• International Journal of Quality Innovation
• /
• v.6 no.1
• /
• pp.58-73
• /
• 2005

The objective of this study is to evaluate the equipment risk before and after SEMI S2-93A implementation, thus providing a guideline for safety improvement. Semiconductor Plant A located in Taiwan's Hsinchu Science Based Industrial Park with 147 manufacturing machines was used for risk assessment. This study was carried out in three steps. First, a preliminary hazard analysis was conducted. A detailed process safety evaluation was conducted (Hazard and Operability Study, HAZOP); and finally, the equipment risk comparison before and after Semiconductor Equipment Manufacturing Instruction (SEMI S2-93A) implementation. The preliminary hazard analysis results showed high risk in 21.77% of the manufacturing machines under risk assessment at Plant A. The largest percentage existed in the Diffusion Department. The machine types specified by the hazardous work site review and inspection according to Article 26 of Labor Inspection Regulation (the machines that use such chemicals as, $SiH_4$, HF, HCL, etc. and that are determined to be highly hazardous through preliminary hazard analysis) were added to the detailed process analysis and evaluation. In the third part of this evaluation, the machines at Plant A used for detailed process safety assessment were divided into two groups based on the manufacturing data before and after 1993. The severity, possibility, and actual accident analysis before and after SEMI S2-93A implementation were compared. The Semiconductor Equipment Manufacturing Instruction (SEMI S2-93A) implementation can reduce the severity and possibility of hazard occurrence.

• Journal of Environmental Science International
• /
• v.29 no.6
• /
• pp.673-682
• /
• 2020

This study investigates the concentration distribution of aldehydes and volatile organic compounds (VOCs) in the archive of the National Library in Korea and evaluates the health risks to workers from hazardous chemicals. Acetaldehyde had the highest concentration among the nine species of aldehydes present in the archive and the concentration of toluene was the highest among the six species of VOCs. Most of the detected substances showed that their indoor concentrations were higher than the outdoor ones, suggesting the possibility of indoor sources of aldehydes and VOCs. The evaluation of health risks for workers based on these measurement results showed that not all substances were hazardous to the human body. However, considering the possibility of the presence of indoor sources and the potential limits of our study owing its short period, it is necessary to conduct long-term studies on the concentration distribution of indoor pollutants in the archive environment.

• Korean Journal of Occupational Health Nursing
• /
• v.17 no.2
• /
• pp.126-137
• /
• 2008

Purpose : The purpose of this study was to investigate the difference in gender related to health status, occupational environment, occupational safety and health and hazardous chemicals use of migrant workers in Korea. Method: The survey was conducted in clinics that provided free healthcare services for migrant workers. Of the 413 respondents, 66.3% were males and 33.7% were females. Result: In the case of male migrant workers, many worker were not fluent in Korean, had illegal status in the country, and had moved jobs frequently. There were many cases in which migrant workers worked in small-scale enterprises and worked long hours. Job stress score was high for many workers and they dealt with heavy materials and risky machines. Many workers had not received proper occupational health and safety education and those that were previously injured had repeated injuries. Among the female migrant workers, many worker received low salary and shift work was common. Many worker complained of gastrointestinal and musculoskeletal illnesses and treated toxic substances. Conclusion: As a result, it will be necessary to focus on the strategies for decreasing occupational injuries from physical risk factors for males and from chemical risk factors for female migrant workers.

• Journal of Environmental Impact Assessment
• /
• v.19 no.5
• /
• pp.453-464
• /
• 2010

We evaluated the status and problems of golf course developments in the southern coast of Korea. It's adjacent waters supports nursery and fishing grounds for commercially-important fisheries species, and various sites are designated and protected as marine protection area(MPA), fisheries reserve, or clean area(blue belt) for producing shellfish. We proposed key assessment items for environmental impact assessment(EIA) and checklists in selecting golf course locations. For the protected areas, we suggest that it is essential to limit golf course establishment while setting a minimal distance from the coast to secure a buffer zone for mitigating the environmental impacts. To efficiently utilize existing regional coastal management plans, it is necessary to diagnose how a golf course development will potentially modify geomorphology and scenery, amplify pollutant loads from non-point sources, and disrupt the functions of coastal ecosystem. Especially, continued monitoring and assesssing input loads of hazardous materials originating from agricultural chemicals should be obligatory. Finally, measures for improving the QA/QC analysis were discussed to enhance reliability of environmental data with respect to golf courses and adjacent coastal waters.

• Clean Technology
• /
• v.4 no.1
• /
• pp.6-23
• /
• 1998

Recently, semiconductor industry has grown rapidly because of the large demand for electronic devices and equipment. The semiconductor industries have also played an important role on the economic growth in Korea. As the environmental regulations become strict, the proper environmental management and the well-developed waste minimization technologies in semiconductor industries are two of urgent problems to be solved. The semiconductor manufacturing process consists of a series of continuous chemical processes, such as cleaning, oxidation, diffusion, photolithography, etching and film deposition. During the processes, various environmentally hazardous wastes are produced. The wastes may be classified as wastewater, gaseous pollutants, and solid wastes. For waste minimization, the substitution of raw materials and process optimization techniques are used, while the selective destruction technologies of toxic chemicals contained in the wastes have been reported. Also, new technologies have been developed for source reduction and waste reduction, such as reduction of toxic chemical use and substitution of hazardous liquids with gaseous reactants or solvent.

