• Korean Journal of Ecology and Environment
• /
• v.38 no.3 s.113
• /
• pp.393-402
• /
• 2005

The field scale experiment was performed to examine the effect of plant coverage on the constructed wetland performance and recommend the optimum development and management of macrophyte communities. Four sets (each set of 0.88 ha) of wetland (0.8 ha) and pond (0.08 ha) systems were used. Water flowing into the Seokmoon estuarine reservoir from the Dangjin stream was pumped into wetland system. Water depth was maintained at 0.3 ${\sim}$ 0.5 m and hydraulic retention time was managed to about 2 ${\sim}$ 5 days; emergent plants were allowed to grow in the wetlands. After three growing seasons of the construction of wetlands, plant coverage was about 90%, even with no plantation, from bare soil surfaces at the initial stage. During the start up period of constructed wetlands, lower water levels should be maintained to avoid flooding newly plants, if wetland plants are to be started from germinating seeds. Effluent T-N concentration in low plant coverage wetland was higher in winter than high plant coverage wetland, whereas no T-P effluent concentration and removal efficiency difference was observed within 15% plant coverage. Dead vegetation affected nitrogen removal during winter because it is a source of organic carbon which is an essential parameter in denitrification. Biomass harvesting is not a realistic management option for most constructed wetland systems because it could only slightly increase the removal rate and provide a minor nitrogen removal pathway due to lack of organic carbon.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.2
• /
• pp.144-150
• /
• 1987

To increase the feed value of corn stover after grain harvesting, these studies were conducted to evaluate the methods and effects of intercropping with corn and legume crops, soybean and cowpea. Basic studies were designed to detect the light receiving efficiency of intercrops with change of row-space and interrowspace under plant density of the level of 5,555 plants/l0a. Another study was conducted to select the favorable varieties for intercropping. The plant space of 90 x 20 cm was more effective to increase the light receiving effeciency of intercrop without decrease the yield of corn than that of 60 x 30 cm. Among several corn hybrid/varieties, erect leaf type was desirable for intercropping with high light penetration. Silage yield of intercropping with corn and legume crops increased above 20% without decrease of grain yield of corn compared with monocropping. The silage of intercropping appeared as a good quality roughage bulky feed with high content of crude protein and fat.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.2
• /
• pp.144-149
• /
• 2008

This study aims to understand the growth and changes of nutritional composition in five winter forage crops including barley, wheat, oat, rye and triticale. In Korea, the winter-season cultivation of the crops could enhance land use efficiency and improve the global competitiveness of domestic livestock industry by providing high quality forage. Total content of crude protein in plants decreased after heading. Leaves and spikes had high crude protein while stem showed the lowest with less than 7%. Contents of Acid Detergent Fiber (ADF) in plants decreased with time after heading. Stem showed much greater content of ADF than leaves and spikes. There was linear relationship between ADF contents and ratios of stem weight and total weight. Contents of Neutral Detergent Fiber (NDF) also decreased with time after heading. Stem contained much higher NDF than leaves and spikes. There was a linear relationship between NDF contents and ratios of stem weight and total weight. Relative Feed Value (RFV) increased with maturing of spikes after heading in barley, wheat, oat and triticale. There was a negative relationship between Relative feed value and ratios of stem weight and total weight.

• Journal of Animal Environmental Science
• /
• v.11 no.1
• /
• pp.11-16
• /
• 2005

The round bale wrappers are generally used for rice straw after the harvesting of low land rice by combine harvester. In this situation, the bale wrappers should be well adapted under the travelling over raised borders and temporary ditches in soft soil of narrow rice fields. The study was conducted to improve the performance of bale wrapper through the new design for compact size, lowered gravity center and lowered power consumption. The prototype of round bale wrapper had been designed and assembled to tractor with three point hitch mounted. The machine type is one roll driving system with one roll for rotating and one roll for wrapping. The driving torque and work performance of the machines were measured and analysed. The torque requirement of the prototype and conventional type was 6kgf-m and 12kgf-m, respectively. The prototype shaved less friction resistance between bale driving roll and round bale. and the power requirement can also be reduced from 12kgf-m in the conventional to 6kgf-m in the prototype. The work efficiency of the new bale wrapper was $45\%$ higher than the conventional wrapper, and the working cost of the prototype can be reduced $17\%$ than that of the conventional.

