• Tribology and Lubricants
• /
• v.34 no.3
• /
• pp.84-92
• /
• 2018

Bearings are essential for reducing vibration and wear, in order to achieve high durability and increase longevity. White metal treatment of tilting pads via centrifugal casting method has the possibility of increasing durability. However, this manufacturing method has drawbacks such as long processing time, high defect rate, and harmful health effects. Laser cladding deposition technique is a powerful method that can address these issues by decreasing the processing time and providing good adhesion. In this study, we suggest optimum conditions for laser cladding deposition that can be used in industrial applications. We deposited a soft white metal layer on SCM440 that is primarily used in shafts to minimize wear of bearing pads. During the laser deposition process, we controlled factors such as laser power, powder feed rate, and laser head speed to determine the optimum conditions. In addition, we measured the hardness using micro Vickers, and performed field emission scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, and friction tests to investigate the mechanical properties and surface characteristics for different parameters. Based on the experimental results, we suggest that laser power, powder feed rate, and laser head speed of 1.3 kW, 2.5 rpm, and 10 mm/s, respectively, constitute the optimum conditions for producing white metals using laser cladding.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.10
• /
• pp.5941-5948
• /
• 2013

Tumor response to antineoplastic drugs is not always predictable. This is also true for bladder carcinoma, a highly recurrent neoplasia. Currently, the combination of cisplatin and gemcitabine is well accepted as a standard protocol for treating bladder carcinoma. However, in some cases, this treatment protocol causes harmful side effects. Therefore, we investigated the roles of the genes TP53, RASSF1A (a tumor suppressor gene) and hMLH1 (a gene involved in the mismatch repair pathway) in cell susceptibility to cisplatin/gemcitabine treatment. Two bladder transitional carcinoma cell (TCC) lines, RT4 (wild-type TP53) and 5637 (mutated TP53), were used in this study. First, we evaluated whether the genotoxic potential of cisplatin/gemcitabine was dependent on TP53 status. Then, we evaluated whether the two antineoplastic drugs modulated RASSF1A and hMLH1 expression in the two cell lines. Increased DNA damage was observed in both cell lines after treatment with cisplatin or gemcitabine and with the two drugs simultaneously, as depicted by the comet assay. A lack of RASSF1A expression and hypermethylation of its promoter were observed before and after treatment in both cell lines. On the other hand, hMLH1 downregulation, unrelated to methylation status, was observed in RT4 cells after treatment with cisplatin or with cisplatin and gemcitabine simultaneously (wild-type TP53); in 5637 cells, hMLH1 was upregulated only after treatment with gemcitabine. In conclusion, the three treatment protocols were genotoxic, independent of TP53 status. However, cisplatin was the most effective, causing the highest level of DNA damage in both wild-type and mutated TP53 cells. Gemcitabine was the least genotoxic agent in both cell lines. Furthermore, no relationship was observed between the amount of DNA damage and the level of hMLH1 and RASSF1A expression. Therefore, other alternative pathways might be involved in cisplatin and gemcitabine genotoxicity in these two bladder cancer cell lines.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.3
• /
• pp.903-907
• /
• 2015

Background: Among human epidermal growth factor receptor 2 (HER2)-positive breast cancer, more than half are also hormone receptor (HR)-positive. Although HR is a predictive factor for the efficacy of hormone therapy, there are still some uncertainties in regard to the effects on patients with HR-positive and HER2-positive metastatic breast cancers due to the potential resistance to hormone therapy caused by co-expression of HR and HER2. There are no clinical trials directly comparing the efficacy of hormonal therapy with chemotherapy. Materials and Methods: To examine the real-world effect of hormone therapy on patients with HR-positive and HER2-positive metastatic breast cancers, a cross-sectional study of a representative sample of the Chinese population was conducted. The study included 113 patients who received first-line and second-line palliative treatment between 2005 and 2010 in the Cancer Institute and Hospital, Chinese Academy of Medical Science. The effect of hormone therapy on overall survival (OS) was studied. Results: The patients who received hormone therapy (n=51) had better overall survival in contrast to those who received chemotherapy with anti-HER2 therapy (n=62) in first- or second-line treatment. The difference was of borderline statistical significance (51.8m vs 31.9m, p=0.065). In addition, the effect of hormone therapy did not differ significantly with other prognostic factors, including age (${\leq}50$ years or >50 years), disease free survival (${\geq}2$ years or < 2 years) and site of metastasis (visceral or bone/soft tissue). On multivariate analysis, administration of hormone therapy was associated with a trend toward a favorable prognosis (p=0.148, HR=0.693, 95%CI 0.422-1.139). Age more than 50 years was the sole independent harmful prognostic factor (p<0.001, HR=2.797, 95%CI 1.676-4.668). Conclusions: Our data suggest that hormonel therapy may improve outcomes of the patients with ER-positive and HER2-positive metastatic breast cancer.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.6
• /
• pp.896-902
• /
• 2015

