• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.3
• /
• pp.248-254
• /
• 2020

This study was conducted to investigate the impact of harvest time on yield and seed quality in purple seed coat peanut. Compared to the average Virginia peanut variety, 'Heuksaeng', purple peanut variety has been reported to experience yield loss and reduced seed quality under delayed harvest. We examined the yield components and seed quality at different harvest times from 70 to 110 days after flowering (DAF), with harvesting occurring at intervals of 10 days. The number of mature pods per plant reached a maximum of 51.0 at 80 DAF, and average pod and seed yield peaked at 80 DAF with values of 5,229 and 3,532 kg per ha, respectively. Seed quality drastically decreased after 100 DAF, and the concentrations of two major anthocyanin compounds were significantly lower under delayed harvest. The antioxidative activities of DPPH and ABTS decreased to only 69 and 83% of their maximum values at 110 DAF. On the basis of these results, we recommend that 'Heuksaeng' is harvested approximately 10 to 15 days earlier that average Virginia-type cultivars to obtain the highest yield while minimizing the deterioration of seed quality.

• Journal of Biosystems Engineering
• /
• v.3 no.2
• /
• pp.88-99
• /
• 1978

In this study, rice harvesting systems suitable to Korean situations and the optimum timing of these systems were determined, respectively, based on experimentally determined factors such as filed yield and the milling quantity and quality measured at various levels of the grain moisture content at harvest. Rice varieties used for the experiment were the AKIBARE (Japonica-type) and the SUWEON 251 (high yielding TONGIL sister-line variety), The harvesting systems studied by the experimental work of this study were traditional system with both the wet material and dry-material threshing system by use of binder with both the dry-material and wet-material threshings, and system by use of combine. Grain samples were taken from final products of the paddy rice harvested from the experiment a fields for each system to measure the recovery rates of the milled rice. The results may be summarized as follows; 1. The milling recovery rate of the AKIBARE variety had highest value within the range of the grain moisture at harvest, showing from 21 to 26 percent. The head-rice recovery for the same variety was a little greater in the wet-material threshing than in the dry-material threshing , higher values of which , were 20 to 25 percent , seen within the range of grain moisture at harvest regardless of the harvesting systems tested. 2. The milling recovery of the SUWEON 251 , when tested for different harvesting systems and harvesting grain moisture, did not show a statistically significant different. In contrast , head-rice recovery for the systems operated by the wet-material threshing was much greater than that by the -material threshing. The difference of the recoveries between these systems range from 2.6 to 4.7 percent. 3. An assessment of the optimum period of -harvest timing for each of the harve\ulcornersting systems tested were made bJ.sed on (a) the maximum total milled-rise yield and (b) the percentage reduction in the total milled-rice yield due to untimely harvest operations. The optimum period determined are: 23-19% for the ATD, AC, STD, SBW, STW systems, 25-21% for the ATW ani ABW systems, and 27-18% for the ABD, SBD, and SC systems, respectively.

• Food Science and Preservation
• /
• v.24 no.6
• /
• pp.865-870
• /
• 2017

Yogurt is produced by fermentation of milk using bacteria known as "yogurt cultures". Most of these bacteria are probiotics such as Lactobacillus delbrueckii subsp. bulgaricus, Lb. rhamnosus, Streptococcus thermophilus, and Bifidobacterium. The domestic fermented milk market is increasing, and about 30 companies are producing yogurt. The purpose of this study was to analyze the quality characteristics of domestic commercial liquid yogurt. Total 30types of commercial yogurts were sampled and their physicochemicial properties, including pH, sugar content, acidity, viscosity, and microbial characteristics of lactic acid bacteria counts, were measured. Commercial liquid type yogurt showed a pH of 4.5, sugar content of 7.4-21.2%, total acid content of 0.4-0.9%, and viscosity of 0.1-250 cP. In terms of microbial populations, lactic acid bacteria counts were 7.2-11.3 log CFU/mL and anaerobic lactic acid bacteria counts were 8.0-11.5 log CFU/mL. The quality characteristics differed depending on the constituents of the sample and the microorganisms used. These results are related to the quality characteristics of yogurts and are useful for identifying new trends in the domestic fermented milk industry.