• Journal of Bio-Environment Control
• /
• v.13 no.1
• /
• pp.1-7
• /
• 2004

This study is kinematics for the manipulator development of cucumber harvesting. A theory value was verified by repeated error measurement after the forward kinematics or inverse kinematics analysis of manipulator. Manipulator is consisted of one perpendicular link and two revolution link. The transformation of manipulator can be valued by kinematics using Denavit-Hartenberg parameter. The value of inverse kinematics which is solved by three angles faction shows two types. Repeated errors refered maximum 2.60 mm, 2.05mm and 1.55 mm according to X, Y, Z axis. In this study, the actual coordinates of maximum point and minimum point were agreement in the forward kinematics or inverse kinematics. The results of repeated error measurement were reflect to be smaller compared to a diameter of cucumber. measurement errors were determined by experimented errors during the test. For reducing errors of manipulator and improving work efficiency, the number of link should be reduced and breeding and cultural environment should be considered to reduce the weight and use the hard stuff. The velocity of motor for working should be considered, too.

• Archives of Hand and Microsurgery
• /
• v.23 no.4
• /
• pp.223-229
• /
• 2018

Purpose: A number of procedures were introduced to stabilize the 1st metacarpal bone after resection of the trapezium in the thumb carpometacarpal joint (CMCJ) arthroplasty. However, some surgical procedures may inevitably damage normal structures, such as harvesting tendons or drilling of a bone for tendon passage. Suture suspension arthroplasty is relatively less invasive and easier to perform than the previously described surgical methods. The purpose of this study was to report the therapeutic efficiency of the suture suspension arthroplasty. Methods: We retrospectively reviewed 12 patients who underwent suture suspension arthroplasty for the treatment of thumb CMCJ arthritis. Pain visual analogue scale (VAS), satisfaction about surgical outcomes, and the disabilities of the arm, shoulder and hand (DASH) scores were measured to evaluate the functional outcomes and the Trapezial Space Ratios were measured. Satisfaction was measured in the range of "very dissatisfied" (0) to "very satisfied" (10). Results: The mean follow-up period was 23 months. Pain VAS score improved significantly from 7.0 to 2.9 (p<0.05). And mean satisfaction scale was 6.9. However, there was no significant difference in DASH scores between before and after surgery (p=0.06). The mean trapezial space ratio was calculated to be 0.45 before surgery, 0.33 immediately after surgery, 0.23 at the last follow-up. Conclusion: Suture suspension arthroplasty is a satisfactory surgical procedure. And compared with other procedures, there is no significant difference in the reduction of the trapezial space. It may be useful in advanced thumb CMCJ arthritis.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.4
• /
• pp.384-389
• /
• 2018

Cultivation techniques of proso millet (Panicum miliaceum L.) and foxtail millet (Setaria italica L.), such as sowing, weeding, and harvesting, are often not properly utilized, resulting in low productivity rates. The goal of this study was to develop cultivation techniques to increase millet productivity rates and reduce labor inputs. We evaluated the effects of different machine sowing methods compared with manual sowing methods from 2014 to 2016. The three machine sowing methods were dibbling, drilling, and broadcasting. Compared with manual sowing, the broadcasting method decreased labor times by 16.07 and $14.23hr10a^{-1}$ for proso and foxtail millets, respectively. Proso millet showed greater culm lengths at 138 and 125 cm with the broadcasting method for two years, whereas foxtail millet after three years had greater culm lengths from both the drilling and broadcasting methods. Both crops exhibited the thickest culm stems in the $3^{rd}$ year. The greatest number of seeds of the panicle were from the manual sowing method in both crops. Compared with manual sowing, broadcasting increased grain yields by 15-35% and 9.1-28% for proso and foxtail millets, respectively. Therefore, we suggest that the application of broadcasting in mechanical sowing will increase labor efficiency and yields of proso and foxtail millets.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.5
• /
• pp.280-289
• /
• 2002

