• Journal of Chest Surgery
• /
• v.28 no.9
• /
• pp.842-846
• /
• 1995

Recently, the trauma patients have been markedly increasing due to the vast increase of traffic accident, industrial disaster, incidental accident and violence. The authors have analysed of 22 patients of thoracic injuries combined with abdominal injuries and summarized as follows. The ratio of male to female was 3.4:1 and their age distribution was from 5 years to 68 years and mean age was 34.4 years. The etiologies of injury were traffic accident, stab wound, fall down and violence. Associated injuries were fractures, bowel perforation, kidney rupture, head injury, liver laceration, spleen rupture and so forth. The modes of treatment were closed thoracostomy, repair of diaphragm, ruptured bowel repair, explo-thoracotomy, splenectomy, hepatic lobectomy in this order of frequency. The postoperative complications were atelectasis, wound infection, pneumonia, empyema, acute renal failure, respiratory failure and bleeding. The mortality rate was 13.6% [3/22 and the causes of death were respiratory failure 1 case, acute renal failure 1 case and hypovolemic shock 1 case.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1228-1231
• /
• 2004

We analyzed the impulse on 24 sensors location under the foot using the Parotec system for the investigation of the relationship between the shoe type and the foot pathologies. Total 7 kinds of shoes, i.e. sport shoe, high heel shoes (5cm heel, 8cm heel, 13cm heel), platform shoe, inline skate, and heelys were evaluated for 20 normal subjects. Compared with the impulse distribution of the sport shoe, greater impulses were shown at the 1$^{st}$ phalange and the 1$^{st}$ metatarsal-phalangeal head in high-heel shoes, lateral tarsal bone and medial metatarsal bone in platform shoe, medial tarsal bone in inline-skate, and medial tarsal bone and 1st phalange in heelys shoe. The result of this study is expected to provide useful information about the relationship between the shoe type and the foot pathologies.ies.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.411-416
• /
• 2002

With a rapid industrialization, repair and strengthening methods for a damaged bridges are raised a head in face of safety and reduction of physical distribution costs of bridges. Above all, external prestressing method has the high adaptability for concrete structures and the reliable effect of strengthening. Innovative ideas for bridges strengthening were considered along with established methods. That methods are identified, described. However there is not a systematic and categorized manual for external prestressing method. This study will provide a systematic and reliable manual with investigating the arrangement shape of cable and characteristics of brackets. And the key result of this study is an extensive compilation, which can be used by practicing engineers, of the most effective techniques for strengthening existing bridges.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.05a
• /
• pp.68-74
• /
• 2002

The tensile tests to identify the statistical tensile properties and the acoustic emission characteristics were conducted for STS304 stainless steel at $600^{\circ}C,\;700^{\circ}C$. From tensile tests performed by constant cross head speed controls with 1mm/min, rates at each elevated temperature, the scatters were observed in tensile strength, reduction of area, elongation and the acoustic emission parameters. The effect of temperature on the scatter of tensile behavior was larger at $700^{\circ}C$. The distributions of tensile properties was well followed in 3-parameter Weibull. The AE counts and energy of the $700^{\circ}C$ specimens were smaller than the $600^{\circ}C$.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.4
• /
• pp.88-96
• /
• 2002

The CSCM Upwind method and Material Transport Analysis(MTA) have been used to predict the thermal response and shape changes for charring/non-charring material which can be used as thermal protection material(TPM) on blunt-body nose tip. We performed intensive flight trajectory simulations to compare 1-D MTA results with those of 2-D/Axisymmetric MTA by using MTAs and Navier-Stokes code. Theheat-transfer rate and pressure distribution were predicted at selected altitudes and wall temperature along the flight trajectory and the shape changes of blunt-body nose tip were predicted subsequently by using current procedure.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.3
• /
• pp.404-412
• /
• 2008

As a suitable volute configuration in the range of low specific speed, circular casing is suggested in this study. The internal flows in a centrifugal pump with the circular and spiral casings are measured by PIV and analyzed by CFD. The results show that the head and efficiency of the pump by a circular casing of very small radius are almost same as those by the spiral casing. Even at the best efficiency point, the internal flow of the pump by circular casing is asymmetric, and vortex and strong secondary flow occurs in the impeller passage. The radial velocity becomes higher remarkably only near the region of the discharge throat. The flow in the impeller outlet is strongly controlled by the circular casing because the velocity distribution almost does not affected by the position of the impeller blades.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.10
• /
• pp.1335-1342
• /
• 2000

Three-dimensional flow analysis and numerical optimization methods are presented for the design of an axial-flow fan. Steady, incompressible, three-dimensional Reynolds-averaged Navier-Stokes equations are used as governing equations, and standard k- ${\varepsilon}$ turbulence model is chosen as a turbulence model. Governing equations are discretized using finite volume method. Steepest descent method, conjugate gradient method and BFGS method are compared to determine the searching directions. Golden section method and quadratic fit-sectioning method are tested for one dimensional search. Objective function is defined as a ratio of generation rate of the turbulent kinetic energy to pressure head. Two variables concerning sweep angle distribution are selected as the design variables. Performance of the final fan designed by the optimization was tested experimentally.

• KSTLE International Journal
• /
• v.5 no.2
• /
• pp.52-56
• /
• 2004

The hard disk drive performance depends strongly on air bearing characterisitcs of the head slider. The objective of the slider design is to provide accurate positioning of the magnetic read/write element at the very small height above the disk. Application of the numerical methods is required due to complexity of the air bearing surface of the slider. The Boundary-Fitted Coordinate System Divergence Formulation method can be used for calculation of pressure distribution in the case of steep film thickness gradients. In the present work, the interpolating functions used in the expression for the Couette flow are modified in order to improve the solution characteristics in the extremely high compressibility number region. The advantages of the modified method are demonstrated on example of the flat skewed slider. Finally, the modi.ed method is applied to analysis of the static characteristics of the femto-slider. The analysis results indicate the effect of the silder's air bearing surface crown on the flying height and the pitching angle in steady state position.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.3
• /
• pp.9-17
• /
• 2001

This paper is the second of 3 companion papers which investigate axial stratification process. In-cylinder fuel behavior has been investigated in the port injected Sl engine by visualizing for the purpose of understanding stratification. Planar laser light sheet from an Nd:YAG laser has been illuminated through the transparent quartz cylinder of the single cylinder optical engine and the Mie scattered light has been captured through the quartz window in the piston head with an ICCD camera. Fuel has been replaced with an air-ethanol mixture to utilize atomized fuel spray fur the visualization purposes. This results have been compared with steady flow concentration measurement. For low/medium swirl port, the early injection makes such a fuel distribution state that is upper-rich, middle-lean and lower-rich along the combustion chamber and cylinder by tumbling motion. On the other hand, the late injection induces upper-rich, middle-lean and lower-rich state due to the short fuel penetration.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.3
• /
• pp.1-12
• /
• 1994

A model engine having a flat cylinder head and a piston face and an off-center intake valve is investigated in this analysis. Calculation domain is confined to the half of the cylinder with swirl free inlet velocity condition. Due to the absence of measured inlet conditions, the inlet flowrates during induction period are calculated from overall mass and energy conservation requirements. Finite difference equation for velocity and pressure were solved by modified SIMPLER algorithm, standard k-$\varepsilon$turbulence model and hybrid scheme. From the result of prediction, dimensionless velocity distribution and turbulence intensities are investigated at each crank angle.