• Journal of the Korea Safety Management & Science
• /
• v.8 no.3
• /
• pp.51-66
• /
• 2006

This study was attempted to analyze risk factors and suggest accident prevention in live line works for power transmission lines to be developed and applied in Korea. Safety problem cannot but occur at development of live line works and application to the field. With respect to this, problems likely to occur in the field among works adopting methods of works including live line works for power transmission lines were investigated and analyzed through documentary survey and risk assessment method. The results are summarized as follows. A risk assessment method model was suggested. This method enables scientific and systematic development of safety control. That is, the owner may autonomously induce safety control and build risk assessment database by work process to use them as best training data for workers. Also, in the field, it may induce all workers to participate in safety program and secure safety by making workers seek for safety working method under smooth flow from looking at risk factors to accident prevention activities. It is deemed that this humble study will prevent both accident and injury likely to occur in live line works for power transmission lines.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.1
• /
• pp.117-125
• /
• 2011

While human error happens repeatedly in the semiconductor industry in Korea, which has brought a tremendous loss from manpower, welfare etc., there are limitations to human error prevention activities. When a semiconductor company introduces new machines and facilities from Japan or Germany, the companies often do not consider human factors in the design. Also, semiconductor companies are so occupied with promoting increased productivity, their attention to human errors has been pushed aside. Negative aspects of technical exchange associated with safety management are one aspect of the industry's nature. A semiconductor company recently began acknowledging on the back of TQM(Total Quality Management) that human error has a decisive effect on the safety. There are a number of uncontrollable and hard to handle event sets because the nature of these events with a human error may often be threatened or very intensive. It is strongly required that systemic studies should be performed to grasp the whole picture of a current situation for hazard factors. This study aims to examine the human error approach through the case of human error prevention field activities in a semiconductor industry compared with the activities and experience in nuclear power plants.

• Journal of the Korean Society of Safety
• /
• v.29 no.4
• /
• pp.184-190
• /
• 2014

Decommissioning process of nuclear facilities consist of a sequence of problem solving activities, because there may exist not only working environments contaminated by radiological exposure but also industrial hazards such as fire, explosions, toxic materials, and electrical and physical hazards. Therefore, not a few countries in the world have been trying to develop appropriate counter techniques in order to guarantee safety and efficiency of the process. In spite of that, there still exists neither domestic nor international standard. Unfortunately, however, there are few workers who experienced decommissioning operations a lot in the past. As a solution, it is quite necessary to utilize experts' opinions for risk assessment in decommissioning process. As for an individual hazard factor, risk assessment techniques are getting known to industrial workers with advance of safety technology, but the way how to integrate those results is not yet. This paper aimed to find out an appropriate technique to integrate individual risk assessment results from the viewpoint of experts. Thus, on one hand the whole risk assessment activity for decommissioning operations was modeled as a sequence of individual risk assessment steps which can be classified into two activities, decontamination and dismantling, and on the other, a risk assessment structure was introduced. The whole model was inferred with Fuzzy theory and techniques, and a numerical example was appended for comprehension.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.899-902
• /
• 2005

Pipeline hazard due to branch instructions is the major factor of the degradation on the performance of microprocessors. Branch target buffer predicts whether a branch will be taken or not and supplies the address of the next instruction on the basis of that prediction. If the branch target buffer predicts correctly, the instruction flow will not be stalled. This leads to the better performance of microprocessor. In this paper, the architecture of a tag memory that branch target buffer and TLB can share is presented. Because the two tag memories used for branch target buffer and TLB each is replaced by single shared tag memory, we can expect the smaller ship size and the faster prediction. This hared tag architecture is more advantageous for the microprocessors that uses more bits of address and exploits much more instruction level parallelism.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.79-82
• /
• 2008

The elastic critical moment of I-beams subjected to moment is directly affected by the following factors; loading type; loading position with respect to the mid-height of the cross section; end restraint conditions. Most design specifications usually provide buckling solutions derived for uniform moment loading condition and account for variable moment along the unbraced length with a moment gradient correction factor applied to these solutions. In order for the method in the SSRC Guide to be applicable for singly symmetric I-beams, improved moment gradient correction factors were proposed in this study. Finite element buckling analyses of singly symmetric I-beams subjected to transverse loading applied at different heights with respect to the mid-height of the cross section were conducted. Transverse loads consisting of a mid-span point load and a uniformly distributed load were considered in the investigation.