This study was conducted to evaluate the effects of annual application of slowle cooled slag silicate fertilizer on rice yield and soil chemical properties. Field experiment was done on the condition of fertilization of silicate fertilizer 1,500 and $2,500kg\;ha^{-1}$ to the clay loam paddy field during 26 years from 1975 to 2000. The results obtained were as follows; Rice yield of NPK+silicate fertilizer $1,500kg\;ha^{-1}$ and $2,500kg\;ha^{-1}$ were increased by 15%, 8% respectively incomparion with NPK control plot in 2000($26^{th}$ year). Changes in average rice yield for 5 years interval were continually showed increase in the treat of silicate fertilizer $1,500kg\;ha^{-1}$ compared to NPK and NPK+silicate fertilizer $2,500kg\;ha^{-1}$ treated plot. The amounts of N, $K_2O$, CaO and MgO in the treat of silicate fertilizer $1,500kg\;ha^{-1}$ were much more than those of silicate fertilizer 2,500kg treated plot, and the treat of silicate fertilizer $1,500kg\;ha^{-1}$ showed higher in nutrients availability and fertilizers use efficiency than other treated plots at harvesting stage. Amount of N, $P_2O_5$, $K_2O$ and MgO in unhulled rice grain, those of CaO, MgO and $K_2O$ in rice straw and those of $K_2O$ and $SiO_2$ in rice root were positively recognized significant relationships with grain yield. According to soil analysis after experiment in 2000, the silicate fertilizer $2,500kg\;ha^{-1}$ annually applied plot were increased especially in soil organic matter, CEC and available phosphate content in comparison with NPK+silicate fertilizer $2,500kg\;ha^{-1}$ applied plot.

• Journal of Life Science
• /
• v.17 no.1 s.81
• /
• pp.82-90
• /
• 2007

In an attempt to establish the appropriate ventilation device for the bottle culture of king oyster mushroom (Pleurotus eryngii), we investigated carbon dioxide concentration and fruiting body formation according to the various ventilation systems within the mushroom house. In addition to, the efficiency of air circulation and growth rate as well as the appearance of physiologically abnormal phenotypes during their growth stage were also evaluated. four different ventilation devices, parallel-pressure type, positive-pressure type, negative-pressure type, and positive- and negative-pressure type were applied in this study. The positive-and negative-pressure type showed the highest efficiency of air circulation as $CO_2$ concentration was 800 ppm and the level of air current was relatively low compared to the other types (the $CO_2$ concentration of parallel-pressure type was 1,400 ppm). Moreover, the stipe length, the cap diameter, yield, and general quality grown in positive- and negative type ventilation device were also better than in the other three devices though it took slightly longer period for harvesting (18.4 days) than the others (17.6, 17.9 and 18.3 days). The appearance of physiologically abnormal phenotypes such as fruiting body lump, soft rot, and brown rot were significantly decreased in positive-and negative type compared to other types, while the appearance rates were not much different for other symptoms of bacterial ooze, stipe limb and stipe bumpy. In summary, we propose that the optimal ventilation system for the bottle culture of king oyster mushroom is positive- and negative type, and this device is expected to increase the total quality as well as yield all year around.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.1
• /
• pp.50-57
• /
• 1985

An attempt was made to determine the optimum levels of sewage sludge application for seogwangbyeo in the farmer's field. 1. Optimum amount of sewage slude application was 338kg/11a at the fertilizer (N-P-K) level of 15-10-10kg/10a, 430kg/10a at that of 7.5-10-10kg/10a and 544kg/10a at no fertilizer. 2. Number of tillers during all growing period were increased with amounts of sewage sludge and/or chemical fertilizers. 3. Panicles per hill was increased but percent ripeness was decreased with the application of increasing level of sewage sludge and/or chemical fertilizer. In particular, the decrease of ripeness among yield-related components sotood out as an important one to be solved for higher yield. 3. Panicles per hill was increased but percent ripeness was decreased with the application of increasing level of sewage sludge and/or chemical fertilizer. In particular, the decrease of ripeness among yield-related components stood out as an important one to be solved for higher yield. 4. Ripeness was remarkably decreased in high nitrogen content of soil and rice plant under heavy amounts of sewage sludge and/or chemical fertilizer. 5. Ripeness that had direct effect on yield showed significantly possitive correlation with the content of $SiO_2$ and $SiO_2/N$ in rice plant from 25 days after transolanting to harvesting stage. 6. Maximumutillzation of nitrogen and its production efficiency of absorbed nitrogen in sewage sludge were 16.6% and 31.9kg (Yield/kg, N) at the level 15-10-10kg/10a as fertilizer with amounts of sewage sludge application, and 19.0% and 31.8kg (yield/kg, N) at sewage sludge application without fertilizer.