• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.5
• /
• pp.607-613
• /
• 2018

Hydraulic systems are widely used in the field of defense, construction machinery, agricultural machinery, and general industries, due to various advantages such as quick response speed and precision control. The defense equipments such as light rescue vehicle is operated in very harsh environments, so hydraulic components used in defense equipment are required to have very high reliability. In particular, hydraulic piston pump is very important component in a hydraulic systems, so life prediction of pump is essential. Therefore, in this study, we analyze the potential failure and the main failure mode of the hydraulic piston pump for the light rescue vehicle through the FMEA analysis, and predict the life of the pump by the accelerated life test considering the usage conditions.

• Publications of The Korean Astronomical Society
• /
• v.32 no.1
• /
• pp.151-153
• /
• 2017

Early-type galaxies (ETGs) are generally dominated by old low-mass stars, which are not very productive of dust, and hot interstellar plasmas, which are very destructive of dust. Thus ETGs provide harsh environments for survival of dust. It has been found that some ETGs contain a large amount of dust, and yet its supply mechanism is not understood well. We present the result of a systematic study of dust in ETGs with the AKARI mid- and far-infrared all-sky surveys. From the AKARI result and the Ks band data obtained by ground-based telescopes, we find that there is a global correlation between the dust mass and stellar luminosity. We also compare the AKARI all-sky survey result with the CO data to discuss origins of dust in ETGs.

• Journal of Sensor Science and Technology
• /
• v.16 no.2
• /
• pp.85-90
• /
• 2007

This paper presents the growth conditions and characteristics of polycrystalline 3C-SiC (silicon carbide) thin films for M/NEMS applications related to harsh environments. The growth of the 3C-SiC thin film on the oxided Si wafers was carried out by APCVD using HMDS (hexamethyildisilane: $Si_{2}(CH_{3})_{6})$ precursor. Each samples were analyzed by XRD (X-ray diffraction), FT-IR (fourier transformation infrared spectroscopy), RHEED (reflection high energy electron diffraction), GDS (glow discharge spectrometer), XPS (X-ray photoelectron spectroscopy), SEM (scanning electron microscope) and TEM (tunneling electro microscope). Moreover, the electrical properties of the grown 3C-SiC thin film were evaluated by Hall effect. From these results, the grown 3C-SiC thin film is very good crystalline quality, surface like mirror and low defect. Therefore, the 3C-SiC thin film is suitable for extreme environment, Bio and RF M/NEMS applications in conjunction with Si fabrication technology.

• Journal of Sensor Science and Technology
• /
• v.29 no.2
• /
• pp.89-92
• /
• 2020

Polytetrafluoroethylene (PTFE) fibers are widely used in the textile industry, filter media, membrane distillation, electronic appliances, and construction. In this study, PTFE-polyethylene oxide (PEO) fibrous membranes were fabricated by emulsion electrospinning; subsequently, pure PTFE nanofibers were obtained via sintering. PTFE-PEO electrospinning solutions were prepared using different weight ratios to determine the optimized condition. As the ratio of the PEO increased, the fiber structure improved. Scanning electron microscopy and Fourier-transform infrared spectroscopy observations indicate that PEO is removed and PTFE fused gradually to form bonds among them during sintering. The obtained pristine PTFE membrane demonstrated hydrophobicity at 143.6° water contact angle and oleophilicity at 0° oil contact angle, which is known to be utilized for oil/water separation. A simple separation experiment was performed to remove oil droplets from water. The PTFE membrane exhibited good chemical stability and a high surface-area-to-volume nanofiber ratio. These excellent properties suggest that it is applicable to oil/water separation in harsh chemical environments.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.6
• /
• pp.126-131
• /
• 2012

Tire force is one of important parameters which determine vehicle dynamics. However, it is hard to measure tire force directly through sensors. Not only the sensor is expensive but also installation of sensors on harsh environments is difficult. Therefore, estimation algorithms based on vehicle dynamic models are introduced to estimate the tire forces indirectly. In this paper, an estimation system for estimating lateral force and states is suggested. The state-space equation is constructed based on the 3-DOF bicycle model. Extended Kalman Filter, Unscented Kalman Filter and Ensemble Kalman Filter are used for estimating states on the nonlinear system. Performance of each algorithm is evaluated in terms of RMSE (Root Mean Square Error) and maximum error.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.6
• /
• pp.948-953
• /
• 2015

In this paper, we studied the environmental requirements for the railway transponder system. The transponder system is comprised of a reader installed beneath the train, a tag installed on the track, and a portable programmer. Among them, the transponder tag should be designed to withstand harsh environments, such as wide operating temperature range, mechanical shock and vibration, etc. To validate stable and reliable service under railway conditions, we carried out environmental test for transponder tag. We then installed the tags on the Honam high-speed test line.