Milking center wastewater (MCW) has a relatively low ratio of carbon to nitrogen (C/N ratio), which should be separately managed from livestock manure due to the negative impacts of manure nutrients and harmful effects on down-stream in the livestock manure process with respect to the microbial growth. Simultaneous nitrification and denitrification (SND) is linked to inhibition of the second nitrification and reduces around 40% of the carbonaceous energy available for denitrification. Thus, this study was conducted to find the optimal operational conditions for the treatment of MCW using an attached-growth biofilm reactor; i.e., nitrogen loading rate (NLR) of 0.14, 0.28, 0.43, and $0.58kg\;m^{-3}\;d^{-1}$ and aeration rate of 0.06, 0.12, and $0.24\;m^3\;h^{-1}$ were evaluated and the comparison of air-diffuser position between one-third and bottom of the reactor was conducted. Four sand packed-bed reactors with the effective volume of 2.5 L were prepared and initially an air-diffuser was placed at one third from the bottom of the reactor. After the adaptation period of 2 weeks, SND was observed at all four reactors and the optimal NLR of $0.45kg\;m^{-3}\;d^{-1}$ was found as a threshold value to obtain higher nitrogen removal efficiency. Dissolved oxygen (DO) as one of key operational conditions was measured during the experiment and the reactor with an aeration rate of $0.12\;m^3\;h^{-1}$ showed the best performance of $NH_4-N$ removal and the higher total nitrogen removal efficiency through SND with appropriate DO level of ${\sim}0.5\;mg\;DO\;L^{-1}$. The air-diffuser position at one third from the bottom of the reactor resulted in better nitrogen removal than at the bottom position. Consequently, nitrogen in MCW with a low C/N ratio of 2.15 was successfully removed without the addition of external carbon sources.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.3
• /
• pp.191-196
• /
• 2017

Owing to the harmful environmental effects of HCFC and CFC refrigerants discovered in the late 20th century, the need for environmentally friendly refrigerants such as $CO_2$ in cooling systems has increased. Air-source $CO_2$ heat pumps that utilize ambient heat in cold winter are less efficient because of a higher evaporation temperature, and it is difficult to manufacture the components of the heat pump owing to a super critical pressure of over 130 bar. This research aims to overcome these disadvantages and improve energy efficiency by introducing a new lower-pressure $CO_2$ auto-cascade heat pump system. $CO_2$-R32 zeotropic refrigerants were considered for two-stage expansion and effective cooling heat exchanging system configurations of the new auto-cascade heat pump. The results indicated that the efficiency of the two-stage expansion system was higher than that of the original one-stage expansion system. Furthermore, the two-stage expansion system showed significant performance improvements when the two-stage expansion stage from highest pressure of 70bar, intermediate expansion pressure of 25bar, and final low pressure of 10bar is applied. The COP of the new two-stage auto-cascade system (2.332) was 43.15% higher than that of the present simple auto-cascade system (1.629). Refrigerants having an evaporation temperature of $-10^{\circ}C$ or lower can be obtained that can be easily evaporated in an evaporator even at a low temperature.