• Journal of Biosystems Engineering
• /
• v.22 no.1
• /
• pp.49-58
• /
• 1997

Finding of internal quality is crucial for getting under control quality of watermelon after harvest. A maturity sensing device of watermelon using repulsion characteristics was developed and evaluated. In this study, five different sensing probes were used to detect the physical changes after impact on watermelons. Total 15 watermelons were tested and evaluated into two classes: ripe and unripe. It was difficult to detect the overripe watermelons using the proposed sensor. Therefore, the results showed that the developed sensor could be used to separate unripe watermelons after harvest. The results from this study are summarized as follows. 1. It was successful to distinguish between the ripe and unripe watermelon by sensing the elastic characteristics on impact. 2. The hemisphere was best for the shape of sensing part because the hemisphere concentrate stress in impact part. 3. Among the five type developed sensor, the 1, 2, 3. 5-type sensor showed good character in distinguishing between ripe and unripe watermelon.

• ETRI Journal
• /
• v.38 no.1
• /
• pp.195-205
• /
• 2016

This paper presents a novel follicular unit (FU) classification method based on an angle variation of a boundary vector according to the number of hairs in several FU images. The recently developed robotic FU harvest system, ARTAS, classifies through digital imaging the FU type based on the number of hairs with defects in the contour and outline profile of the FU of interest. However, this method has a drawback in that the FU classification is inaccurate because it causes unintended defects in the outline profile of the FU. To overcome this drawback, the proposed method classifies the FU's type by the number of variation points that are calculated using an angle variation a boundary vector. The experimental results show that the proposed method is robust and accurate for various FU shapes, compared to the contour-outline profile FU classification method of the ARTAS system.

• Journal of Forest and Environmental Science
• /
• v.30 no.1
• /
• pp.1-14
• /
• 2014

Timber harvest in natural forests and its implications on carbon sequestration were investigated in the Southwestern Nigeria. Data on timber harvest from forest estates for a 3-year period were collected from the official record of States' Forestry Department. The data registered the species, volume and number of timbers exploited during the study period. The data were analyzed accordingly for rate of timber harvest and carbon value of the exploited timbers using existing biomass functions. Values were compared for significant differences among states using one way analysis of variance. The results showed that the most exploited logs, in terms of volume and number of trees, have the highest amount of carbon removal. There was a variation in type of timber species being exploited from each state. The total number of harvested trees from Oyo, Ondo, Ogun, Ekiti and Osun were estimated at 100,205; 111,789; 753; 15,884 and 18,153 respectively. Total quantity of carbon removed for the 3-year period stood at 2.3 million metric tons, and this translated to 8.4 million metric tons of $CO_2$. The annual carbon and $CO_2$ removal therefore were estimated at 760,120.73 tons and 2.8 million tons/ year respectively. There were significant differences (p<0.05) in the amount of $CO_2$ removed from the five states. Based on our result, we inferred that there is increasing pressure on economic tree species and it is plausible that they are becoming scarce from the forests in Southwestern Nigeria.. If the present rate of log removal is not controlled, forests could become carbon source rather than carbon sink and the on biological conservation, wood availability and climate change may turn out grave. For the forest to perform its environmental role as carbon sink, urgent conservation measures and logging policies are needed to be put in place.

• Journal of Biosystems Engineering
• /
• v.37 no.1
• /
• pp.65-74
• /
• 2012

Purpose: An autonomous robot was developed for harvesting strawberries cultivated in bench-type systems. Methods: The harvest robot consisted of four main components: an autonomous vehicle, a manipulator with four degrees of freedom (DOF), an end effector with two DOFs, and a color computer vision system. Strawberry detection was performed based on 3D image and distance information obtained from a stereo CCD color camera and a laser device, respectively. Results: In this work, a Cartesian type manipulator system was designed, including an intermediate revolute axis and a double driven arm-based joint axis, so that it could generate collision-free motions during harvesting. A DC servomotor-driven end-effector, consisting of a gripper and a cutter, was designed for gripping and cutting the strawberry stem without damaging the strawberry itself. Real-time position tracking algorithms were developed to detect, recognize, trace, and approach strawberries under natural light conditions. Conclusion: The developed robot system could harvest a strawberry within 7 seconds without damage.

