• 제목/요약/키워드: Hatch

검색결과 325건 처리시간 0.029초

후판 편면 맞대기 용접을 위한 1 Pool-twin FCAW의 개발에 관한 연구 (A Study on the Development of 1 Pool-twin FCAW for One-side Butt Welding in Thick Plates)

  • 박금기;최우현;조상명
    • 대한용접접합학회:학술대회논문집
    • /
    • 대한용접접합학회 2004년도 춘계 학술발표대회 개요집
    • /
    • pp.33-35
    • /
    • 2004
  • 선박건조의 탑재공정에 있어서 용접장이 긴 후판 맞대기 용접에는 SAW가 대부분 적용되고 있지만 컨테이너 운반선의 UPPER DECK나 HATCH COAMING TOP PLATE 같은 경우 용접장이 짧고 작업공간이 협소하여 SAW가 적용되지 못하고 있다. (중략)

  • PDF

저급 센서를 고려한 GPS/INS 결합기법 연구 (A Study on GPS/INS Integration Considering Low-Grade Sensors)

  • 박제두;김민우;이제영;김희성;이형근
    • 제어로봇시스템학회논문지
    • /
    • 제19권2호
    • /
    • pp.140-145
    • /
    • 2013
  • This paper proposes an efficient integration method for GPS (Global Positioning System) and INS (Inertial Navigation System). To obtain accuracy and computational conveniency at the same time with low cost global positioning system receivers and micro mechanical inertial sensors, a new mechanization method and a new filter architecture are proposed. The proposed mechanization method simplifies velocity and attitude computation by eliminating the need to compute complex transport rate related to the locally-level frame which continuously changes due to unpredictable vehicle motions. The proposed filter architecture adopts two heterogeneous filters, i.e. position-domain Hatch filter and velocity-aided Kalman filter. Due to distict characteristics of the two filters and the distribution of computation into the two hetegrogeneous filters, it eliminates the cascaded filter problem of the conventional loosly-coupled integration method and mitigates the computational burden of the conventional tightly-coupled integration method. An experiment result with field-collected measurements verifies the feasibility of the proposed method.

Effect of including n-3/n-6 fatty acid feed sources in diet on fertility and hatchability of broiler breeders and post-hatch performance and carcass parameters of progeny

  • Saber, Seyyed Naeim;Kutlu, Hasan Rustu
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제33권2호
    • /
    • pp.305-312
    • /
    • 2020
  • Objective: The present trial was conducted to determine the influence of different dietary fatty acid (omega-3 and omega-6) sources on reproductive performance of female broiler breeders and growth performance and carcass traits of their progeny. Methods: Two hundred and twenty, 25 weeks old Ross-308 male (20) and female (200) broiler breeders were used in the experiment for the period of 6 weeks. All birds were randomly divided into four dietary treatments (containing 2% soybean oil, 2% sunflower oil, 2% flaxseed oil, and 2% fish oil) each with five replicates of one male and ten females. Throughout this experiment hatching performance of broiler breeders, progeny growth performance and carcass parameters were recorded. Results: The results showed that the inclusion of different fatty acid sources in female broiler breeders diet had no significant effects (p>0.05) on number of fertile eggs, post-hatch mortality, and fertility rate. The soybean oil supplemented group had significantly (p<0.05) higher late embryonic mortality compared to other three treatments. Conclusion: It was concluded that inclusion of 2% of different sources of omega-3 and omega-6 fatty acids (especially 2% flax seed oil) in broiler breeders' diet can reduce late embryonic mortality. The other reproductive characteristics of parents and growth and carcass characteristics of progeny remained unaltered by dietary sources of omega-3 and omega-6 fatty acids.