• Restorative Dentistry and Endodontics
• /
• v.20 no.1
• /
• pp.33-54
• /
• 1995

The degree of conversion of composite resin was known to have influence on the mechanical properties of composite materials such as hardness, strength, wear resisitance, dimensional and color stability. Also unreacted monomer was reported to be harmful to the pulp. So the degree of conversion was a very important factor in the success of composite resin restorations. In recent, the dual cure resin cement was developed with the advocations that it could increase the curing rates in the sites where the curing ligt could not reach. Moreover many manufactors added some adhesive components in the resin cement. This study was undertaken to observe the effects of curing depth and light curing times on the degree of conversion of dual cure resin cements. CR INLAY CEMENT, DUAL CEMENT and OPTEC BOND, by the Fourier transform Infrared analysis, changing the curing depth 1mm, 2mm and 3mm, and varying the light curing time 20 seconds, 40 seconds and 80 seconds at each depth. The cytotoxicity of dual cure resin cements was tested by the in vitro MTT method using L929 cell. The results was evaluated and compared statistically. The results were obtained as follows : 1. The dual cure resin cements reavealed various degree of conversion, CR INLAY CEMENT and DUAL CEMENT had a tendency to be more reactive to the light cure and OPTEC BOND was a more chemical one. 2. CR INLAY CEMENT and DUAL CEMENT showed the lowest degree of conversion in 2 mm depth, and in 3mm depth the degree of conversion increased, which were due to the chemical cure of dual cures, but OPTEC BOND showed decreasing degree of conversion with increasing curing dept h and all experimental groups showed lower degree of conversion than CHEMICAL group which cured in dark room with no light, so the weak light-curing of dual cure resin cement prevented the chemical cure. (P<0.05) 3. CR INLAY CEMENT and DUAL CEMENT showed increasing degree of conversion in 1 mm and 3 mm, according to the increasing cure times, but in 2 mm depth the degree of conversion decreased with increasing light-curing times and OPTEC BOND showed contrary tendency, but there was no ststistical importance in the differences among the experimental group.(P>0.05) 4. The optical density by MTT assay of extractions of CR INLAY CEMENT, DUAL CEMENT and OPTEC BOND revealed no statitically important differences comparing with optical density of negative control.(P>0.05) 5. CR INLAY CEMENT showed a tendency of increaing cytotoxicity with days and DUAL CEMENT and OPTEC BOND showed higher cytotoxicity in 2 days than in 4 days, but there was no statistical importance in the differences.(P>0.05).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.10
• /
• pp.4434-4442
• /
• 2011

Reactive oxygen species (ROS) are reactive and potentially harmful to cells, causing oxidation of lipids, proteins, and DNA. In humans, the deleterious effects of ROS have been linked with aging, carcinogenesis, and atherosclerosis. In order to investigate an antioxidant activity of wood vinegar by bioconversion, we preferentially analyzed the total acidity, acetic acid, pH, and contents of total polyphenols and flavonoids, respectively. Also, we evaluated the scavenging abilities on 1,1-diphenyl-2-picrylhydrazyl (DPPH) radicals, superoxide anion radicals, hydrogen peroxide radicals, and nitric oxide radicals. The total acidity and amount of acetic acid of wood vinegar after bioconversion were lower than those of wood vinegar before bioconversion, but the pH was higher than that of wood vinegar before bioconversion. The contents of total polyphenols and flavonoids of wood vinegar after bioconversion were 11.17 mg/$m{\ell}$ and 0.42 mg/$m{\ell}$, respectively. The $SC_{50}$ values were in order of superoxide anion radical scavenging activity < DPPH radical scavenging activity < hydrogen peroxide radical scavenging activity < nitric oxide radical scavenging activity. Therefore, these results suggest that wood vinegar by bioconversion can be useful as primary antioxidants for medicines and cosmetics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.608-613
• /
• 2019

