• Journal of Advanced Marine Engineering and Technology
• /
• 제26권6호
• /
• pp.653-660
• /
• 2002

In this study, the toughness was evaluated by using the instrumented Charpy impact testing procedures for A15083-O aluminum alloy used in the LNG carrying and storing tank. The specimens were GMAW welded with four different mixing shield gas ratios (Ar100%+He0%, Ar67%+He33%, Ar50%+He50%, and Ar33%+He67%), and tested at four different temperatures(+25, -30, -85, and $-196^{\circ}C$) in order to investigate the influence of the mixing shield gas ratio and the low temperature. The specimens were divided into base metal, weld metal, fusion line, and HAZ specimen according to the worked notch position. From experiment, the maximum load increased a little up to -$85^{\circ}C$ , and the maximum load and maximum displacement were shown the highest and the lowest at -$196^{\circ}C$ than the other test temperatures. The absorption energy of weld metal notched specimens was not nearly depends on test temperature and mixing shield gas ratio because the casting structure was formed in weld metal zone. In the other hand, the other specimens were shown that the lower temperature, the higher absorption energy slightly up to $-85^{\circ}C$ but the energy was decreased so mush at $-196^{\circ}C$.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1999년도 학술대회논문집-국제 전기방전 및 플라즈마 심포지엄 Proceedings of 1999 KIIEE Annual Conference-International Symposium of Electrical Discharge and Plasma
• /
• pp.67-70
• /
• 1999

This paper describes preliminary discussions on manufacture of a He-Ne laser and investigation of output characteristics. The He-Ne laser which is to be manufactured is what is the most common wavelength λ=632.8[nm] transition in the red portion of the spectrum. The output characteristics as various parameters, such as gas mixture ratio, gas pressure, discharge current, resonator, resonator length, and the efficiency characteristics as a input power will be investigated.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권9호
• /
• pp.436-442
• /
• 2002

Recently color AC PDP(plasma display panel) technology is rapidly improved. However, the luminous efficiency improvement is a key issue for making plasma display into a large-area flat display. In this paper, we suggest a new concentration of Xe in He-Ne-Xe gas mixture in order to achieve a high luminous efficiency of color AC PDPs. We calculated the densities of 25 species as a function of the time zero dimensional simulation using CVODE solver and we compared the results of zero dimensional simulation with a measurement of photo wave brightness and luminous efficiency, in order to find the optimum mixing condition of He-Ne-Xe gas in color plasma display panel. We obtained a high discharge speed under Xe mixing ratio of 1% by simulation and confirmed that through measuring photo wave.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.522-524
• /
• 2004

The improvement of luminance and luminous efficiency is the one of the most important part in AC-PDPs. To achieve high luminance and luminous efficiency, high VUV emission efficiency is needed. We measured the emission spectra of vacuum ultraviolet(VUV) rays in surface discharge AC-PDP with binary and ternary gas mixtures of Ne-Xe and He-Ne-Xe. The influence of He-Ne-Xe gas-mixture ratio on excited $Xe^{\ast}$ resonant atoms and $Xe_2$$^{\ast}$ dimers has been investigated. It is found that luminous efficiency of ternary gas mixture, He-Ne-Xe, is shown to be much higher than that of binary gas mixture of Ne-Xe.

• Journal of Welding and Joining
• /
• 제32권1호
• /
• pp.87-92
• /
• 2014

Recently, use of thick Al 5083 plate has increased in production of LNG storage tank. In general, multi-pass welding has been used to achieve sufficient penetration in thick plate welding. High current welding which enables high deposition and deep penetration is preferred in thick plate welding because the increase of number of pass increases manufacturing cost and formation of weld defect. In this study, welding characteristics according to various Ar/He shielding gas composition was investigated in high current MIG welding. The bead-on-plate welding and V groove welding were conducted on Al 5083 alloy with a thickness of .25 mm. The effect of shielding gas composition on bead shape was evaluated and proper shielding gas composition was proposed. Also arc stability was examined under selected shielding gas composition. One side-one pass welding experiments were conducted for V groove specimen with a thickness of 25 mm. Mechanical properties and hardness profiles were measured for the V groove specimens.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.23-26
• /
• 2002

Two modes of shock waves propagating in He II (superfluid helium), this is a compression and a thermal shock waves, were studied experimentally by using superconductive temperature sensors, piezo pressure transducers and Schlieren visualization method with an ultra-high-speed video camera (40,500 pictures/sec). The shock waves are induced by a gas dynamic shock wave impingement upon a He II free surface. It is found that the shock Mach number of a transmitted compression shock wave is up to 1.16, and the shock Mach number of a thermal shock wave coincides well with the second sound velocity under each compressed He II state condition. The temperature rise ratio of an induced thermal shock wave to that of an incident gas dynamic shock wave was found to be very small, as small as 0.003 at 1.80K.

