• Korean Journal of Human Ecology
• /
• v.22 no.1
• /
• pp.131-140
• /
• 2013

Eco-friendly and health-functional clothing is now becoming the target of the worldwide hot trends. The purpose of this study is to develop an eco-friendly textiles to decrease environmental pollution and to be harmless for human health by investigating how the natural chorangak liquid treatment affects the changes of mechanical properties and the hand of silk fabrics according to different treatment conditions. Treatment was varied with various temperatures ($85^{\circ}C$, $90^{\circ}C$, $95^{\circ}C$) for 90 seconds after degumming. The results were as follows: 1) The natural chorangak liquid is the most effective at the ratio of glacial acid 200ml with eggshell 20g minimizing the time limit and sludge reduction. Its treatment of silk fabrics is optimized at $90^{\circ}C$ for 90 seconds with 25% conc. after degumming when considering tenacity and elongation. 2) After the treatment, tenacity and elongation of specimen are increased compared with those of degummed silk fabrics. 3) After analyzing the effect of the treatment on the characteristic values of basic mechanical properties of silk fabrics, mechanical properties (tensile, bending, shearing, compression, surface) are overall improved. The properties of thickness and weight are increased as well. 4) Based on the clear analysis on effects of the treatment on the mechanical properties and the hand of silk fabrics, the level of THV was enhanced from good to excellent. Therefore, chorangak liquid can be utilized satisfactorily as a new finishing agent for developing eco-friendly textiles.

• Journal of Korean Traditional Oncology
• /
• v.13 no.1
• /
• pp.1-11
• /
• 2008

Objectives: To grasp the traditional stream of cancer treatment inherited from the previous doctors. Methods: The author's research has been performed cancer treatment based on JIJU(積聚) taking the original text as a reference. Results & Conclusion: The general three outlines and five detailed rules of cancer treatment have been obtained as follows. The first outline of cancer treatment is that reinforced vital function makes cancer reduce naturally. the second is that Harmless cancer can coexist in human beings and aging with them. and the third is that Elimination and reinforcing therapies should be executed in appropriate era and those therapies should utilize appropriate methods. The first detailed rule of cancer treatment is when using reinforcing therapy, it must applicate mildly and when using elimination therapy, it must applicate calmly. The second detailed rule is that the methods of cancer treatment are different from each cancer stage. The concentration should be made on reinforcing therapy at early stage while reinforcing and elimination therapies must be conducted together at middle stage. At terminal stage reinforcing therapy is the sole method to be taken. The third detailed rule is that the basis property of cancer drug is warm nature and extremely biased property should be avoided and when complication arises (eg. inflamatory disease, cancer fever, etc), cold or cool nature can be applied. The fourth detailed rule is that Cancer drug must have the effect eliminating the blood stasis, phlegm and excessive fluid, all together. The fifth detailed rule is that Physicians have to control patient's stress or stress related symptom and teach patients about right way of taking care of themselves and patients should take hygienic rules with their free will by themselves (eg diet, exercise, stress, etc)

• 한국문화재보존과학회:학술대회논문집
• /
• 2005.11a
• /
• pp.100-103
• /
• 2005

Lichens play an important role in breaking down rocks physically and chemically. Physical weathering occurs mechanically through hyphae and rhizines growing into the rocks. Lichen substances such as oxalic acid, acidic polysaccharides and depsides may assist altering rocks chemically. These actions partly contribute to soil formation but prove harmful for the substratum. Some people do not like to keep lichens on stained glassof churches or on gravestones mainly because of its unglamorous appearance. A biocide, 'Koretrel', is very effective in removing lichens and blue-green algae from the surface of concrete. After spraying 'Koretrel' in the open air, lichens (Caloplaca sp., Endocarpon petrolepideum, Physciella melanchra, Phaeophyscia hispidula, etc.) growing on buildings died within three months and peeled off fromthe substratum. One year after treatment, concrete surfaces were almost lichen free for three or four years. The biocide makesuse of a kind of lichen substance and harmless both for substances and environment. Our recent experiments show that it is also useful for water grasses growing on the surface of an aqueduct of a hydroelectric power station.