• Journal of Internet Computing and Services
• /
• v.7 no.3
• /
• pp.31-39
• /
• 2006

Ubiquitous and pervasive environment presents opportunities for a rich set of location aware applications such as car navigation and intelligent robots, interactive virtual games, logistics service, asset tracking etc. Typical indoor location systems require better accuracy than what current outdoor location systems provide, Outdoor location technologies such as GPS have poor indoor performance because of the harsh nature of indoor environments, In this paper we present a novel reducing interference location system that is particularly well suited to support context aware computing. The system, called EEM (Enhance Envelop Method) alms to combine the advantages of real time tracking systems that implement distributed environment with the suitability of infrastructure sensor network.

• Journal of Korean Society of Rural Planning
• /
• v.15 no.2
• /
• pp.97-110
• /
• 2009

The objective of this research was to develop a rural settlement demand model to analyze the determinants of settlement demand of urban residents. The point aimed at from model development was deriving stated preference of potential consumers towards rural settlement through setting a hypothetical market, and using settlement subsidy as a surrogate variable for price in the demand model. The adequate demand model deducted from hypothetical market data was derived from the basis of Hanemann's utility difference theory. In the rural settlement demand model, willingness to accept was expressed by a function of settlement subsidy. Data utilized in the analysis was collected from surveys of households nationwide. According to inferred results of the demand model, settlement subsidy had a significant influence on increasing demand for rural settlement. A significant common element was found among variables affecting demand increase through demand curve shift. The majority group of those with high rural settlement demand sought agricultural activity as their main motive, due to harsh urban environments aggravated by unstable job market conditions. Subsequently, restriction of income opportunities in rural areas does not produce an entrance barrier for potential rural settlers. Moreover, this argument could be supported by the common trend of those with high rural settlement demand generally tending to have low incomes. Due to such characteristics of concerned groups of rural settlement demand, they tended to react susceptibly to the subsidy provided by the government and local autonomous entities.

• Electronics and Telecommunications Trends
• /
• v.5 no.1
• /
• pp.55-70
• /
• 1990

SIMOX SOI is known to be one of the most useful technologies for fabrications of new generation ULSI devices. This paper describes the current status of SIMOX SOI technology for ULSI applications. The SIMOX wafer is vertically composed of buried oxide layer and silicon epitaxial layer on top of the silicon substrate. The buried oxide layer is used for the vertical isolation of devices The oxide layer is formed by high energy ion implantation of high dose oxygen into the silicon wafer, followed by high temperature annealing. SIMOX-based CMOS fabrication is transparent to the conventional IC processing steps without well formation. Furthermore, thin film CMOX/SIMOX can overcome the technological limitations which encountered in submicron bulk-based CMOS devices, i.e., soft-error rate, subthreshold slope, threshold voltage roll-off, and hot electron degradation can be improved. SIMOX-based bipolar devices are expected to have high density which comparable to the CMOX circuits. Radiation hardness properties of SIMOX SOI extend its application fields to space and military devices, since military ICs should be operational in radiation-hardened and harsh environments. The cost of SIMOX wafer preparation is high at present, but it is expected to reduce as volume increases. Recent studies about SIMOX SOI technology have demonstrated that the performance of the SIMOX-based submicron devices is superior to the circuits using the bulk silicon.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.10
• /
• pp.883-888
• /
• 2002

SiC direct bonding technology is very attractive for both SiCOI(SiC-on-insulator) electric devices and SiC-MEMS(micro electro mechanical system) fields because of its application possibility in harsh environments. This paper presents pre-bonding techniques with variation of HF pre-treatment conditions for SiC wafer direct bonding using PECVD(plasma enhanced chemical vapor deposition) oxide. The PECYD oxide was characterized by XPS(X-ray photoelectron spectrometer) and AFM(atomic force microscopy). The characteristics of the bonded sample were measured under different bonding conditions of HF concentration and an applied pressure. The bonding strength was evaluated by the tensile strength method. The bonded interface was analyzed by using SEM(scanning electron microscope). Components existed in the interlayer were analyzed by using FT-IR(fourier transform infrared spectroscopy). The bonding strength was varied with HF pre-treatment conditions before the pre-bonding in the range of 5.3 kgf/cm$^2$to 15.5 kgf/cm$^2$.