초대형 컨테이너선 구조 설계를 위한 비선형 파랑하중 생성 및 적용 (Generation & Application of Nonlinear Wave Loads for Structural Design of Very Large Containerships)

  • 정병훈;류홍렬;최병기
    • 대한조선학회 특별논문집
    • /
    • 대한조선학회 2005년도 특별논문집
    • /
    • pp.15-21
    • /
    • 2005
  • In this paper, the procedure of generation and application of nonlinear wave loads for structural design of large container carrier was described. Ship motion and wave load was calculated by modified strip method. Pressure acting on wetted hull surface was calculated taking into account of relative hull motion to the wave. Design wave height was determined based on the most sensitive wave length considering rule vertical wave bending moment at head sea or fellowing sea condition. And the enforced heeling angie concept which was introduced by Germanischer Lloyd (GL) classification had been used to simulate high torsional moment in way of fore hold parts similar to actual sea going condition. Using wave load generated from this dynamic load calculation, FE analyses were performed. With this result, yielding, buckling, hatch diagonal deflection and fatigue strength of hatch corners were reviewed based on the requirement of GL classification. The results of FE analysis show good compatibility with GL classification.

  • PDF

Variations of Abundance and Hatch Timing of Dungeness Crab Larvae in Southeastern Alaska: Implications for Climate Effect

  • Park, Won-Gyu;Shirley, Thomas C.
    • Animal cells and systems
    • /
    • 제12권4호
    • /
    • pp.287-295
    • /
    • 2008
  • Variations of larval abundance and hatch timing of Dungeness crabs, Cancer magister Dana 1852, were investigated. Dungeness crab larvae were monthly collected at 16 stations arrayed in four transects, Upper Chatham, Icy Strait, Cross Sound, and Icy Point, in southeastern Alaska from May to September 1997-2004. Larval abundance at all transects was the highest in June except in the Icy Point transect. Larval abundance was the highest in the Icy Strait transect, moderate in the Upper Chatham and Cross Sound transects, and the lowest in the Icy Point transect. Zoeae I(ZI) was predominated in May; thereafter ZI decreased and late zoeal stages occurred. In May and June, small numbers of late stage larvae unusually co-occurred with ZI in three transects. These late stage larvae may have been transported from where hatching occurs earlier. The timing of ZI occurrence varied interannually and was related to degreedays during the egg incubation period of Dungeness crabs: later larval hatching in 1997 and 2002 when temperatures were colder, while earlier larval hatching in 1998 when temperatures were warmer. The distribution patterns of Dungeness crab larvae in southeastern Alaska were markedly different from those reported from other areas of the species distribution ranges: larvae occurring much later in the year, and late stage larvae occurring in inland waters.

남극 세종기지 부근에 출현하는 펭귄 (The Species of Penguins and Penguins Occurring in the Vicinity of King Sejong Station)

  • 장순근
    • Ocean and Polar Research
    • /
    • 제21권2호
    • /
    • pp.137-147
    • /
    • 1999
  • Penguins are one of the key constituent organisms in the Antarctic ecosystem. A total of 18 species of penguins occur only in the southern hemisphere from the Galapagos Archipelago to southern area off Australia and New Zealand, South Africa, South America, and the islands scattered in the Southern Ocean to the coast along the Antarctic Continent. In the Antarctic Treaty area, there are only 5 species of penguins such as Emperor (Aptenodytes forsteri), Gentoo (Pygoscelis papua ellsworthi), Adelie (P. adeliae), Chinstrap (p. antarctica), and Macaroni (Eudyptes chrysolophus) penguins. Two additional species, the King (Aptenodytes patagonicus patagonicus) and Rockhopper (Eudyptes chrysocome) penguins, however, are distributed within the Antarctic Convergence. In the vicinity of king Sejong Station located in King George Island, the South Shetland Islands off the Antarctic Peninsula, 5 species are observed, among which 2 Pygoscelis species such as the Gentoo and Chinstrap penguins hatch their eggs and raise their chicks at the rookery 2km south offing Sejong Station in summer. Adelie penguins hatch their chicks in other place in King George Island. One Emperor penguin roamed on the frozen Maxwell Bay which has been frozen every two or three years with the approximate thickness of 60cm. And one Macaroni penguin also visited the rookery in summer. We should carry out researches on the penguins occurring in the vicinity of King Sejong Station to monitor the environmental changes around King Sejong Station and the South Shetland Islands.

