• Journal of the Korean Society of Tobacco Science
• /
• v.31 no.1
• /
• pp.39-44
• /
• 2009

Hydrogen cyanide (HCN) is present in both the particulate and vapor phase of cigarette mainstream smoke. It is one of the 44 harmful substances on Hoffmann's list and is known to be a major ciliatoxic agent in cigarette mainstream smoke. Typically the determination of HCN in cigarette mainstream smoke has been done through colorimetric and electrochemical techniques, such as UV-spectrophotometry (UV), continuous flow analyzer (CFA), ion chromatography (IC) and capillary GC-ECD. In particular, CFA commonly has been using analysis hydrogen cyanide in cigarette smoke and the basic principle is pyridine-pyrazolone reaction. In this study, the more optimized analytical method is suggested isonicotinic acid-pyrazolone reaction method than previous pyridine-pyrazolone reaction method, a commonly used method for the determination of cyanide in water and air, by CFA. Sample collection was optimized by trapping particulate and vapor phase of smoke separately. The optimum NaOH concentration of the trapping solution was shown to be 0.2 M. HCN was stable up to 6 hours in this concentration but only 3 hours in 0.1 M solution. The sensitivity of this method was fairly good and it might be used in analysis of HCN in cigarette mainstream smoke.

• Archives of Plastic Surgery
• /
• v.33 no.1
• /
• pp.131-134
• /
• 2006

The closed suction drain is commonly inserted after various surgical procedures. It has an important role to prevent possible hematoma or seroma that can cause postoperative wound problems. But there is still no consensus on managing the insertion site of suction drain after operation. Suture-tie fixation of drain to skin and classical Y shape gauze dressing is a usually accepted method, but it has many limitations. We introduce a new approach to the care for the insertion site of suction drain by using occlusive transparent film dressing, $IV3000^{(R)}$(Smith & Nephew, London, UK). By using transparent film, insertion site of drain can be easily checked without removal of dressing. Because it can reduce the tension of suture-tie fixation, it helps to prevent skin injury. Furthermore, occlusive film dressing can block air leakage from insertion site of drain, and the water-proof character of film allows patients to take a shower without dressing change. This new method is more convenient, more efficient, and less harmful to skin than classic one.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.4
• /
• pp.442-451
• /
• 2019

Objectives: The aim of this study was to review the reduction methods for ammonia (NH₃) and hydrogen sulfide (H₂S) exposure in livestock. Methods: By reviewing domestic and international research reports from Korea and China, reducing ammonia and hydrogen sulfide in livestock pens was analyzed in terms of ventilation, deodorant, and feed additives. In addition, exposure limits in Korea and China were examined through a comparison between 'TLV-TWA and STEL under the Industrial Safety and Health Act in Korea' and 'Management Standards for Air of Livestock Pens in China'. Results and Discussion: In order to effectively control hazardous gases and odors in livestock pens, the enhancement of natural ventilation or the addition of ventilation fans at the pollution source are being examined. Deodorants are used as adsorbents or masking deodorants. Additives to feed were zeolite powder, FeSO₄·7H₂O, enzymes, and microbial preparations. Use of feed additives was low-cost and had significant effects compared to other methods. Zeolite was the most commonly used in feed additive in Chinese cases and proved to be low-cost and effective for reducing harmful gases. Enzyme preparations were shown to stimulate the growth of livestock, but were expensive. Conclusions: This study reviewed and examined domestic and international research papers in Korea and China for reducing ammonia and hydrogen sulfide concentrations in livestock pens. More diverse research and the development of feed additives are needed.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.5
• /
• pp.27-37
• /
• 2020

As domestic meat consumption increases, the broiler production industry has been larger and denser. The concentration of particulate matter (PM) and harmful gases generated is also increasing inside livestock house. However, the current research status of PM exposed to farm workers and the health effects are in the early stage. To understand PM concentration affecting workers in the broiler house, field monitoring was conducted according to its size distributions. Concentrations of PM₁₀, PM_2.5, and TD (Total Dust) were monitored using personal air samplers with teflon filter during working and moving periods considering the ventilation systems of 6 broiler houses. The purpose of this study is to monitor the PM concentration in the experimental broiler houses operated by forced ventilation system generally used in Korea and to evaluate the regional concentrations through airflow pattern. The PM concentrations were increased from inlet to outlet vents resulting in 1,872 of TD, 1,385 of PM₁₀, and 209 ㎍/㎥ of PM_2.5, respectively. The TD and PM₁₀ concentrations were increased when the workers and broilers were moving. Among them, the particle size that occupied the largest amount of PM was 13.75 ㎛. These results suggest that personal protection equipments are important to reduce the health effect from PM inhalation.

