• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.11a
• /
• pp.57-60
• /
• 2006

This study proposes the physical properties of the hardened lightweight cement using the polyethylene tube and to make the fundamental data regarding a new lightweight concrete development. The aerated concrete is displaying various effects such as lightweight, insulation characteristic and it is coming to be widely applied the slab layer of apartment as an insulating material but currently the aerated concrete has many problems. Therefore, demonstrating similar property of former aerated concrete and improving the defects, developing new hardened cement is needed. In this study, we predict adopting possibility of hollow core polyethylene tube, as a material to make cement hardening containing a lot of void. So we changed the mixing ratio, a diameter and length of the polyethylene tube and improved the compressive strength and unit capacity weight of the lightweight cement hardening body. From the test results, we judge that the aerated concrete is a developmental possibility.

• Korean Journal of Metals and Materials
• /
• v.47 no.6
• /
• pp.331-337
• /
• 2009

To lower the annealing temperature and the deviation of the mechanical properties of bake hardening steels, high purity steels were investigated. The steels were characterized by treating at low recrystallization temperature. It was confirmed that the strengthening originated from the solid solution of carbon and the ferrite grain refinement by fine MnS precipitates as carbon and sulfur contents increased in high purity steels. However, it was observed that there was no more increase of strength in steels containing over 40 ppm of carbon. It was considered that the excess carbon formed either the carbon cluster or the low temperature unstable carbides which had the negligible effect on the strengthening because they were reported to be highly coherent with the matrix. The carbon cluster and unstable carbides could be transformed to the stable cementite during bake hardening treatment. MnS was not observed in the high purity steel containing 5 ppm S, resulting in very coarse recrystallized grains and good ductility. As sulfur content increased, the recrystallized grain size decreased due to the formation of the fine MnS precipitates.

• Steel and Composite Structures
• /
• v.47 no.2
• /
• pp.289-296
• /
• 2023

The failure of a thin-walled tube was studied in this paper based on three failure models. Both proportional and non-proportional loading paths were applied. Proportional loading consisted of combined tension-torsion. Cyclic non-proportional loading was also applied. It was a circular out-of-phase axial-shear stress loading path. The third loading path was a combination of a constant internal pressure and a bending moment. The failure models under study were equivalent plastic strain, modified Mohr-Coulomb (Bai-Wierzbicki) and Tearing parameter models. The elasto-plastic analysis was conducted using J2 criterion and nonlinear kinematic hardening. The return mapping algorithm was employed to numerically solve the plastic flow relations. The effects of the hydrostatic stress on the plastic flow and the stress triaxiality parameter on the failure were discussed. Each failure model under study was utilized to predict failure. The failure loads obtained from each model were compared with each other. The equivalent plastic strain model was independent from the stress triaxiality parameter, and it predicted the highest failure load in the bending problem. The modified Mohr-Coulomb failure model predicted the lowest failure load for the range of the stress triaxiality parameter and Lode's angle.

• Steel and Composite Structures
• /
• v.21 no.5
• /
• pp.1121-1144
• /
• 2016

This paper presents a displacement-based finite element procedure for second-order distributed plasticity analysis of planar steel frames with semi-rigid beam-to-column connections under static loadings. A partially strain-hardening elastic-plastic beam-column element, which directly takes into account geometric nonlinearity, gradual yielding of material, and flexibility of semi-rigid connections, is proposed. The second-order effects and distributed plasticity are considered by dividing the member into several sub-elements and meshing the cross-section into several fibers. A new nonlinear solution procedure based on the combination of the Newton-Raphson equilibrium iterative algorithm and the constant work method for adjusting the incremental load factor is proposed for solving nonlinear equilibrium equations. The nonlinear inelastic behavior predicted by the proposed program compares well with previous studies. Coupling effects of three primary sources of nonlinearity, geometric imperfections, and residual stress are investigated and discussed in this paper.