• Journal of the Korean Society of Safety
• /
• v.34 no.6
• /
• pp.38-49
• /
• 2019

While the overall industrial accident rate has been decreased, but those of the construction industry has not been. For safety management during the planning/design phase, which accounts for 45% of the cause of accident at the construction site, Design For Safety (DFS) was established to minimize a hazard and risk in 2016. Currently, DFS system has difficulty settling down in Korea due to the several reasons. So, this paper aims to propose to the Key Success Factor (KSF) and related action plan to improve DFS system. This study was conducted by following 2 steps: i) identification of problems on current DFS, and ii) proposal of KSF and following action plan for DFS. The DFS in Korea was compared with UK, Singapore, Australia, and US on 7 criteria (application target, execution period, change of design, collaboration among participants, expert participants, alternative review and decision support system). DFS was compared with other countries's system based on the identical criteria and the corresponding improvement measures were also proposed. The results of this study can be utilized to improve DFS system in various aspects.

• Journal of Advanced Navigation Technology
• /
• v.10 no.3
• /
• pp.226-234
• /
• 2006

Aids to Navigation is one of the most important facility for safety at sea. However, in terms of position there always exists discrepancy in inventory by media and/or organizational body who maintains the facility which may result in incredibility for navigator's position fixing or hazard avoidance. This paper suggests two major factors as the causes of the position error when they design, install and survey the aids to navigation. One is the function of direction of tide and water depth which makes swinging circle. The other is a variable value by time resulting from multiple coordination of satellites in contact. This paper aims to minimize inaccuracy by verifying its reason through numerical analysis over inherent position error.

• Safety and Health at Work
• /
• v.6 no.4
• /
• pp.279-288
• /
• 2015

Background: In this study, the measurement of job stress of electric overhead traveling crane operators and quantification of the effects of operator and workplace characteristics on job stress were assessed. Methods: Job stress was measured on five subscales: employee empowerment, role overload, role ambiguity, rule violation, and job hazard. The characteristics of the operators that were studied were age, experience, body weight, and body height. The workplace characteristics considered were hours of exposure, cabin type, cabin feature, and crane height. The proposed methodology included administration of a questionnaire survey to 76 electric overhead traveling crane operators followed by analysis using analysis of variance and a classification and regression tree. Results: The key findings were: (1) the five subscales can be used to measure job stress; (2) employee empowerment was the most significant factor followed by the role overload; (3) workplace characteristics contributed more towards job stress than operator's characteristics; and (4) of the workplace characteristics, crane height was the major contributor. Conclusion: The issues related to crane height and cabin feature can be fixed by providing engineering or foolproof solutions than relying on interventions related to the demographic factors.

• Safety and Health at Work
• /
• v.7 no.2
• /
• pp.130-137
• /
• 2016

At a brewery, the base plate-to-shell weld seam of a $90-m^3$ vertical cylindrical steel tank failed catastrophically. The 4 ton tank "took off" like a rocket leaving its contents behind, and landed on a van, crushing it. The top of the tank reached a height of 30 m. The internal overpressure responsible for the failure was an estimated 60 kPa. A rupture disc rated at < 50 kPa provided overpressure protection and thus prevented the tank from being covered by the European Pressure Equipment Directive. This safeguard failed and it was later discovered that the rupture disc had been installed upside down. The organizational root cause of this incident may be a fundamental lack of appreciation of the hazards of large volumes of low-pressure compressed air or gas. A contributing factor may be that the standard piping and instrumentation diagram (P&ID) symbol for a rupture disc may confuse and lead to incorrect installation. Compressed air systems are ubiquitous. The medium is not toxic or flammable. Such systems however, when operated at "slight overpressure" can store a great deal of energy and thus constitute a hazard that ought to be addressed by safety managers.

• Journal of Gastric Cancer
• /
• v.21 no.3
• /
• pp.236-245
• /
• 2021

Purpose: The numeric N stage has replaced the topographic N stage in the current tumor node metastasis (TNM) staging in gastric carcinoma. However, the usefulness of the topographic N stage in the current TNM staging system is uncertain. We aimed to investigate the prognostic value of the topographic N stage in the current TNM staging system. Materials and Methods: We reviewed the data of 3350 patients with gastric cancer who underwent curative gastrectomy. The anatomic regions of the metastatic lymph nodes (MLNs) were classified into 2 groups: perigastric and extra-perigastric. The prognostic value of the anatomic region was analyzed using a multivariate prognostic model with adjustments for the TNM stage. Results: In patients with lymph node metastasis, extra-perigastric metastasis demonstrated significantly worse survival than perigastric metastasis alone (5-year survival rate, 39.6% vs. 73.1%, respectively, P<0.001). Extra-perigastric metastasis demonstrated significantly worse survival within the same pN stage; the multivariate analysis indicated that extra-perigastric metastasis was an independent poor prognostic factor (hazard ratio=1.33; 95% confidence interval=1.01-1.75). The anatomic region of the MLNs improved the goodness-of-fit (likelihood ratio statistics, 4.57; P=0.033) of the prognostic model using the TNM stage. Conclusions: The anatomic region of MLNs has an independent prognostic value in the numeric N stage in the current TNM staging of gastric carcinoma.