• The Journal of Engineering Geology
• /
• v.21 no.2
• /
• pp.163-178
• /
• 2011

A test borehole was drilled in the Cheongwon area to investigate the relationship between geochemical environment and the natural occurrence of radioactive materials (uranium and Rn-222) in borehole groundwater. The borehole encountered mainly biotite schist and biotite granite, with minor porphyritic granite and basic dykes. Six groundwater samples were collected at different depths in the borehole using the double-packed system. The groundwater pH ranges from 5.66 to 8.34, and the chemical type of the groundwater is Ca-$HCO_3$. The contents of uranium and Rn-222 in the groundwater are 0.03-683 ppb and 1,290-7,600 pCi/L, respectively. The contents of uranium and thorium in the rocks within the borehole are 0.51-23.4 ppm and 0.89-62.6 ppm, respectively. Microscope observations of the rock core and analyses by electron probe microanalyzer (EPMA) show that most of the radioactive elements occur in the biotite schist, within accessory minerals such as monazite and limenite in biotite, and in feldspar and quartz. The high uranium content of groundwater at depths of -50 to -70 m is due to groundwater chemistry (weakly alkaline pH, an oxidizing environment, and high concentrations of bicarbonate). The origin of Rn-222 could be determined by analyzing noble gas isotopes (e.g., $^3He/^4He$ and $^4He/^{20}Ne$).

• Applied Chemistry for Engineering
• /
• v.19 no.5
• /
• pp.477-483
• /
• 2008

$La_{0.7}Sr_{0.3}Co_{0.2}Fe_{0.8}O_{3-{\delta}$ oxide was synthesized by a citrate method and a typical dense membrane of perovskite oxide has been prepared using as-prepared powder by pressing and sintering at $1300^{\circ}C$. Precursor of $La_{0.7}Sr_{0.3}Co_{0.2}Fe_{0.8}O_{3-{\delta}$ prepared by citrate method was investigated by TGA and XRD. Metal-citrate complex in precursor was decomposed into perovskite oxide in the temperature range of $260{\sim}410^{\circ}C$ but XRD results showed $SrCO_3$ existed as impurity at less than $900^{\circ}C$. Electrical conductivity of membrane increased with increasing temperature but then decreased over $700^{\circ}C$ in air atmosphere ($Po_2=0.2atm$) and $600^{\circ}C$ in He atmosphere ($Po_2=0.01atm$) respectively due to oxygen loss from the crystal lattice. The oxygen permeation flux increased with increasing temperature and maximum oxygen permeation flux of $La_{0.7}Sr_{0.3}Co_{0.2}Fe_{0.8}O_{3-{\delta}$ membrane with 1.6 mm thickness was about $0.31cm^3/cm^2{\cdot}min$ at $950^{\circ}C$. The activation energy for oxygen permeation was 88.4 kJ/mol in the temperature range of $750{\sim}950^{\circ}C$. Perovskite structure of membrane was not changed after permeation test of 40 h and the membrane was stable without secondary phase change with 0.3 mol Sr addition.

• The Korean Journal of Mycology
• /
• v.6 no.1
• /
• pp.29-41
• /
• 1978

This study aims to brew apple wine containing lower concentration of alcohol by fermentation and to retain $CO_2$ gas in apple wine, and investigation for the possibility of storage at room temperature was performed. A Saccharomyces sp. was proved to be acceptable for production of base wine as its higher fermentation rate at $20{\sim}25^{\circ}C$. However, B-2 was most reasonable for post-fermentation of apple wine as this strain strongly ferments sugars at low temperature $(4^{\circ}C)$. The yield of apple juice increased by maceration of apple pulps. The yield was about 5 % more than that of the unmacerated juice, whereas acid content was decreased by 10% compared with control. When stored apple wine containing 9% alcobol was introduced $1{\sim}3%$ sucrose at $7{\sim}8^{\circ}C$ for 100 days or more, the $CO_2$ pressure of apple wine in bottle shows $3kg/cm^2$ by bottle-pressure meter. It showed good storage of the wine at room temperature. $CO_2$ gas pressure in apple wine containing 6% alcohol, $5{\sim}10%$ hop extract, and 2% sugar was $2kg/cm^2$, he result also showed possibility of storage. Whereas 6% concentration of alcoholic apple wine without hop extract caused unusual fermentation during storage at the same condition. The desirable conditions for high quality apple wine should have $CO_2$ pressure of $2kg/cm^2$ or more and should be added $1{\sim}2% sugar to base wine. From these results, it can be concluded that the brewing of lower alcoholic apple wine is possible.