NOx (Nitrogen oxide) in the exhaust gas from vehicle engines is considered one of the most harmful substances in air pollution problems. NOx is made when combustion occurs under high temperature conditions and EGR (exhaust gas recirculation) is normally used to lower the combustion temperature. As the EGR ratio increases, the NOx level becomes low, but a high EGR ratio makes the combustion unstable and causes further air pollution problems, such as CO and unburned hydrocarbon level increase. This study showed that fuel droplets could move more freely by the radiation of sonic wave for the stable combustion. In addition, the engine performance improved with increasing EGR ratio. As a basic study, the effect of sonic wave radiation on the velocity of fuel droplets was studied using CFD software. The results showed that the velocity of small droplets increased more under high frequency sonic wave conditions and the velocity of the large droplets increased at low frequency sonic wave conditions. In addition, an engine analysis model was used to study the effects of the increased combustion stability. These results showed that a 15% increase in EGR ratio in combustion resulted in a 45% decrease in NOx and a 10% increase in thermal efficiency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.384-390
• /
• 2018

Air and soil are being contaminated by the environmental pollution as a result of climate change and urbanization, resulting in water pollution reaching serious levels. In this studies, we investigated the use of antimicrobial copper for the removal of biological pollutants from water system. Specifically, we tested its effects against E. coli, B. subtilis, S. aureus, K. pneumoniae and P. aeruginosa. Made a sphere shape having a diameter of 2cm using a strip-shaped copper wire of 0.5g, 1g and 2g. And then, to confirm the antimicrobial activities, each copper ball was equipped in the broth which inoculated each pathogens. The results showed that bacterial growth of the five test bacteria was inhibited by more than 99% after reaction with a 0.5 g copper ball for at least 20 minutes. Based on the these results, if perform the further experiment such cytotoxicity, it is expected that will be enough to be used as a filter for water quality purification. The developed technique is expected to be widely applied in various industries.

• Journal of Periodontal and Implant Science
• /
• v.32 no.3
• /
• pp.665-683
• /
• 2002

A novel glucanhydrolase from a mutant of Lipomyces starkeyi KSM 22 has additional amylase activity besides mutanolytic activity and has been suggested as promising anti-plaque agent. It has been shown effective in hydrolysis of mutan, reduction of mutan formation by Streptococcus mutans and removal pre-formed sucrose-dependent adherent microbial film and has been strongly bound to hydroxyapatitie. These in vitro properties of Lipomyces starkeyi KSM 22 glucanhydrolase are desirable for its application as a dental plaque control agent. In human experimental gingivitis　model and 6 month clinical trial, mouthrinsing with Lipomyces　starkeyi KSM 22 dextranase was comparable to 0.12% chlorhexidine mouthwash in inhibition of plaque accumulation and gingival inflammation and local side effect was negligible. This study was aimed to evaluate the cytotoxic effect of Lipomyces starkeyi KSM 22 glucanhydrolase on human gingival fibroblasts. Primary culture of human gingival fibroblasts at the 4th to 6th passages were used. Glucanhydrolase solution was made from lyophilized glucanhydrolase powder from a mutant of Lipomyces stakeyi KSM 22 solved in PBS and added to DMEM medium to the final concentration of 0.5, 1, and 2 unit. Cells were exposed to glucanhydrolase solution or 0.1 % chlorhexidine and the cells cultured in DMEM with 10% FBS and 1% antibiotics as control. After exposure, the morphological change, cell attachment, and cell activity by MTT assay were evaluated in 0.5, 1.5, 3, 6, 24 hours after treatment. The cell proliferation and cell activity was also evaluated at 2 and 7 days after 1 minute exposure, twice a day. The cell morphology was similar between the Lipomyces smkeyi KSM 22 glucanhydrolase groups and control group during the incubation periods, while most fibroblasts remained as round cell regardless of incubation time in the chlorhexidine group. The numbers of the attached cells in the glucanhydrolase groups were comparable to that of control and significantly higher than the chlorhexidine group. The numbers of the proliferated cells in the glucanhydrolase groups at 7 days of incubation were comparable to the control group and higher than the chlorhexidine group. The cell activity in glucanhydrolase groups paralleled with the increased cell number by attachment and proliferation. According to these results, Lipomyces starkeyj KSM 22 glucanhydrolase has little harmful effect on attachment and proliferation of human gingival fibroblasts, in contrast to 0.1% chlorhexidine which was cytotoxic to human gingival fibroblasts. Therefore this glucanhydrolase preparation is considered as a safe and promising agent for new mouthwash formula in the near future.