• Journal of Environmental Health Sciences
• /
• v.30 no.2
• /
• pp.154-160
• /
• 2004

The purpose of this study was to evaluate airborne concentrations and characteristics of TSP, IPM, TPM and RPM in Seoul subway stations. Sampling was performed at 14 stations from April 11 to 29, 2002. Size-selective dust concentrations and metal concentrations were measured by gravimetric method and ICP-AES, respectively. The geometric mean of TSP, IPM, TPM and RPM concentrations in Seoul subway stations were 176$\mu\textrm{g}$/㎥, 348$\mu\textrm{g}$/㎥, 158$\mu\textrm{g}$/㎥ and 104$\mu\textrm{g}$/㎥, respectively. Dust concentrations in pathway were the highest and those in lobby were the lowest. The size distribution of dusts was significantly different by location of collection. When the deposition rate into pulmonary gas exchange region was estimated by size distribution, the deposition rate of dust collected from platform was higher than those of dust collected from lobby and pathway. The lower the basement levels were, the higher the deposition rates of dusts into tracheobronchial region and gas exchange region were. Copper and iron concentrations measured in platform higher were than those in other areas.

• Journal of Ginseng Research
• /
• v.7 no.1
• /
• pp.44-50
• /
• 1983

This study was conducted to investigate distribution of free sugas in the ginseng plant and change of free sugar content in dried ginseng with various drying conditions. The results obtained are as follows: 1. The total free sugar content is about 1% in the root and about 2% in the upland portions. Sucrose which accounts 80% in those free sugars, is 0.91% in main body 0.90% in raw ginseng, 0.74% in latheral root, 0.67% in head, 0.57% in skin, 0.64% in leaves, and 0.35% in steins. 2. Sucrose content is 3.3~4.6% in the ginseng root dried at temperature of 3$0^{\circ}C$ and 0.5 ~ 1% in the root dried it at temperature of 50-9$0^{\circ}C$. 3. Maltose was not present in fresh ginseng or dried ginseng which was dried under the t, but it was produced dried at the temperature above 5$0^{\circ}C$, it was 0.5% at 5$0^{\circ}C$, 1.49 %. at 7$0^{\circ}C$, and 4.03% at 9$0^{\circ}C$, respectively. This sugar Height be produced by endogenous saccharifying enzymes.

• Korean Journal of English Language and Linguistics
• /
• v.4 no.2
• /
• pp.117-149
• /
• 2004

The paper is to argue against the asymmetric CP-V2 analysis of Old English, according to which finite verbs invariably undergo movement into a clause-final T within subordinate clauses and reach the functional head C within main clauses. The asymmetric CP-V2 analysis, first of all, faces difficulty in explaining a wide range of post-verbal elements within subordinate clauses. To resolve the problem, the analysis has to abandon the obligatoriness of V-to-T movement or introduce various types of extraposition whose status is dubious as a legitimate syntactic operation. Obligatory V-to-T movement in Old English lacks conceptual justification as well. Crosslinguistic evidence reveals that morphological richness in verbal inflection cannot entail overt verb movement. Moreover, the operation is always string-vacuous under the asymmetric CP- V2 analysis and has no effect at the interfaces, in violation of the principle of economy. The distribution of Old English finite verbs in main clauses also undermines the asymmetric CP-V2 analysis. Conceptually speaking, a proper syntactic trigger cannot be confirmed to motivate obligatory verb movement to C. The operation not only gets little support from nominative Case marking, the distribution of expletives, or complementizer agreement but also requires the unconvincing stipulation that expletives as well as sentence-initial subjects result from string-vacuous topicalization. Finally, textual evidence testifies that Old English sometimes permits non-V2 ordering patterns, many of which remain unexplained under the asymmetric CP-V2 analysis.

• International Journal of Fluid Machinery and Systems
• /
• v.3 no.1
• /
• pp.20-28
• /
• 2010

This paper deals with the Design and Analysis of a Controlled Diffusion Aerofoil (CDA) Blade Section for an Axial Compressor Stator and Effect of incidence angle and Mach No. on Performance of CDA. CD blade section has been designed at Axial Flow Compressor Research Lab, Propulsion Division of National Aerospace Laboratories (NAL), Bangalore, as per geometric procedure specified in the U.S. patent (4). The CFD analysis has been performed by a 2-D Euler code (Denton's code), which gives surface Mach No. distribution on the profiles. Boundary layer computations were performed by a 2-D boundary layer code (NALSOF0801) available in the SOFFTS library of NAL. The effect of variation of Mach no. was performed using fluent. The surface Mach no. distribution on the CD profile clearly indicates lower peak Mach no. than MCA profile. Further, boundary layer parameters on CD aerofoil at respective incidences have lower values than corresponding MCA blade profile. Total pressure loss on CD aerofoil for the same incidence range is lower than MCA blade profile.