• Journal of Bio-Environment Control
• /
• v.27 no.1
• /
• pp.86-93
• /
• 2018

This present study was conducted to develop the domestic cultivation kit using water celery(Oenanthe Stolonifera DC.) seed. As the result of germination rates in 3 type inbred lines, the IT 232354 had the highest initial germination rate and final germination rate, and was selected as the inbred line to be used in the cultivation kit. The development of the domestic cultivation kit was carried out using the IT 232354 seeds. It was possible to cultivate up to 3 times harvest using the same root in this cultivation kit, though the growth decreased rapidly in the $4^{th}$ cultivation. As a result of investigating the effects of the type of nutrient solution on growth of water celery, the overall growth was the lowest in the nutrient solution for Oenanthe Stolonifera DC.(N.S.D.). The shoot growth was similar to that of nutrient solution for leaves and stem vegetables (N.S.L.S.) and amino acid fermentation by-product liquid (A.F.B.L.), however in the root growth, the N.S.L.S. was more effective than A.F.B.L. When it was harvested 4 times consecutively after 1 time of planting, the last survival ratio of A.F.B.L. was 100% while their ratios were 96.4% and 49.8% each for N.S.L.S. and N.S.D. For the growth by cultivation kit type, the hole type cultivation kit increased slightly compared to the 3 hole type cultivation kit in the $1^{st}$ and $2^{nd}$ harvest, but there was no difference in the $3^{rd}$ and $4^{th}$ harvest. Total yield of one cultivation kits showed the 3 hole type cultivation kit is much higher than the 2 hole type cultivation kit. According to the results of this experiment, it is possible to harvest three times by planting one times if it was cultivated using N.S.L.S. and A.F.B.L. in the 3 hole type cultivation kit.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.1
• /
• pp.59-63
• /
• 1999

Yield and growth characteristics were compared for five rice cultivars; a new Tongil-type, so called "super-rice", Dasanbyeo, an old Tongil-type Milyang 23, two japonicas Dongjinbyeo and Ilpumbyeo, and a new plant type (NPT)line IR65600-27-1-2. The objective of this stusy was to clarify the high yielding capacity of Dasanbyeo in terms of growth characteristics. The average grain yield (9 t/ha) of Dasanbyeo was higher than that of Milyang 23 by ca. 9% that of japonicas by 20 to 30%, and that of NPT line by ca. 100%. The higher grain yield of Dasanbyeo was attributable not only to the greater dry matter production but also to the higher harvest index (HI). Dasanbyeo showed the greatest dry matter at harvest owing not only to the rapid leaf expan-sion at early growth stage and the resulting high LAI through the entire growth stage but also to the high NAR despite the high LAI. The rapid leaf expansion of Dasanbyeo at early growth stage seemed to be related in part to the profuse tillering capacity. HI was 0.53 in Dasanbyeo, 0,51 in Milyang 23, 0.41 in japonicas, and 0.35 in NPT line. Dasanbyeo was indebted for its higher HI to the relatively high grain filling ratio in spite of a much greater sink size than the other cultivars. Dasan had a greater source to sink ratio during grain ripening as measured by LAD/spikelet and dry matter production/spikelet which showed positove correlations with the grain ripening ratio. New plant type (NPT) line showed the lowest grain yield owing to the small sink size and the low grain filling ratio which seemed to have resulted from the abundant occurrence of weak-strength spikelets. The weak sink strength, in turn, seemed to have suppressed photosynthesis during the grain ripening stage.

• The Korean Journal of Pesticide Science
• /
• v.18 no.4
• /
• pp.330-335
• /
• 2014

This study was conducted to investigate residue levels of chlorantraniliprole and ethaboxam in inner part and outer leaves of a head-type Korean cabbage. Further, reduction of residues was measured after water washing, blanching and heat-cooking of the outer leaves. For chlorantraniliprole, residues in inner part and outer leaves were <0.01 mg/kg and 0.0757 mg/kg, respectively, in case of three-time spraying 30 days before harvest and <0.01 mg/kg and 1.19 mg/kg, respectively, in case of four-time spraying 10 days before harvest; for ethaboxam, <0.05 mg/kg and 0.216 mg/kg, respectively and <0.05 mg/kg and 1.18 mg/kg, respectively. Chlorantraniliprole and ethaboxam were not detected in inner part of the head-type Korean cabbage. Residue levels in outer leaves were very high as 10-100 fold as those in inner part of the cabbage. Therefore, there is no concern for safety of pesticide residues on kimchi prepared with the inner part of a head-type Korean cabbage. In addition, it needs to be noted that outer leaves should be carefully removed at harvest of the cabbage. Outer leaves water washed and blanched are called as Woogeogi, which is consumed after heat-cooking. In Woogeogi, residue concentrations of two compounds reduced to less than 10%, and further less than 5% by heat-cooking. This indicates that considerable amount of the test pesticide residues in outer leaves of a head-type Korean cabbage removed through water washing, blanching and heat-cooking.