• Environmental Engineering Research
• /
• v.22 no.3
• /
• pp.277-280
• /
• 2017

Destablization and demulsification is a difficult task for the treatment of waste oil-in-water drilling fluid because of its "three-high" characteristics: emulsification, stabilization and oiliness. At present, China is short for effective treating technology, which restricts cleaner production in oilfield. This paper focused on technical difficulties of waste oil-in-water drilling fluid treatment in JiDong oilfield of China, adopting physical-chemical collaboration demulsification technology to deal with waste oil-in-water drilling fluid. After oil-water-solid three-phase separation, the oil recovery rate is up to 90% and the recycled oil can be reused for preparation of new drilling fluid. Meanwhile, harmless treatment of wastewater and sludge from waste oil-in-water drilling fluid after oil recycling was studied. The results showed that wastewater after treated was clean, contents of chemical oxygen demand and oil decreased from 993 mg/L and 21,800 mg/L to 89 mg/L and 3.6 mg/L respectively, which can meet the requirements of grade one of "The National Integrated Wastewater Discharge Standard" (GB8978); The pollutants in the sludge after harmless treatment are decreased below the national standard, which achieved the goal of resource recovery and harmless treatment on waste oil-in-water drilling fluid.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.711-714
• /
• 2001

A new technology to make fluoride gas such as NF$_3$contained in the exhaust gas from semiconductor manufacturing plants convert directly into a harmless substance have been established and new concept on the disposal treatment of global warming gases were presented. Experimental results verify that the chemical reactions can be take place at substantially lower temperature of 80-40$0^{\circ}C$ as compared with the combustion treatment method. Reaction product is mainly metal fluoride which is a harmless and a valuable chemical material as one of new resources. The other favorable characteristics are that the continuous treatment is possible at a low temperature under atmospheric pressure. Furthermore this process is compact, easily controllable and safely operable at low running cost. This paper concerns with a new harmless disposal treatment of toxic global warming gas.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.2
• /
• pp.199-215
• /
• 1992

Sources of organic waste materials for aerobic and/or anaerobic degradation, or for composting of solid wastes in Germany were estimated. The basic microbiology and the energetics of these processes were compared with special emphasis on anaerobic degradation, for which a general degradation scheme of carbohydrates is presented. Advantages of anaerobic over aerobic treatment processes are pointed out and conditions for maintaining a highly stable anaerobic process as well as producing a sanitized, hygienic product are discussed. Reactor systems suitable for efficient treatment of wastes with a high or low proportion of suspended solids are principally compared and results of laboratory studies on the degradation of several wastes and animal manures summarized. Finally, a piggery slurry treatment factory for an ultimate slurry processing to obtain a dry fertilizer and a harmless, disposable liquid, as it is in operation in Helmond/Holland, is presented and preliminary process data are presented.

• The Journal of the Korean dental association
• /
• v.20 no.3 s.154
• /
• pp.233-237
• /
• 1982

A review of the literature was presented, illustrating the effect that gingivally retained orthodontic elastic bands have on the periodontal tissues. A case report was presented for treatment of mobile maxillary central incisors secondary to a subgingival elastic band. Following surgical removal of elastic band and periodontal debridement, the teeth were successfully retained with active orthodontic appliances. Until a harmless radiopaque medium can be safely incorporated into elastic bands, extreme caution in their use should be observed. Not only should all attempts be made to anchor the elastic bands to the clinical crown, but the patient should receive through instructions in their placement and removal.

• Journal of Korean Medical Ki-Gong Academy
• /
• v.12 no.1
• /
• pp.34-49
• /
• 2011

Objective : This research was carried out to find out the general understanding of korean medicine and the attitude toward medical gigong among common people. Methods : Randomly selected 297 people participated in this research. We performed this survey with 13 items on the Questionnaire Results : 13.1% of respondents knew qigong training, and 7.1% of respondents knew medical qigong. Most respondents knew one or more terms of qigong. Among them, the order was known as meridian, danjeon, sojucheon. 57.6% of respondents had a mind to be in a treatment of medical qigong. And 45.7% of respondents were satisfied with the harmless of medical gigong. However, 41% were unsatisfied with the low effect of the treatment. Conclusions : Medical gigong treatment need to develop an explanatory model which based on static study. And technically advanced public relations are needed.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.4
• /
• pp.297-301
• /
• 2017

Wastewater treatment using ferrate (VI) solution is becoming a promising technology for several years, because it is high efficient and harmless technology. In this study, the ferrate (VI) solution was tested to treatment of desulfurization wastewater. The effluent from desulfurization wastewater treatment process of power plant was used as raw water, and the COD and T-N removal efficiency of ferrate(VI) solution were investigated. In the test, as the injection rate increased from 0.1 to 1.0%, the removal efficiency of COD also slightly increased, about 80% of COD were removed in 1.0% of injection rate. In the case of T-N, about 50% of T-N was removed in the condition of 1.0% of injection rate. The removal efficiency of COD and T-N also affected by reaction time, maximum removal efficiency was shown in 30 min of treatment. From these results, the wastewater treatment with ferrate(VI) solution can be great solutions for treatment of non-biodegradable pollutants in wastewater, especially for the 3rd treatment of wastewater.