• Journal of the Korean Institute of Gas
• /
• v.24 no.2
• /
• pp.29-35
• /
• 2020

The Chemical Control Act has revised in 2015 to promote chemical safety, particularly enhancing the standards for the installation and management of hazardous chemical handling facilities. However, in some existing facilities, it was difficult to comply with some facility standards because of lack of land, safety accident possibility during rebuilding. In this study, we attempted to provide a more rational approach of dike standard which was the highest(2017: 117, 2018: 83) complaint for two years(2017~2018, 1,087) by prior study, FLACS simulation, analyze safety management standard and conduct a survey. Therefore, considering the purpose of installing the discharge wall only at existing facilities in operation, additional sensors that can detect chemical leakage and leakage were recognized as an additional alternative to installing and operating closed circuit television (CCTV). This will help the safety and cost aspects of small or medium-sized businesses or small and medium-sized enterprises that cannot secure legal grounds or fail to enforce legal regulations due to economic problems such as construction costs.

• Journal of Environmental Health Sciences
• /
• v.36 no.5
• /
• pp.418-434
• /
• 2010

As concerns regarding water pollution grow, the need increases for a fast and accurate assessment of ecological risk. In this context, many studies have been conducted to identify biomarkers which can sensitively indicate exposure to and effects of various contaminants in a water environment. However, the utility of most such biomarkers in the real water environment is not yet validated. In this paper, we conducted a thorough review of publications that were related to developing or evaluating molecular and biochemical biomarkers of freshwater fish in ecological risk assessment, and evaluated whether these biomarkers of interest could link to the effects on higher biological levels, such as histopathology and above. Biomarkers of interest included those associated with metabolism, oxidative stress, reproduction and endocrine disruption, genotoxicity, and defense against heavy metal exposure. We found that, when used alone, most molecular and biochemical biomarkers are not sufficient to understand the effects of toxic substances in higher biological levels, due to defense or acclimation mechanisms of organisms. Moreover, some biomarkers respond not only to hazardous substances but also to the changes in water quality and disease outbreak. Molecular and biochemical biomarkers may be most useful in understanding the potential biological effects of toxic compounds when used in parallel with relevant endpoints of higher biological levels.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.3
• /
• pp.181-185
• /
• 2020

Hazardous and noxious substance (HNS) detection sensors were fabricated using multi-walled carbon nanotubes (MWCNTs) and various binder materials for ion batteries. To obtain uniformly printed films, the printing precision according to the substrate cleaning method was monitored, and the printing paste mixing ratio was investigated. Binders were prepared using styrene butadiene rubber + carboxymethyl cellulose (SBR+CMC), polyvinylidene fluoride + n-methyl-2-pyrrolidene (PVDF+NMP), and mixed with MWCNTs. The surface morphology of the printed films was examined using an optical microscope and a scanning electron microscope, and their electrical properties are investigated using an I-V sourcemeter. Finally, sensing properties of MWCNT printed films were measured according to changes in the concentration of the chemical under the various applied voltages. In conclusion, the MWCNT printed films made of (SBR+CMC) were found to be feasible for application to the detection of hazardous and noxious chemicals spilled in seawater.

• Journal of the Korean Institute of Gas
• /
• v.27 no.1
• /
• pp.63-69
• /
• 2023

Although Korea is the world's No. 1 semiconductor producing country, most studies are conducted with risk assessment for simple material risks due to the closedness of the site for industrial protection. In terms of industrial safety, a monitoring system such as a gas detector to determine the leakage of hazardous substances has been established, but research on effectively discharging harmful gastritis substances in case of leakage has only recently begun. Semiconductor manufacturing facilities (gas boxes) where a large amount of flammable materials are handled are currently being safety managed by using a gas detector and blocking the air inlet. It is difficult to dilute in a short time in case of leakage of flammable substances. Therefore, in this study, based on various criteria, the size of the duct according to the size of the gas box is determined and the appropriate size of the air inlet is studied to minimize the exhaust performance requirement without exposing hazardous chemicals to the outside in the event of a flammable leak. We want to do an optimal exhaust design.

• Journal of Environmental Health Sciences
• /
• v.50 no.2
• /
• pp.138-145
• /
• 2024

Background: Appropriateness issues have emerged regarding the non-application of hazardous substance safety standards for items classified as 'other textile products'. Objectives: Testing for formaldehyde (HCHO) and risk assessment were conducted on 'other textiles products' to provide reference data for promoting product safety policies. Methods: Testing was conducted on five items (102 products) classified as 'other textile products' according to relevant standards (textile products safety standards), and the risk of each product was assessed using the evaluation methodologies of the European Centre for Ecotoxicology and Toxicology of Chemicals (ECETOC) and European Chemical Agency (ECHA). Results: Out of the 102 products tested, HCHO was detected above the quantification limit in five. Based on these results, the screening risk assessment indicated that three products exceeded the criteria. Upon reassessing the emission and transfer rates of products exceeding the criteria, it was confirmed that there were no instances of exceeding the criteria. Conclusions: Risk assessment results can be used as supporting data for non-application of hazardous substance standards. However, it is deemed necessary to transition towards a management approach based on risks in order to addressing emerging trends such as convergence/new products.