• Journal of Environmental Health Sciences
• /
• v.26 no.2
• /
• pp.116-121
• /
• 2000

This study was performed to investigate the heavy metal contents and distribution in bioorganisms from the estuary area of Mankyeong-Dongjin river. In paddy plant, the average contents of heavy metals were in order of Zn>Cu>Pb>Cr>Cd in all parts. Those of Cd, Cr, Pb and Cu were all highest in the leaf while lowest in the brown rice. The average content of Zn was almost similar in all parts. In the dried muscular parts of shellfish, the average contents of heavy metals were in the range of 1.06~1.95 mg/kg for Cd, 2.93~4.98 mg/kg for Cr, 0.90~1.17 mg/kg for Pb, 8.41~18.58 mg/kg for Cu and 29.81~67.31 for Zn, respectively, In fish(Acanthogobius hasta), the average contents of heavy metals in the dried body parts were in the range of 0.05~0.43 mg/kg for Cd, 0.65~4.59 mg/kg for Cr, 1.01~4.75 mg/kg for Pb and 1.34~4.19 mg/kg for Cu, with high accumulation in bone and head overally.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.2
• /
• pp.13-20
• /
• 2001

This proper presents the characteristics and their schemes for omission of lighting arresters on one-phase and over-head ground wire in the power distribution line. The case studies for Japan were investigated and compared with the cases of Korea. Especially, the EMTP simulation was performed for the omission scheme of lightning arrester's middle phase and the simulation results were described on the feasible problems when omitted. In this paper, it could be concluded that the omission of ground wire may be possible in some cases for the omission of lightning arresters, and in that case, the capacity of the lightning arresters should be Increase.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9B
• /
• pp.1601-1607
• /
• 1999

LMDS(Local Multipoint Distribution Service) is a broadband wireless transmission system in millimeter wave frequency. LMDS system is consisted with relay system to connect between head-end and hub and distribution system to connect between hub and subscribers. In this study, we develop point-to-point relay system to use back-bone system n LMDS network. We develop STM-1 transceiver over 27GHz and analyze the system performance. We can get the similar measurement results comparing the theoretical results and then prove that this system can fit LMDS back-bone network requirement. This is the first system in Korea and we expect this system can apply the various network.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.9
• /
• pp.44-52
• /
• 2013

This paper presents the development of 10 kW permanent magnet synchronous generator (PMSG) for small hydropower plants considering flow rates and net head. The initial and detailed design are determined using a load distribution method (LDM) which is a well-known method for designing an electric machine and a 2D-FEA which is performed for more accurate analysis of PMSG. The characteristic analysis results of proposed model with straight line magnet are satisfied with the initial model with curved magnet. Finally, the analysis and the design results are confirmed by the experimental results.

• Journal of Distribution Science
• /
• v.21 no.3
• /
• pp.83-92
• /
• 2023

Purpose: An omnichannel strategy creates a consistent brand image and customer experience across all channels, making it easier for customers to interact with a business and share information. This research aimed to investigated the relationship between consumers' information-sharing intention and their omnichannel experiences. Research design, data, and methodology: Through an online survey conducted in Vietnam, the study obtained 915 responses. The study used Partial Least Square Structural Equation Modeling (PLS-SEM) to analyze research data and confirm proposed research hypotheses. Results: Research results indicated that information-sharing intention is affected by both online and offline customer experience, and at the same time, the study also confirmed that omnichannel's three characteristics (integration, individualization, interaction) positively impact on customer experience. Conclusions: From the research result, businesses may boost consumer trust and loyalty with the help of an omnichannel approach, which in turn increases customers' propensity to provide personally identifying information to the firm. One way to do this is to facilitate information exchange by delivering customized and relevant offers. Furthermore, companies show consumers the benefit of providing their data by utilizing it to enhance the customer experience.

• Steel and Composite Structures
• /
• v.51 no.1
• /
• pp.63-72
• /
• 2024

This study delves into the interaction dynamics between lateral notches and inclusions, providing valuable insights for more effective engineering of structural components. By employing the finite element method, the research analyzes how inclusions affect the dimensions and contours of the plastic zone under confined plasticity conditions. Several parameters were investigated, including loading influence, the distance between the inclusion and notch tip, inclusion stiffness, and the distribution of Von Mises stress, as well as normal stresses σxx and σyy, and Comparison between different stresses. Examining stress distributions under varying loading conditions reveals a significant intensification, particularly near the crack tip. Moreover, the presence of an inclusion near the notch base reduces both the size and shape of the plastic zone. The distribution of the stresses for different loads knows an increase in intensity, especially near the crack head, which is the most requested by the tensile forces on its upper part, which can cause either the crack's initiation or opening, inducing significant stresses.