, head loss coefficient increases due to strong horizontal swirl motion. The head loss coefficients for CASE I, II, III, and IV were 0.46, 0.38, 0.28 and 0.37, respectively. Side covers increase considerably drainage capacity at surcharged square manhole when the ratio of d/D(side cover diameter/inflow pipe diameter) was 1.0. The head loss coefficients for CASE A, B, and C were 0.45, 0.37, and 0.30, respectively. Accordingly, U-invert is the most effective for energy loss reduction at surcharged square manhole. This head loss coefficients could be available to evaluate the urban sewer system with surcharged flow.

• 한국수자원학회논문집
• /
• 제50권12호
• /
• pp.877-887
• /
• 2017

도시유역의 중 하류부에 주로 설치되는 4방향 합류맨홀에서 과부하 흐름에 의한 에너지 손실은 도심지 침수피해를 가중시키는 주요 원인이다. 과부하 4방향 합류맨홀에는 유입관의 유입조건에 따라 흐름 양상이 크게 변화되며, 중간맨홀 뿐만 아니라 3방향(T형) 합류맨홀의 흐름조건을 구성한다. 그러므로 유입관의 유입유량 변화에 따른 과부하 4방향 합류맨홀의 에너지 손실 변화 분석 및 손실계수 산정이 필요하다. 본 연구에서는 하수도시설기준을 준용하여 맨홀직경 및 관경을 1/5로 축소 한 수리실험 장치를 제작하였다. 과부하 사각형 4방향 합류맨홀에서 유입관의 유입유량비 변화에 따른 손실계수를 산정하기 위하여 유입관(주 유입관 및 양측면 유입관)의 유입유량비를 10% 간격으로 변화시켜 다양한 유량조건(40 case)을 선정하였다. 실험 결과 중간맨홀에서 0.40의 가장 낮은 손실계수가, $90^{\circ}$ 접합맨홀에서 1.58의 가장 높은 손실계수가 산정되었다. 또한 합류맨홀(T형, 4방향)의 경우 측면 유입유량이 한쪽으로 편향될수록 보다 큰 손실계수를 나타냈다. 유입관의 유입유량 조건 변화에 따른 손실계수를 산정하여 손실계수 범위도를 작도하였으며, 과부하 사각형 4방향 합류맨홀에서 모든 흐름조건을 고려할 수 있는 손실계수 산정식을 제시하였다. 제시된 산정식은 유입관의 유입유량이 변화하는 배수시스템의 설계 및 검증에 적용이 가능할 것으로 판단된다.

• Smart Structures and Systems
• /
• 제9권2호
• /
• pp.165-188
• /
• 2012

In the first part of the paper, the optimal design parameters for tuned liquid column dampers (TLCD) in harmonic pitching motion were investigated. The configurations in design tables include uniform and non-uniform TLCDs with cross-sectional ratios of 0.3, 0.6, 1, 2 and 3 for the design in different situations. A closed-form solution of the structural response was used for performing numerical optimization. The results from optimization indicate that the optimal structural response always occurs when the two resonant peaks along the frequency axis are equal. The optimal frequency tuning ratio, optimal head loss coefficient, the corresponding response and other useful quantities are constructed in design tables as a guideline for practitioners. As the value of the head loss coefficient is only available through experiments, in the second part of the paper, the prediction of head loss coefficients in the form of a design chart are proposed based on a series of large scale tests in pitching base motions, aiming to ease the predicament of lacking the information of head loss for those who wishes to make designs without going through experimentation. A large extent of TLCDs with cross-sectional ratios of 0.3, 0.6, 1, 2 and 3 and orifice blocking ratios ranging from 0%, 20%, 40%, 60% to 80% were inspected by means of a closed-form solution under harmonic base motion for identification. For the convenience of practical use, the corresponding empirical formulas for predicting head loss coefficients of TLCDs in relation to the cross-sectional ratio and the orifice blocking ratio were also proposed. For supplemental information to horizontal base motion, the relation of head loss values versus blocking ratios and the corresponding empirical formulas were also presented in the end.