• Journal of the Korean Vacuum Society
• /
• v.18 no.4
• /
• pp.318-330
• /
• 2009

A high heat flux test facility using a graphite heating panel was constructed and is presently in operation at Korea Atomic Energy Research Institute, which is called KoHLT-1. Its major purpose is to carry out a thermal cycle test to verify the integrity of a HIP (hot isostatic pressing) bonded Be mockups which were fabricated for developing HIP joining technology to bond different metals, i.e., Be-to-CuCrZr and CuCrZr-to-SS316L, for the ITER (International Thermonuclear Experimental Reactor) first wall. The KoHLT-1 consists of a graphite heating panel, a box-type test chamber with water-cooling jackets, an electrical DC power supply, a water-cooling system, an evacuation system, an He gas system, and some diagnostics, which are equipped in an authorized laboratory with a special ventilation system for the Be treatment. The graphite heater is placed between two mockups, and the gap distance between the heater and the mockup is adjusted to $2{\sim}3\;mm$. We designed and fabricated several graphite heating panels to have various heating areas depending on the tested mockups, and to have the electrical resistances of $0.2{\sim}0.5$ ohms during high temperature operation. The heater is connected to an electrical DC power supply of 100 V/400 A. The heat flux is easily controlled by the pre-programmed control system which consists of a personal computer and a multi function module. The heat fluxes on the two mockups are deduced from the flow rate and the coolant inlet/out temperatures by a calorimetric method. We have carried out the thermal cycle tests of various Be mockups, and the reliability of the KoHLT-1 for long time operation at a high heat flux was verified, and its broad applicability is promising.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.11
• /
• pp.1655-1661
• /
• 2005

The present studies were designed to provide new information on fatty acid profiles of various muscles and adipose tissues of fattening horses in comparison with beef cattle and pigs. In the first study, the lipids were extracted respectively from subcutaneous, intermuscular adipose tissues, longissimus dorsi and biceps femoris muscles of fattening Breton horses (n = 8) with an average body weight of 1,124 kg. In the second study, the lipids were extracted from subcutaneous, intermuscular adipose tissues and longissimus dorsi muscle of fattening horses (n = 13), Japanese Black beef cattle (n = 5), Holstein steers (n = 5) and fattening pigs (n = 5). The fatty acids in the lipid samples were determined by gas chromatography after methylation by a combined base/acid methylation method. It was found that the lipids from horse subcutaneous and intermuscular adipose tissues contained more (p<0.05) polyunsaturated fatty acids (PUFA) which were mainly composed of linoleic acid (C18:2) and linolenic acid (C18:3) than those in the muscles. The weight percent of conjugated linoleic acids (CLA cis 9, trans 11) in lipids from biceps femoris muscle was 0.22%, which was higher (p<0.05) than that from the other depots. The horse lipids were higher (p<0.05) in PUFA but lower (p<0.05) in SFA and MUFA in comparison with those of the cattle and pigs. The percentage of C18:2 or C18:3 fatty acid in the horse lipids were respectively 2-8 fold or 5-18 fold higher (p<0.05) than those of the cattle and pigs. The percentages of CLA (cis 9, trans 11) in the horse lipids (0.14-0.16%) were very close to those of the pigs (0.18-0.19%) but much lower (p<0.05) than those of the Japanese Black beef cattle (0.55-0.94%) and Holstein steers (0.46-0.71%). The results indicated that the fatty acid profiles of lipids from different muscle and adipose tissues of fattening horses differed significantly. In comparison with that of the beef cattle and pigs, the horse lipids contained more C18:2 and C18:3 but less CLA.

