• Journal of the Ergonomics Society of Korea
• /
• v.24 no.1
• /
• pp.9-17
• /
• 2005

81.1% of traffic accidents is attributed to the drivers. In this regard, D/E model is a practical and effective method in terms of the cost and time in evaluating the road hazardousness. To examine the validity of the threshold values by the levels of demand We selected 10 subjects and collected their physiological signals while they were driving on Honam Highway (Jeonju ${\leftrighttarro}$ Hoideog section). Based on the collected data, the hazardous road condition was evaluated using the new threshold values of the effort level determined by cluster analysis. In applying the D/E model, a decision method based on the demand level was suggested, using a traffic accident prediction model. Additionally, the limit value of the effort level was determined using the drivers' physiological signal data collected at the highway. A comparison analysis of the two D/E models revealed no significant difference: The existing method and the clustering method determined 9 and 7 hazardous road zones, respectively, while actual traffic accidents were reported in 6 and 4 zones, respectively among the predicted road hazardous zones. However, the latter method suggested a more scientific and rational basis in determining the limit value of the Effort level. In conclusion, although D/E model has a great merit as a pioneering method to reflect human factors in evaluating the road hazardousness, it is believed that this method could be improved by a more dynamic method that considers the traffic conditions and the individual physiological signal of the drivers simultaneously in determining a better limit.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.1
• /
• pp.128-134
• /
• 2012

This paper gives an overview of the requirements for electrical equipment in potentially explosive atmospheres and describes how these are applied to electrical machines and drives in hazardous areas. The method by which equipment can be shown to be safe in a whole range of gases, by testing in a single test gas, is covered. It is shown how the more recently introduced methods of protection for hazardous areas, increased safety and nonsparking, are ideally suited to AC machines and drives. A novel method of measuring the fullload temperature rise of electrical machines for hazardous, and other areas, without the need to connect a mechanical load to the machine's drive shaft is explained.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.1
• /
• pp.35-42
• /
• 2010

Due to the industrialization and urbanization, the transport of hazardous materials increases, which rises possibilities in occurring prospective accidents in terms of hazardous material transport as well. This study applied the model developed from the previous research to analyze the scale of damage areas from the accidents related to hazardous material accidents, as well as suggested a method to measure automatically the scale of accident including casualties and environmental damage based on the guideline which suggests the quantities of hazardous materials exposed from an accident and was defined in the study of standardization for hazardous material classification. A buffering analysis technique of Geographic Information System (GIS) was applied for that. To apply the model which evaluates the scale of population and exposure to environment on each link, rail network, zones, rail accident data, rail freight trips, and locations of rivers etc were complied as a database for GIS analysis. In conclusion, a method to measure damage areas by the types of hazardous materials was introduced using a Clip and a Special Join technique for overlay analysis.

• Journal of the Korean Society of Safety
• /
• v.35 no.2
• /
• pp.111-117
• /
• 2020

When KS C IEC 60069-10-1(2015) standard is applied to estimate a hazardous area, the chart showing the relationship between a hazardous area distance and release characteristic is used as a guide to determine the extent of hazardous zones for various forms of release. Three release characteristic lines based on the three types of release as an unimpeded jet release with high velocity, a diffusive jet release with low velocity, and a release of heavy gases or vapours that spread along horizontal surfaces are given. As these characteristic lines have the low limit threshold, it is difficult to estimate the hazardous area distance when the value of release characteristic is under the low limit threshold. And KS C IEC 60079-10-1(2015) standard shows the concept for a zone of Negligible extent(NE) which can be considered as non hazardous area, but it is also difficult to apply the concept of a Negligible extent. The purpose of this paper is to suggest the guideline for the release characteristic to decide a hazardous area distance and the Negligible extent(NE) being considered as non-hazardous area when deciding a hazardous area distances by the KS C IEC 60079-10-1 standard.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1769-1778
• /
• 2009

Due to the industrialization and urbanization, the transport of hazardous materials increases, which rises possibilities in occurring prospective accidents in terms of hazardous material transport as well. This study applied the model developed from the previous research to analyze the scale of damage areas from the accidents related to hazardous material accidents, as well as suggested a method to measure automatically the scale of accident including casualties and environmental damage based on the guideline which suggests the quantities of hazardous materials exposed from an accident and was defined in the study of standardization for hazardous material classification. A buffering analysis technique of Geographic Information System (GIS) was applied for that. To apply the model which evaluates the scale of population and exposure to environment on each link, rail network, zones, rail accident data, rail freight trips, and locations of rivers etc were complied as a database for GIS analysis. In conclusion, a method to measure damage areas by the types of hazardous materials was introduced using a Clip and a Special Join technique for overlay analysis.