• Journal of the Korean Society of Safety
• /
• v.21 no.1 s.73
• /
• pp.133-140
• /
• 2006

According to Tokyo protocol which suggests the prevention of global environmental pollution, Korean government establishes the standard of architectural materials emission consistency with best effort to decrease the environmental pollution. But many current architectural materials which are used for constructing and remodeling buildings are composed of a variety of chemicals. These include stimuli bad for the residents' health and safety and harmful discharged air polluting substances such as volatile organic compounds(TVOCs) and formaldehyde(HCHO) that in tern include a variety of carcinogen substances. These discharged substances are also researched into inducing 'sick building syndrome' which induces headache, dizziness, vomiting and concentration failure among residents. But the standard of architectural materials according to the Korean apartment provision is limited to emission factors: HCHO and TVOCs. So the aim of this study is to present a standard of functional material's emission consistency about TVOCs including glues and paints, and a certification grade for green building by instituting a materials standard for green building which has consideration for the residents' safety.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.4
• /
• pp.444-453
• /
• 2015

In the previous study, several problems were observed in a NG conversion vehicle, which were fail of air-fuel ratio closed loop control, aggravated fuel economy, increased harmful emission and declined roadability. It was provisionally supposed that the mismatch of injection system with the engine caused these performance deterioration. In this context, the characteristics of fuel injection system of commercial conversion kit for NG were investigated experimentally varying the engine speed, fuel rail pressure and volume. The results are as follows; The injection quantity decreases as the engine speed increases due to the extremely small rail volume of the presenting system and flow rate of No. 2 injector are always lower than that of the other ones regardless of the speed under the dynamic operation condition. Furthermore the existing system does not meet the required fuel quantity for the normal engine operation over 3000 RPM. On the other hands, the large rail volume systems ease and/or eliminate the difference of injection quantity between the injectors according to the speed variation, however, these systems decrease injection flow rate and still cannot supply sufficient fuel. Finally, suitable combination of the higher rail pressure and the larger rail volume might be a solution about these problems.

• Journal of Energy Engineering
• /
• v.24 no.4
• /
• pp.166-174
• /
• 2015

This study examined combustion characteristics by selecting the fuel which have a different physical properties compared to gasoline in order to examine the effects of vehicle performance and environment depending on the physical properties. The experiment examined the combustion characteristic in the optimum ignition timing according to the physical properties change and the lean burn by performing control about ignition timing and air-fuel ratio for each fuel, and it was also evaluated the exhaust gas according to the experiment. We used a single-cylinder engine for the experiment, and tested for gasoline properties change by selecting a fake fuel that beyond the fuel quality standards in 석대법. As a result, in the case of the selected fuel showed a difference in Octane and distillation characteristics, vapor pressure and it was also found to unstable combustion, and leads to a large amount of harmful exhaust gas.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.2
• /
• pp.144-156
• /
• 1999