• Clinical and Experimental Pediatrics
• /
• v.54 no.6
• /
• pp.229-233
• /
• 2011

In the pediatric literature, excessive crying has been reported solely in association with 3-month colic and is described, if at all, as unexplained crying and fussing during the first 3 months of life. The bouts of crying are generally thought to be triggered by abdominal colic (over-inflation of the still immature gastrointestinal tract), and treatment is prescribed accordingly. According to this line of reasoning, excessive crying is harmless and resolves by the end of the third month without long-term consequences. However, there is evidence that it may cause tremendous distress in the mother-infant relationship, and can lead to disorders of behavioral and emotional regulation at the toddler stage (such as sleep and feeding disorders, chronic fussiness, excessive clinginess, and temper tantrums). Early treatment of excessive crying focuses on parent-infant communication, and parent-infant interaction in the context of soothing and settling the infant to sleep is a promising approach that may prevent later behavioral and emotional disorders in infancy.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.265-266
• /
• 2006

The chemical conversion coating formed on magnesium alloy investigated for low cost and harmless in environment by using the colloidal silica as the main component. The film formed in 298 K is thick, the film, which was thought combination of Si-O, was formed. The film formed in 313 K is thinner than that in 298 K. The quantity of film formed at high temperature such as 333 K and 353 K is smaller than dissolved quantity. At the anodic polarization experiment, corrosion resistance in sealing by hot water after chemical conversion treatment in basic solution condition get worse than that in comparison with basic solution condition. In salt spray test, the ratio of black rust on specimen that did not conducted chemical conversion treatment was five times or more compared with those of chemical conversion treated specimen. The film thickness of chemical conversion coating produced by alkali treatment process is thinner than in comparison with that of specimen produced in basic chemical conversion treatment solution condition. It is thought, however, that it showed good corrosion resistance during salt spray test because the area of microcracks is small.

• Journal of information and communication convergence engineering
• /
• v.7 no.2
• /
• pp.223-230
• /
• 2009

For pulse trigger way and the energy injection rate according to PET ($Pause^{10-90}$ $Energy^{20-40}$ $Trigger^{1-7}$) function, indeed, human body condition, period of dormancy in this research about this back correctly adjustment possible and designed harmless micro carrying along style hair exclusion so that can design and manufacture and run special quality examination and Xenon flash lamp to crawl in human body. Because creating individual's skin model to do stable treatment by light transmission way by skin impedance and measure, must embody treatment special quality of most suitable that draw skin color, energy, wave length, approximately, transmission time, pulse delay etc. and want. Specially, saved standard of war treatment pulse modeling by skin impedance, and manufacture pulse modeling system of most suitable by skin subordinate, and embody suitable treatment pulse. Specially, embody as could do root of a hair exclusion being emitted in pulse form using multi wave length of 560nm, 590nm, 640nm, 755nm and embodied clinical data. If become research repletion furthermore little more, is seen that can approximate in commercialization.

• Tribology and Lubricants
• /
• v.30 no.6
• /
• pp.343-349
• /
• 2014

Currently, in order to resist the scratching of the fuel rod surface while fabricating the fuel assembly of the light-water nuclear reactor, we use a solution of nitrocellulose, an explosive material, as a dry lubricant along with its solvent. However, the demand for developing safe and harmless aqueous alternative materials for environment-conservation and field-worker safety has increased. In this study, we demonstrate the preparation of a novel aqueous resin composite using a formulation of aqueous polymeric resin, alcoholic solvent, and water. Subsequently, we characterize this composite on the basis of hardness, adhesive property, and water solubility using plates similar to the fuel rod material. The insertion test of a fuel rod coated with the YS-3 composite shows load values of $18.8-20.5kg/cm^2$, which is comparable with $18.8-20.5kg/cm^2$ of the nitrocellulose coating agent. In addition, the depth and width of longitudinal scratches caused by the YS-3 composite test are 50% higher than those of the standard. We can develop a harmless and safe aqueous dry lubricant to replace the existing NC products through field testing of 264 pieces of fuel rods, after producing 350 kg of the YS-3 prototype. The scratch test for the rod surface showed that weight of chip of YS-3 prototype was smaller than that of NC before and after solvent treatment, indicating the properties of YS-3 prototype was comparable to the counterpart.