• Tuberculosis and Respiratory Diseases
• /
• v.39 no.2
• /
• pp.141-149
• /
• 1992

In order to establish predicted normal values of volume of isoflow($V_{iso}\dot{V}$), $V_{iso}\dot{V}$ were measured in a total 234 healthy adults, consisting of 78 male nonsmokers, 108 male smokers and 48 female nonsmokers. The volumes of isoflow were determined through analysis of maximal expiratory flow volume curves recorded with a mixture of 80% helium and 20% oxygen(He-$O_2$ gas) following one(1VC) and three vital capacity(3VC) maneuver and with room air. Based upon the correlation of the observed values of the parameters to age and physical characteristics, the following regression formulars for the prediction of the parameters, using age in year(A) as a variable, were obtained. 1VC method ($V_{iso}\dot{V}_1$) Male smoker : 0.614A+2.347 Male nonsmoker : 0.370A-2.792 Female nonsmoker : 0.588A-2.459 3VC method ($V_{iso}\dot{V}_3$) Male smoker : 0.467A+1.696 Male nonsmoker : 0.288A-1.538 Female nonsmoker : 0.367A-0.114.

• Tuberculosis and Respiratory Diseases
• /
• v.51 no.2
• /
• pp.155-160
• /
• 2001

Cryoglobulinemia is the presence of globulins in the serum that precipitate on exposure to cold temperatures(cryoglobulins). Pulmonary complications of cryoglobulinemia include interstial infiltration, impaired gas exchange, small airway disease and pleurisy. Only one other acute respiratory distress syndrome(ARDS) case has been described in patients with cryoglobulinemia. A 55-years old man was admitted with dyspnea. He had been diagnosed as being a hepatitis B virus antigen carrier 15 years ago. On the first admission, chest radiography showed a bilateral pleural effusion and a patchy infiltration on both lungs. On protein- and immuno-electrophoresis, cryoglobulinemia was confirmed. The patient was treated with corticosteroid and plasmapheresis. Forty-five days after the diagnosis, the patient complained of progressive dyspnea and showed a diffuse bilateral pulmonary infiltration on chest radiography. Despite intensive care with mechanical ventilation, the patient died as consequence of hypoxemia and multiple systemic organ failure. On a pathologic examination of the postmortem lung biopsy, multiple necrotizing vasculitis and increased infiltration of the lymphocytes and monocytes were observed. In conclusion, ARDS developed as a result of pulmonary hemorrhage due to cryoglobulinemia-associated vasculitis.

• Journal of Korean Society for Geospatial Information Science
• /
• v.6 no.2 s.12
• /
• pp.69-79
• /
• 1998

It is one of the most crutial thing to secure efficient infrastructure of social infrastructure Including rna drinking water, sewer, gas, and electricity, etc. in modern society. Among them, the sourer system need to be properly maintained so as to sustain water quality over the large watershed thereby to provide reasonable level of living environment A few municipalities and private firms have so in been using sewer management system for assessing existing sewer network and auxiliary facilities. Such existing system can only provide functions to manage the sewer pipe itself and they can not fully estimate the amount of sewage water over the pipe through 4he network analysis due to the deficiency of the system Such a limited sewer network analysis function can only analyze the whole network under the assumption of uniformity. The results from such a process can not be fully implemented in the field. Therefore, this study emphasized the development of a sewer management system which can provide practical values from network analysts considering areal peculiarities using a zoning map utilizing a GIS. The system can support analyzing scenarios due to the changes of sewer amounts from the changes of population densities and rainfall amounts not to mention of calculating sewer amount for individual sewer pipes. furthermore, the system can support the decision making for better designing sewer facilities from the expansion of metropolitan areas and constructing satellite cities. Eventually, it will contribute to enhance the effectiveness of sewer-related works and services for residents as well as supporting a decision making for minor and major trouble-shootings.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.1
• /
• pp.119-125
• /
• 2006

