• Transactions of Materials Processing
• /
• v.14 no.7 s.79
• /
• pp.607-612
• /
• 2005

In this paper, warm deep drawing process with local heating and cooling technique was attempted to improve the formability of AZ31 magnesium alloy which is impossibly to form by conventional methods at room temperature by finite element method and experiment. For FE analysis, in first model with considering heat transfer, both die and blankholder were heated to 573K while the punch was kept at room temperature by cooling water. Also distribution of thickness and von Mises stress at room temperature and 498k for warm deep drawing were compared by FEM. Uniaxial tension tests at elevated temperature were done in order to obtain the temperature dependence of material constant under temperature of $293K\~573K$ and cross head velocity of $5\~500mm/min$. The phenomenological model for warm deep drawing process in this work was based on the hardening law and power law strain rate dependency. Deep drawing experiment were conducted at temperatures of room temperature, 373K, 423K, 473K, 498K, 523K, and 573K for the blank and deep drawing tools(holder and die) and at a punch speed of 10mm/min.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.42 no.6
• /
• pp.379-382
• /
• 2016

Cutaneous lymphoid hyperplasia (CLH) is a cutaneous pseudolymphoma with a worldwide distribution, equally affecting all races and ethnic groups. Due to its vast array of characteristics, it is most often missed in the differential diagnosis of firm to soft lumps on the head and neck. A systematic approach to the workup and diagnosis along with treatment of such lesions is discussed in this article. A 20-year-old Asian Indian female presented to our Oral and Maxillofacial unit with a lump on the left side of her forehead for 1 month. Local examination revealed a $2.5{\times}3.0cm^2$, well circumscribed swelling over the left para median region that was firm to doughy and non-tender. There was no other significant finding on general examination. Excisional biopsy of the lesion was performed, followed by histopathologic processing. The general etiology, pathogenesis, clinical presentation, differential diagnosis, clinical course, prognosis, treatment, and prevention have been discussed in line with the recent modalities of diagnosis and treatment of CLH. Due to the overlapping clinical and histological characteristics of CLH with many other lesions, it is important to consider this lesion in the differential diagnosis of cutaneous lesions.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.225-228
• /
• 2009

Hot-firing tests were performed on the gas generator which is a technology development/demonstration model for a 75 ton-class liquid rocket engine. A heat-sink type combustion chamber was used for initial performance examination of the injector and mixing head. This paper explains not only preparation works for hot-firing tests but also the acquired results such as pressure, temperature distribution, and pressure fluctuation.

• Journal of Chest Surgery
• /
• v.28 no.6
• /
• pp.601-605
• /
• 1995

Clinical evaluations were performed on 54 cases of the traumatic sternal fracture, those were admitted and treated at the department of Thoracic and Cardiovascular Surgery in Chosun University Hospital during the past 5 years period from January 1990 to December 1994. The frequency was about 7.8% of the nonpenetrating chest trauma. The ratio of male to female was 2 : 1 in male predominance. Average age was 45.7 years old and age distribution was from 18 to 80 years old. The most common cause in the sternal fracture were high decelerating injury[ 38 cases . The most common fracture site was sternal body. Associated intrathoracic organ injuries were cardiac contusion[11cases , hemopneumothorax and pulmonary contusion. Added, thoracic cage and extrathoracic organ injuries were rib fracture, head injuries, thoracic spinal fracture and long bone fracture. Abnormal ECG findings were sinus bradycardia[4 cases , sinus tachycardia[3 cases , bundle branch block, atrial fibrillaton, left ventricular hypertrophy and myocardial ischemia. The average days of admission was 19.1 days. All patients were treated with conservative treatment. The complications after treatment were atelectasis[2 cases ,empyema[1 cases , ARDS[1 cases .

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.4
• /
• pp.353-362
• /
• 1996

In this paper, SAR distribution is calculated according to the rabbit's head using approximation of its medium three layers model. Our experiment was classified 5 groups dependent on the power intensity of 2,450MHz microwave to measure EEG(Electroencephalograph) of rabbit, which was checked in left frontal lobe before and after irradiation of microwave. In results, mean total power of EEG was slightly decreased and mean composition percentages of $\theta$, $\delta$ and $\beta$ wave were increased after irradiation in observation. It means to decrease of elect- rophysiologic activity and trend of fast wave in brain after irradiation of its microwave. We analyzed the electrophysiological effect of the biobody quantitatively using measured EEG and estimated MPE (Maximum Permissible Exposure).