Thermal Barrier Coating with Functional Gradient Materials (FGM-TBC) can play an important role to protect the parts from harmful environments in high temperatures such as oxidation, corrosion, and wear and to improve the efficiency of aircraft engine by lowering the surface temperature on turbine blade. FGM-TBC can increase the life spans of product and improve the operating properties. Therfore, in this study the evaluations of mechanical and thermal properties of FGM-TBC such as fatigue, oxidation and wear-resistance at high temperatures have been conducted. The samples of both the TBC with 2, 3, 5 layers (YSZ/NiCrAlY) to be produced by Air Plasma Spray method (APS) and the bulk TBC with 6 layers to be produced by Plasma Assisted Sintering method (PAS) were used. Furthermore, residual stress, bond strength, and thermal conductivity were evaluated. The average thickness of the APS was 500$\mu\textrm{m}$ to 600$\mu\textrm{m}$ and the average thickness of the PAS was 3mm. The hardness number of the top layer of APS was 750 Hv to 810Hv and that of PAS was 950 Hv to 1440Hv. The $ZrO_2$ coating layer of APS was composed of tetragonal structure after spraying as the result of XRD analysis. As shown in the results of the high temperature wear test, the 3 layer coating of APS had the best wear resistance at $800^{\circ}C$ and the 5 layer coating of APS had the best wear resistance at $600^{\circ}C$. But, these coatings had the tendency of the low-temperature softening at $300^{\circ}C$. The main mechanism of wear was the adhesive wear and the friction coefficient of coatings was increased as increasing the test temperatures. A s results of thermal conductivity test, the ${\Delta}T$ of the APS coating was increased as number of layer and the range of thermal conductivity of the PAS was $800^{\circ}C$ to $1000^{\circ}C$.

• The Journal of Pediatrics of Korean Medicine
• /
• v.15 no.1
• /
• pp.235-253
• /
• 2001

Tae-yeul is the baby's disorder inheritted by its mother during fregnancy. This is due to its mother's overeating hot, fatty food and taking harmful medicine. So internal physical fever is accumulated in mother's body, and it heats up the placenta and the umbilical cord. Generally, this disorder means the skin disease that is occurred from $2{\sim}5$ months to 1 year after birth. It is specialized by the dirty oozing, a severe itching and the rash at its head and face. It is similar in its symptoms such as atopic dermatitis in western medicine. Recently, this disease has the increasing tendency of prevalence rate because of the bad atmosphere and the invironmental pollution. The results were summerised as follows; 1, 2, 3, 4 1. The causes of Tae-yeul are summarized by fragnat woman's contacting a cool air, overating a hot and toxic food and taking emotional shock. 2. The symptoms of Tae-yeul are the edema on upper eyelids, stifling convulsions, flush, the fever of one side body, the asthma of sputum increase, the yawing of the tired mind, the bowl complaint, the red urine and urination disturbance. 3. In the treatment method of Tae-yeul, its mother feed her milk after taking a madicine. So one must expect to be treated slowly. If one tries to treat it with a cool madicine quickly, it can cause vomitting or a serious disorder. 4. In the prescription of Tae-yeul, they used a Moktongsan, a Chiwhnagtang, an Yangyoubang, a Tojuksan, a Whangyunsan, a Juryungtang and a Kamdutang, etc.. For the method of cleaning face or bathing, they used Sasungsan, Whanbaekpijuntang. 5. Tae-yeul including Naesun, Taelyumchang, yousun, etc. is similar to the atopic dermatitis of western medicine in its symptoms.

• The Journal of Korean Physical Therapy
• /
• v.17 no.3
• /
• pp.297-310
• /
• 2005

Open kinetic chain exercise has lost favour in rehabilitation after cruciate ligament reconstruction due to concerns that this exercise is harmful to the graft and will be less effective in improving function. Therefore rehabilitation has focused over the past decade on closed kinetic chain exercise. Open kinetic chain and closed kinetic chain exercises were compared for their effects on proprioception, muscle strength and knee instability in the early period of cruciate ligament reconstruction rehabilitation. The study subjects were 14 patients in 28weeks from cruciate reconstruction surgery(11 male, 3 female; mean age = 44.36 years). Closed kinetic chain exercise group used ball, balance pad and air cushion, to perform weightbearing exercises and the open kinetic chain exercise group used elastic rope and N-K table, to perform non-weightbearing exercises. Between tests, subjects trained 5 times per week for 2 weeks. Statistical analysis was by Wilcoxon signed rank test and Mann Whitney U test. In result, this study shows that both open and closed kinetic chain exercise programs lead to an improved muscle strength and Lysholm score. But there was no improvement in proprioception at both exercises. Closed versus open kinetic chain exercise in early period of rehabilitation after cruciate ligament reconstruction surgery do not differ in their effects on knee proprioception, muscle strength and instability. But the effect of closed kinetic chain exercises was showed more improvement than open kinetic chain exercises between pre-post exercises. Therefore further study is required to assess effect of both groups in more long period.