• Journal of Biosystems Engineering
• /
• 제4권2호
• /
• pp.46-52
• /
• 1979

The water delivery hose for agricultural pump is getting popular in rural areas in korea. Friction head loss, discharge, and power requirements were measured in various discharge for different material and diameter of hose to get basic data for economical use in agricultural pump. The results attained in this study were as follows ; 1. Friction head loss increased significantly as the velocity increased, and the difference of velocity between the different diameter of hose was bigger than that between materials, which was resulted in the increase of the friction head loss. 2. Friction head loss in the case of that the velocity with 2m/sec was constant was about 3.53 to 4.01 m/100m in the diameter 3" and about 2.30 to 3.10 m/100m in the diameter 4". Material A of diameter 3" showed the maximum value 8.4m/100m in Reynolds number $2.0\times10^5$, 4" got the minimum value 2.24m/100m, the difference between these values was bigger than 6m per 100 meters in the friction head loss. 3. Darcy-Weisbach formular with friction coefficient [f] calculated by Nikurades formular in the smooth pipe or with friction coefficient [f] calculated on the base of C value 125 in Hazen-Williams formular was available in friction head loss of the water discharger hose in rural areas. 4. Total head increased as friction head loss increased , meanwhile total discharge decreased, and 20 percents of energy was more saved in Material C 4″pipe than Material A 3″pipe in the view point from the discharge per unit power requirement, this phenomenon suggested that long distance pipe would be advantage in larger diameter pipe for save of energy. for save of energy.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.199-202
• /
• 2007

In storm sewer networks a lot of manholes are installed to maintain and connect a sewer of urban area. There are some shapes of manhole such as circular type, square type, and so on. Square shape manholes are installed to connect the large diameter drainage pipes in general and have lager head losses than circular one. Consequently, it is important to analyze the head losses in square manhole because the head losses in square manhole are much bigger than the friction losses in pipes. Hydraulic experimental apparatus which can be changed the inside shape in square manhole was installed for this study. The experimental discharge was $16{\ell}/sec$. The head loss coefficients in the manhole were calculated by the experimental results. The range of head loss coefficients in the general square manhole were from 0.33 to 0.48 and the range of head loss coefficients in the square manhole changed inside shape were from 0.23 to 0.28.

• 한국수자원학회논문집
• /
• 제41권3호
• /
• pp.305-314
• /
• 2008

도시 우수 배수 시스템에서 우수 관거는 개수로 흐름 상태로 가정하여 설계되었기 때문에 맨홀에서의 에너지 손실은 일반적으로 중요하게 고려되지 않았다. 그러나 과부하흐름에서 에너지 손실은 관거의 배수능력을 저하시켜 도심지역의 침수피해를 가중시키는 요인이 된다. 그러므로 과부하 맨홀 내에서의 수두 손실을 분석할 필요가 있다. 본 연구에서는 맨홀에 대한 문헌조사 및 현장조사를 실시하여 실험장치 제작과 실험조건을 선정하였다. 선정된 실험조건인 인버트 형상 조건(CASE A, B, C), 단차 조건(CASE I, II, III) 및 실험 유량($1.0\;{\sim}\;5.6\;{\ell}/sec$)을 변화시키면서 실험을 실시하였다. 맨홀 직경($D_m$)과 유입관경($D_{in}$)의 비($D_m/D_{in}$)가 증가할수록 손실계수가 증가하였으며, 맨홀 수심($h_m$)과 유입관거 직경($D_{in}$)의 비($h_m/D_{in}$)가 $1.0{\sim}1.5$일 때 손실계수가 가장 크게 산정되었다. 또한, CASE A, B, C의 평균 손실계수는 각각 0.45, 0.37, 0.3으로 산정되었다. 맨홀에 U자형 인버트를 설치하면, 원형 맨홀에서 에너지 손실을 저감시킬 수 있다. 또한 산정된 맨홀에서의 손실계수는 과부하흐름을 고려한 우수 관거 설계에 활용될 수 있다고 판단된다.