• Journal of the Korean Ceramic Society
• /
• v.56 no.6
• /
• pp.577-582
• /
• 2019

Recently, E-glass fiber is the one of most widely used ceramic fiber for aerospace fields. Recycling technology for waste of wind power blades is arising issue for reasons of low manageability and high cost of wastes. Though glass fiber is perfectly dissolved in hydrofluoric acid, low cost for recycling and harmless to human is important for recycling of blades. Chemically melted glass fiber will be used as different purpose like accelerator of hardening for shotcrete. In this study, dissolution process of glass fiber is tested in NaOH solution at low temperatures. In addition, difference in diameter reduction of glass fiber is observed by various alkali concentration and reaction times, treatment temperatures using FE-SEM.

• Environmental Engineering Research
• /
• v.12 no.4
• /
• pp.157-175
• /
• 2007

The membrane biofilm reactor (MBfR) creates a natural partnership of a membrane and biofilm, because a gas-transfer membrane delivers a gaseous substrate to the biofilm that grows on the membrane's outer wall. $O_2$-based MBfRs (called membrane aerated biofilm reactors, or MABRs) have existed for much longer than $H_2$-based MBfRs, but the $O_2$-based MBfR is a versatile platform for reducing oxidized contaminants in many water-treatment settings: drinking water, ground water, wastewater, and agricultural drainage. Extensive bench-scale experimentation has proven that the $H_2$-based MBfR can reduce many oxidized contaminant to harmless or easily removed forms: e.g., ${NO_3}^-$ to $N_2$, ${ClO_4}^-$ to $H_2O$ and $Cl^-$, ${SeO_4}^{2-}$ to $Se^0$, and trichloroethene (TCE) to ethene and $Cl^-$. The MBfR has been tested at the pilot scale for ${NO_3}^-$ and ${ClO_4}^-$ and is now entering field-testing for many of the oxidized contaminants alone or in mixtures. For the MBfR to attain its full promise, several issues must be addressed by bench and field research: understanding interactions with mixtures of oxidized contaminants, treating waters with a high TDS concentration, developing modules that can be used in situ to augment pre-denitrification of wastewater, and keeping the capital costs low.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.3
• /
• pp.37-43
• /
• 2001

The bleach efficiency between PY and YP bleaching of pulps, which were deinked in neutral (cellulase) and alkaline (NaOH, NaOH/${Na_2}{SiO_3}$) ranges, and were treated on kneader, was compared in this study. The brightness of pulps (84.8~88.4% ISO) which were deinked in alkaline or neutral ranges increased up to 88.4%~88.8% ISO after PY or YP bleaching. There was no difference in the brightness between PY and YP bleaching. And the dirt count of bleached pulps was similar each other at the range of 17~38 ppm. The tensile index of bleached pulps was slightly higher in PY bleaching than those in YP bleaching. While with the treatment of kneading, the brightness and dirt count decreased remarkably compared to those of no-kneading. However, the sharp difference in the brightnesses or in dirt count of bleached pulps decreased after bleaching. The brightness of bleached pulps at YP stages was only numberically higher than those at PY stages without regard to the treatment of kneading. Therefore, in the case of the neutral deinkiing process, the conversion of PY bleaching stages to YP bleaching stages was profitable to water loop system, and was harmless in the aspect of the bleach efficiency.

• Journal of Apiculture
• /
• v.33 no.4
• /
• pp.283-295
• /
• 2018

As Sacbrood virus (SBV), a causative agent of larval death and colony collapse in Apis cerana honey bee, is prevalent and poses one of the most significant threats to the Korean apiculture, development of methods to counter this viral disease is urgently needed. In this study we tested some SBV controlling methods, such as requeen, shook swam, adding Apis mellifera and spraying yogurt to SBV inoculated colony. Colony size measured by number of sealed brood and adult were evaluated every 15 days until two months while instances of recurrence were recorded up to five months after applying treatment methods. We also test the effects of yogurt on healthy and SBV-infected larvae at both in vitro reared larvae and colony level. Our result showed that all SBV controlling methods had similar success rates with respect to elimination of SBV clinical symptom up to 30 days post treatment. Mix-species and spraying yogurt method had similar pattern of sealed brood and adult number and higher than that of other SBV controlling methods up to 45 days post treatment. These two groups also showed the lower percentage of SBV recurrence (50% and 66.7%) at 120 days post treatment than other group that mostly colony had clinical symptom. Result on in vitro reared larvae challenged with yogurt showed that yogurt have neither harmless on healthy larvae nor remedial effect on SBV infected larvae. However, at colony level, colony in group received yogurt treatment removed significantly more SBV-infected larvae, SBV-killed larvae, and even healthy larvae in comparison to the control, suggested that yogurt could trigger the hygienic behavior of nurse bee. Our results recommended that it is practical in beekeeping by adding A. mellifera and spraying yogurt to control SBV in A. cerana colony.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.3
• /
• pp.256-261
• /
• 2013