  • PDF

$N_2$ 가스 Flow에 의한 LPCVD 방법으로 증착된 다결정 실리콘 박막의 산소농도 저하 (Reduction of Oxygen Concentration in the LPCVD Polysilicon Films Deposited by $N_2$ Gas-Flow Method)

  • 안승중;정민호
    • 한국재료학회지
    • /
    • 제9권3호
    • /
    • pp.269-273
    • /
    • 1999
  • 일반적으로 LPCVD 방법에 의한 다결정 실리콘 박막은 $SiH_4$가스를 열분해하여 증착한다. 본 실험에서는 다결정 실리콘 박막속에 포함된 산소농도를 낮추기 위하여 실리콘 웨이퍼를 반응로 안으로 장착할 때, 20slm의 $N_2$가스를 반응로의 위에서부터 아래로 flow하였으며 박막의 산소농도를 측정하기 위하여 두께가 $1000\AA$인 박막을 증착한 다음 SIMS로 분석한 결과 반응로의 hatch에 있는 짧은 injector를 통하여 20slm의 $N_2$가스를 flow한 경우보다 박막의 산소농도가 ~30배 정도 낮아짐을 알 수 있었다. 긴 injector를 사용하여 증착된 박막의 두께 균일도, particle 및 Rs를 측정하여 박막증착의 재현성이 있음을 평가하였다.

  • PDF

반복 인장 하중을 받는 YP47 극후판 Butt 용접부의 잔류응력 재분포에 관한 연구 (A Study on Evaluation of Residual Stress Redistribution for FCA Butt Weldment of Ultra-Thick YP47 Steel Plate under Tensile Cyclic Load)

  • 강봉국;이동주;신상범
    • Journal of Welding and Joining
    • /
    • 제34권4호
    • /
    • pp.28-33
    • /
    • 2016
  • The purpose of this study is to evaluate the redistribution of transverse residual stress in the multi-pass FCA butt weld of YP47 in the hatch coaming top plate of ultra large size containership under the tensile cyclic load. In order to do it, the configuration of modified H type specimen including restraint length was first designed to simulate the restraint condition of the butt weld in hatch coaming top plate. FE analysis procedure for evaluating the transverse residual stress was verified by comparing the calculated mean and surface residual stresses with the measured results in the test specimen. After that, the effect of the cyclic load on the redistribution of transverse residual stress was evaluated by comprehensive FEA. From the results, it was found that although the maximum transverse residual stress decreased with an increase in the applied maximum load, the effect of the cyclic load on the mean residual stress is small enough to be negligible. It is because the maximum stress of the ship corresponding to the probability of 10E-8 is less than 70% of yield stress of the weld.

안드로이드 플랫폼에서 치매환자를 위한 스마트 서비스 모델 (Smart Service Model for Dementia Patients in Android Platform)

  • 조영복;우성희;이상호;이영성
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2014년도 추계학술대회
    • /
    • pp.711-714
    • /
    • 2014
  • 현재 우리나라는 노인성 치매 환자를 위한 사회복지정책이 미비한 상태이기 때문에 환자 가출 및 실종 사건이 증가하고 있어 사회적으로 심각한 문제를 초래될 수 있다. 통신 기술의 발달 및 스마트 기기의 보급과 함께 모바일 어플리에케션을 통한 치매의 진단은 모바일 기기와의 상호작용이 검사자를 대신하여 치매 자가 진단의 가능성과 그 기능을 충족시켜줄 수 있을 것이다. 따라서 보급 화된 스마트 폰을 이용해 치매환자의 뇌파 분석법을 이용해 치매환자를 위한 서비스 모델을 제시한다. 제안 논문의 스마트 서비스 모델은 안드로이드 플랫폼에서 치매환자의 증상을 파악하고 주변인에게 알림으로 환자의 관리가 편리해 질수 있다.

  • PDF