• 전기학회논문지P
• /
• 제63권1호
• /
• pp.19-23
• /
• 2014

This paper describes the electron transport characteristics in $SF_6$-He gas calculated E/N values 0.1~700[Td] by the Monte Carlo simulation and Boltzmann equation method using a set of electron collision cross sections determined by the authors and the values of electron swarm parameters obtained by TOF method. This study gained the values of the electron swarm parameters such as the electron drift velocity, the electron ionization or attachment coefficients, longitudinal and transverse diffusion coefficients for $SF_6$-He gas at a range of E/N. A set of electron collision cross section has been assembled and used in Monte Carlo simulation to predict values of swarm parameters. The result of Boltzmann equation and Monte Carlo Simulation has been compared with experimental data by Ohmori, Lucas and Carter. The swarm parameter from the swarm study are expected to sever as a critical test of current theories of low energy scattering by atoms and molecules.

• 한국전기전자재료학회논문지
• /
• 제13권4호
• /
• pp.359-364
• /
• 2000

The paper describes the electron transport characteristics in SP$_{6}$+He gas calculated E/N values 0.1~700[Td] by the Monte Carlos simulation and Boltzmann equation method using a set of electron collision cross sections determined by the authors and the values of electron swarm parameters obtained by TOF method. This study gained the values of the electron swarm parameters such as the electron drift velocity the electron ionization or attachment coefficients longitudinal and transverse diffusion coefficients for SF$_{6}$+He gas at a range of E/N.E/N.

• 생명과학회지
• /
• 제9권6호
• /
• pp.677-683
• /
• 1999

Gamdutang aqua-acupuncture solution (GAS), Gamdutang water-extracted solution (GWS) and Dae-Gamdutang aqua-acupuncture solution (DGAS) were prepared and tested for antitumor activities. It was shown to possess considerable toxicity toward various tumor cell lines. Concentration of 5 $\times$ and 10$\times$ of GAS resulted in more than 70% inhibition of growth in Ehrlich ascites tumor cells (EATC), Hepa1c1c7 and A549. GAS at concentrations of 5$\times$ and 10$\times$ revealed more than 60% inhibition in HeLa. GWS showed more than 50% inhibition of growth with EATC and HeLa at concentrations of 5$\times$ and 10$\times$, respectively. Toxicity assay with GWS in Hepa1c1c7 and A549 revealed that more than 80% inhibition of growth at the concentration of 5$\times$ and 10$\times$. In morphological study, the number of cells were decreased, and the shape of cells was round-form in EATC, Hepa1c1c7, A549, HeLa with GAS.

• 지질공학
• /
• 제22권1호
• /
• pp.123-134
• /
• 2012

본 연구에서는 경북 청송지역 달기탄산약수를 대상으로 수리화학적 특성을 밝히고, ${\delta}^{13}C_{DIC}$ 분석과 영족기체 동위원소 ($^3He/^4He$, $^{20}Ne/^{22}Ne$)의 존재비를 분석하여 영족기체와 연계한 탄산가스의 기원을 밝히고자 하였다. 달기 탄산약수의 수리화학적 특성은 pH 5.93~6.33 범위로 약산성의 특성을 보이고, 전기전도도 값은 1,950~$3,030{\mu}S/cm$ 범위로 높은 값을 보인다. 탄산약수의 수리화학적 유형은 Ca(Mg)-$HCO_3$ 형에 속하며, Na의 함량도 매우 높은 값을 보인다. 모든 약수는 Fe, Mn의 함량이 음용수 수질기준치를 초과하고, 일부에서는 As의 함량이 높은 값을 보인다. 탄산약수의 주요 이온성분 함량은 1999년에 보고된 함량보다 전반적으로 약간 높은 값을 보인다. 달기 탄산약수의 ${\delta}^{13}C_{DIC}$값은 -6.70~-4.47‰범위를 보여 $CO_2$의 기원은 맨틀과 마그마와 같은 지하 심부기원임을 지시한다. 달기탄산약수는 $^3He/^4He$비가 $7.67{\times}10^{-6}{\sim}8.38{\times}10^{-6}$ 범위로 높은 값을 보이고, $^4He/^{20}Ne$비는 21.32~725.7 범위를 보여, 대기-맨틀-지각 기원의 3성분계상에서 헬륨가스의 기원이 맨틀과 같은 심부기원(혹은 화산성기원)의 영역에 도시된다. 이와 같은 연구결과는 과거 달기약수내 $CO_2$가 무기기원이라는 해석과는 달리 보다 분명한 심부기원의 $CO_2$공급원을 제시하는데 의미가 있다.