PURPOSE. Occlusal splints are commonly used to prevent tooth wear caused by bruxism. However, the effects of splints on occlusion are still unclear. Although it is rarely alluded in literature, splints can provoke severe occlusal alterations and other complications. This study was aimed to identify differences in the responses of individuals with bruxism and healthy individuals to a full-arch maxillary stabilization splint in terms of occlusal changes. MATERIALS AND METHODS. Occlusal contacts in 20 (5 male, 15 female) bruxism patients and 20 (5 male, 15 female) controls with normal occlusion were evaluated before and after occlusal splint therapy. T-Scan III, a computerized occlusal analysis system, was used to simultaneously measure occlusion and disclusion times as well as left-right and anterior-posterior contact distributions before splint therapy and 3 months after therapy. Wilcoxon and Mann-Whitney U tests were used for statistical analyses (${\alpha}$=.05). RESULTS. No differences were found in the posterior contact of bruxism patients before and after stabilization splint treatment. However, differences in posterior contact were observed between bruxists and normal individuals prior to treatment, and this difference disappeared following treatment. CONCLUSION. The results of this study showed the use of a stabilization splint may not have an effect on occlusion. However, the area of posterior occlusal contact among bruxists was found to be greater than that of normal individuals. According to this study, the clinical use of splints may be harmless.

• Progress in Medical Physics
• /
• v.30 no.1
• /
• pp.32-38
• /
• 2019

Purpose: The objective of this study is to evaluate the geometrical accuracy of a patient-specific bolus based on a three-dimensional (3D) printed mold and casting method. Materials and Methods: Three breast cancer patients undergoing treatment for a superficial region were scanned using computed tomography (CT) and a designed bolus structure through a treatment planning system (TPS). For the fabrication of patient-specific bolus, we cast harmless certified silicone into 3D printed molds. The produced bolus was also imaged using CT under the same conditions as the patient CT to acquire its geometrical shape. We compared the shapes of the produced bolus with the planned bolus structure from the TPS by measuring the average distance between two structures after a surface registration. Results and Conclusions: The result of the average difference in distance was within 1 mm and, as the worst case, the absolute difference did not exceed ${\pm}2mm$. The result of the geometric difference in the cross-section profile of each bolus was approximately 1 mm, which is a similar property of the average difference in distance. This discrepancy was negligible in affecting the dose reduction. The proposed fabrication of patient-specific bolus is useful for radiation therapy in the treatment of superficial regions, particularly those with an irregular shape.

• The Research Journal of the Costume Culture
• /
• v.19 no.2
• /
• pp.324-333
• /
• 2011

This study was accomplished for the purpose of developing a textile processing ingredient that is harmless to the human body and environment. The research method consists of dyeing cotton textiles by extracting the dye solution from ginseng. Then, chrominance, after treatment, antibacterial ratio and deodorization ratio of cotton fabrics dyed with ginseng extracts were tested and results were examined. The research procedure involved first extracting the dye solution from the ginseng's by-product (fine roots) and then dyeing was effectuated differently according to the test samples temperature and dyeing time requirements. Brightness in all dye substances was lower in pre-mordanting. Beige color could be extracted from pre-mordanted samples. And dark orange from postmordanted samples. Color-festness was high in all samples. Most of samples show a big antibacterial ratio and deodorization ratio. Through this research it has been discovered that, when applied to textiles, Korea's ginseng extract possessed reproducibility features as a natural dye and a possibility to be used in cutting which plays a crucial role in hygienic processing. In addition, by using ginseng's by-product for dyeing processing as the dye solution, efficient application of resources and occurrences of no water waste damages were demonstrated and thus, proved to be environmentally-friendly. Specifically, through this experiment, it was found that saponin, ginseng's special characteristics, possessed excellent antibacterial odor repelling functions to clothing as well as the capability to prevent skin disease.