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.11 s.254
• /
• pp.1027-1034
• /
• 2006

In order to investigate flow characteristics of chicken blood in a micro tube of 100$\mu$m in diameter, in-vitro experiments were carried out using a micro-PIV technique. The micro-PIV system consists of a microscope, 2-head Nd:YAG laser, 12 bit cooled CCD camera and a delay generator. Chicken blood with 40% hematocrit was supplied into a micro tube using a syringe pump. The blood flow shows clearly the cell free layer near the tube wall and its thickness is increased with increasing the flow speed. The hemorheological characteristics of chicken blood, including shear rate and shear stress were estimated from the PIV velocity field data obtained. Since the aggregation index of chicken blood is less than 50% of human blood, non-Newtonian flow characteristics of chicken blood are smaller than those of human blood. As the flow rate increases, the degree of flatness in the velocity profile at the center region is decreased and the parabola-shaped shear stress distribution becomes to have a linear profile. Under the same flow rate, chicken blood shows higher shear stress, compared with human blood.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.40 no.3
• /
• pp.147-152
• /
• 2007

Spermiogenesis and mature spermatozoa of the Korean false minnow Pseudogobio esocinus (Cyprinidae) are described by means of scanning and transmission electron microscopy. Spermiogenesis is characterized by lateral development of the flagellum, absence of nuclear rotation, and eccentric nuclear fossa formation. The spermatozoa have a spherical head containing a nucleus with highly condensed chromatin and no acrosome. The nuclear fossa contains the proximal centriole and anterior part of the distal centriole. The midpiece is type A II and contains semi-fused mitochondria around the axoneme. However, the symmetrical distribution of 4 or more the mitochondria does not follow a general pattern of the cyprinid spermatozoa. Cytoplasmic vesicles in the midpiece are common in Cypriniformes and some of Siluriformes and Characiformes spermatozoa.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.450-454
• /
• 1997

This system is the automatic boiler tube bending equipment which has four heads for bending the tube and the carriage for moving the tube. The system consists of two frames for transporting each moving parts, high-frequency heating equipment for heating the tube in hot bending, control panel for inputting the job data operating, remote control unit for concetration and distribution of input/output, and the monitoring system which can establish unmanned operationby receiving the bending job data via LAN form a design teamwhich produces the job data and schedule based on master production plan and diagnoses bending data change, input, whole system status, and system malfunctions. By employing this system, 30% of production improvement was achieved was achieved comparing to the existing bending system.

• Advances in aircraft and spacecraft science
• /
• v.4 no.4
• /
• pp.487-501
• /
• 2017

The main purpose of the paper is to analyze effect of geometrical parameters of the reentry capsules such as radius of the spherical cap, shoulder radius, back shell inclination angle and overall length on the flow field characteristics. The numerical simulation with viscous flow past ARD (Atmospheric Reentry Demonstrator), Soyuz (Russian) and OREX (Orbital Reentry EXperimental) reentry capsules for freestream Mach numbers range of 2.0-5.0 is carried out by solving time-dependent, axisymmetric, compressible laminar Navier-Stokes equations. These reentry capsules appear as bell, head light and saucer in shape. The flow field features around the reentry capsules such as bow shock wave, sonic line, expansion fan and recirculating flow region are well captured by the present numerical simulations. A low pressure is observed immediately downstream of the base region of the capsule which can be attributed to fill-up in the growing space between the shock wave and the reentry module. The back shell angle and the radius of the shoulder over the capsule are having a significant effect on the wall pressure distribution. The effects of geometrical parameters of the reentry capsules will useful input for the calculation of ballistic coefficient of the reentry module.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.27 no.1
• /
• pp.3-15
• /
• 2001

The bilayer forming ability of pseudo-ceramide PC104 in octanoic acid/water/n-octyl $\beta$-D-glucoside mixtures was investigated through the phase diagram. Because of its low solubility in water and of its crystallization, pseudoceramide PC104 was dissolved in octanoic acid, which is nontoxic additive for foods and cosmetics. The mixtures formed four different phases (L1, L2, LC and two phases). Depending on the concentration of PC104 in octanoic acid, the region of each phase was extended or contracted. On the contrary to the region of L2, regions of lamellar phase and L1 phase were expanded. The bilayer-forming ability of PC104 was explained on the basis of concentration of PC104 at interface and interaction between PC104 and octanoic acid. From FT-IR results, it was found that the interactions of PC104’s polar head group with octanoic acid increased as the amount of PC104 in octanoic acid increased. Also emulsion size and size distribution have been studied depending upon the emulsification path. droplets of emulsion prepared from lamellar phase were smaller and more homogeneous compared to those of emulsions formed from L2 phase.