• Journal of the Korean Society of Safety
• /
• v.26 no.3
• /
• pp.63-68
• /
• 2011

Access-control of hazard zone in a steel manufacturing industry is studied in terms of safety management. Based on the results of risk evaluation for hazard zone, three risk zones with low, middle and high level are categorized. These zones have different color door and locking shape depending on their risk levels. At the high level, red door and key-based locking system are employed to accessed-controled path. Furthermore, tagout, lockout, interlock system for emergency stop, warning and flashing are also introduced. New standardized procedure of access-control for various hazard zones, which could help to greatly contribute to the prevention of accidents in advance, is proposed considering the risk level and the condition of given hazard zones. The standardized procedure of access-management suggested in this study will take an effective role as one of safety guide lines for hazardous workshop of manufacturing industries.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.4
• /
• pp.533-546
• /
• 2021

Large earthquakes with (M_W > ~ 6) result in ground shaking, surface ruptures, and permanent deformation with displacement. The earthquakes would damage important facilities and infrastructure such as large industrial establishments, nuclear power plants, and waste disposal sites. In particular, earthquake ruptures associated with large earthquakes can affect geological and engineered barriers such as deep geological repositories that are used for storing hazardous radioactive wastes. Earthquake-driven faults and surface ruptures exhibit various fault zone structural characteristics such as direction of earthquake propagation and rupture and asymmetric displacement patterns. Therefore, estimating the respect distances and hazardous areas has been challenging. We propose that considering multiple parameters, such as fault types, distribution, scale, activity, linkage patterns, damage zones, and respect distances, enable accurate identification of the sites for deep geological repositories and important facilities. This information would enable earthquake hazard assessment and lower earthquake-resulted hazards in potential earthquake-prone areas.

• Journal of the Korean Society of Safety
• /
• v.33 no.4
• /
• pp.21-29
• /
• 2018

In many companies handling flammable liquids, explosion-proof electrical equipment have been installed according to the Korean Industrial Standards (KS C IEC 60079-10-1). In these standards, hazardous area for explosive gas atmospheres has to be classified by the evaluation of the evaporation rate of flammable liquid leakage. The evaporation rate is an important factor to determine the zones classification and hazardous area distance. However, there is no systematic method or rule for the estimation of evaporation rate in these standards and the first principle equations of a evaporation rate are very difficult. Thus, it is really hard for industrial workplaces to employ these equations. Thus, this problem can trigger inaccurate results for evaluating evaporation range. In this study, empirical models for estimating an evaporation rate of flammable liquid have been developed to tackle this problem. Throughout the sensitivity analysis of the first principle equations, it can be found that main factors for the evaporation rate are wind speed and temperature and empirical models have to be nonlinear. Polynomial regression is employed to build empirical models. Methanol, benzene, para-xylene and toluene are selected as case studies to verify the accuracy of empirical models.

• Tunnel and Underground Space
• /
• v.18 no.5
• /
• pp.366-374
• /
• 2008

Tunnelling under water table induces many geotechnical problems because of groundwater. In subsea tunneling, reduction of face stability can induce flooding in the vicinity of a fracture zone characterized by high permeability and high water pressure. In this study, the effects of high water pressure on the stability of a tunnel face in a limited zone with high permeability(hazardous zone) are analyzed. On the basis of the 'advance core' concept, the seepage force acting on a hypothetical cylinder ahead of a tunnel face is modeled. This study focuses on the hydraulic behavior of the ground ahead of the tunnel face by three-dimensional steady-state seepage analyses. The impact of the hazardous zone on the seepage force and stability of the tunnel face are simulated and analyzed. In light of the analysis results, it is estimated that the distance from the tunnel face to the exterior boundary limit, which the seepage force significantly affects the stability of the tunnel face, of a hypothetical cylinder is approximately 5 times the tunnel radii. Despite the restrictive assumptions of this study, the results are highly indicative regarding the risks of hazardous zones.

• Journal of the Korea Convergence Society
• /
• v.10 no.10
• /
• pp.107-115
• /
• 2019

Effective construction safety management systems are desperately required for reducing damage caused by increasing safety accidents in construction sites. Safety accidents in construction sites can effectively protect if proactive measures are taken to prevent unauthorized worker access the expected hazardous area. In this study, we have developed a IoT(Internet of Things)-based dangerous zone alarming system for safety management in construction sites, which can be operated at low cost in large-scale sites as well as small and medium-sized construction sites. The development system utilizes a Zigbee-based beacon technology and cellular mobile communication technology to detect when authorized workers, unauthorized field workers or outsiders approaches hazardous zones. If somebody approaches the dangerous zones the system notifies immediately to the safety manager with a danger warning signal. It is expected that this system can effectively prevent safety accidents when applied to construction sites.