The present study including two experiments was designed to determine the effect of media containing different rare earth elements (REE) on proliferation and fatty acids accumulation in 3T3-L1 cell cultures. In Experiment 1, 3T3-L1 preadipocytes in 96-well plates ($1.5{\times}10^4cells/ml$) were cultured with Dulbecco's modified Eagle's medium (DMEM) containing 10% fetal bovine serum (FBS) for 24 h. Then the media were changed to the following 10 different media for 48 h: DMEM containing 10% FBS for the control; the above media containing $5{\mu}M$, $10{\mu}M$ or $15{\mu}M$ of $LaCl_3$, $CeCl_3$ or the mixture of these REE chlorides. The proliferation rate of the cells was measured and compared by a non-isotope method-XTT method. In Experiment 2 the cells in 24-well plates ($1.5{\times}10^4cells/ml$) were cultured in DMEM containing 10% FBS for 7 days until confluent and then were changed to above DMEM containing dexamethasone, methyl-isobutylxanthine and insulin (DMI) for two days. Afterwards the media were changed to the 10 different media with REE supplements as in Experiment 1 and cultured for 6 days. The cells were then harvested for fatty acids analysis by gas chromatography. It was found that supplementation of La (5, 10 and $15{\mu}M$), Ce ($5{\mu}M$ and $15{\mu}M$) and the mixture REE (5, 10 and $15{\mu}M$) stimulated (p<0.05) the proliferation of 3T3-L1 preadipocytes (Experiment 1). In the differentiating 3T3-L1 cells supplementation of La ($5{\mu}M$ and $10{\mu}M$), Ce ($5{\mu}M$) and the mixture REE ($5{\mu}M$ and $15{\mu}M$) decreased (p<0.05) the concentration of monounsaturated fatty acids (MUFA) per $10^5cells$, while the supplementation of La ($5{\mu}M$), Ce ($5{\mu}M$) and the mixture REE ($15{\mu}M$) increased (p<0.05) the ratio of saturated fatty acids (SFA) to MUFA. These results indicate that the supplementation of REE to the media may affect proliferation, differentiation and lipogenesis rates of 3T3-L1 cells. However, the effect may depend upon the level or type of REE applied.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.221-221
• /
• 2014

The present work proposes an improved numerical simulator for design and modification of large area capacitively coupled plasma (CCP) processing chamber. CCP, as notoriously well-known, demands the tremendously huge computational cost for carrying out transient analyses in realistic multi-dimensional models, because electron dissociations take place in a much smaller time scale (${\Delta}t{\approx}10-8{\sim}10-10$) than time scale of those happened between neutrals (${\Delta}t{\approx}10-1{\sim}10-3$), due to the rf drive frequencies of external electric field. And also, for spatial discretization of electron flux (Je), exponential scheme such as Scharfetter-Gummel method needs to be used in order to alleviate the numerical stiffness and resolve exponential change of spatial distribution of electron temperature (Te) and electron number density (Ne) in the vicinity of electrodes. Due to such computational intractability, it is prohibited to simulate CCP deposition in a three-dimension within acceptable calculation runtimes (<24 h). Under the situation where process conditions require thickness non-uniformity below 5%, however, detailed flow features of reactive gases induced from three-dimensional geometric effects such as gas distribution through the perforated plates (showerhead) should be considered. Without considering plasma chemistry, we therefore simulated flow, temperature and species fields in three-dimensional geometry first, and then, based on that data, boundary conditions of two-dimensional plasma discharge model are set. In the particular case of SiH4-NH3-N2-He CCP discharge to produce deposition of SiNxHy thin film, a cylindrical showerhead electrode reactor was studied by numerical modeling of mass, momentum and energy transports for charged particles in an axi-symmetric geometry. By solving transport equations of electron and radicals simultaneously, we observed that the way how source gases are consumed in the non-isothermal flow field and such consequences on active species production were outlined as playing the leading parts in the processes. As an example of application of the model for the prediction of the deposited thickness uniformity in a 300 mm wafer plasma processing chamber, the results were compared with the experimentally measured deposition profiles along the radius of the wafer varying inter-electrode gap. The simulation results were in good agreement with experimental data.