• Transactions of Materials Processing
• /
• v.11 no.5
• /
• pp.457-464
• /
• 2002

A finite element inverse analysis is utilized to consider forming effects of an S-rail on the assessment of the crashworthiness with small amount of computation time. A crash analysis can be directly performed after the inverse simulation of a forming process without a smoothing or remeshing scheme. The direct mesh mapping method is used to calculate an initial guess from a sliding constraint surface that is extracted from the die and punch set. Analysis results demonstrate that energy absorption of structures is increased when simulation considers forming effects of thickness variation and work hardening. The finite element inverse analysis is proved to be an effective tool in consideration of forming effects for the crash analysis.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1995.10a
• /
• pp.258-265
• /
• 1995

For design of seismic isolated system the determination of isolated frequency is very important. In this paper the effects of seismic isolated frequency for cylindrical tank are investigated using the 1940 EL Centre earthquake(NS). From the results of analysis the seismic isolated frequencies significantly depend on input acceleration and displacement components in lower frequency regions. Therefore, the seismic isolated frequency should be determined by consideration of input ground motion characteristics. For the seismic analysis the modified hysteretic hi-linear model of seismic isolators which can consider the yield load variation, shape of hysterisis loop variation and hardening effects of isolators is proposed. The analyses using the proposed model give similar displacement responses but higher maximum acceleration responses than those using the simple hysteretic hi-linear model.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.711-714
• /
• 2004

The setting and hardening of concrete is accompanied with nonlinear temperature distribution caused by development of hydration heat of cement. In order to predict the exact temperature history in concrete structures it is required to examine thermal properties of concrete. In this study, the coefficient of air convection, which presents thermal transfer between surface of concrete and air, was experimentally investigated with variables such as velocity of wind, boiling and layer effects. Finally, the prediction model for equivalent coefficient of air convection was theoretically proposed. The coefficient of air convection in the proposed model increases with velocity of wind, and its dependance on wind velocity is varied with types of form. For determining the initial coefficient of air convection, boiling effects must be considered. The coefficient of air convection is affected by boundary layer with respect to the distance from the surface.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.5
• /
• pp.182-189
• /
• 2002

This paper is concerned with a collapse behavior analysis for a thin-walled structure considering farming effects. Numerical simulation is carried out with a finite element limit analysis in order to identify forming effects on collapse behavior of a thin-walled structure such as an S-rail. The formed S-rail contains fabrication histories such as residual stress, work hardening, non-uniform thickness distribution and geometric changes resulted from the forming process. The collapse behavior analysis of an S-rail with forming effects leads to different results from that without such effects. The present study deals with the collapse analysis of the S-rail fabricated with the typical forming, trimming and springback processes. Collapse properties such as the collapse load, the collapse mode and the energy absorption are calculated and investigated In order to identify forming effects. It is fully demonstrated that the design of thin-walled structures needs to consider the forming effects for a proper assessment of the load-carrying capacity and the deformation of the formed structures.

• Korean Journal of Materials Research
• /
• v.9 no.2
• /
• pp.188-194
• /
• 1999

To investigate the effect of niobium and tin on the mechanical properties of zirconium alloys, the tensile test and the microstructural analysis were performed on the Zr-based binary(Zr-xNb, Zr-xSn) and ternary(Zr-0.8Sn-xNb, Zr-0.4Nb-xSn) alloys. As the content of Nb or Sn element increased, the strengths of the Zr-based alloys tended to gradually increase. The increase of mechanical strength was remarkable strength was remarkable in the range more than the solubility of Nb and Sn. The strengthening effects were discussed on the basis of the solid solution hardening, the precipitate hardening, the grain size effect, and the texture effect. The mechanical strength is mainly controlled by the solid solution hardening and additionally by the precipitate hardening in the content more than solubility limit of Nb and Sn. The grain refinement also has a slight effect on the strength of the zirconium alloys with the addition of Nb and Sn. However, the texture effect can be excluded due to the same Kearns number regardless of the content of alloying elements.

• Korean Journal of Food Science and Technology
• /
• v.27 no.2
• /
• pp.205-209
• /
• 1995

Edible hardened soybean oil is processed by hydrogenation of refined soybean oil in order to upgrade the heat and oxidation stability and to improve flavor and physical nature. This study aims to investigate the influences of various reaction conditions on iodine value, fatty acid composition and trans isomer formation in hydrogenating soybean oil. In case that hardening temperature is $180^{\circ}C$, trans acid formation increased by 6.2 times more under $3.0{\;}kg/cm^{2}H_{2}$ than under $0.5{\;}kg/cm^{2}H_{2}$, while linolenic acid decreased in contents. In case of $200^{\circ}C$ of hardening temperature trans acid formation showed 4.6% higher under $0.5{\;}kg/cm^{2}H_{2}$ than under $3.0{\;}kg/cm^{2}H_{2}$ while contents of linolenic and linoleic acids showed 0.51% and 2.5% lower respectively. It is concluded that $200^{\circ}C$ of hardening temperature under 0.5 and $3.0{\;}kg/cm^{2}H_{2}$ is better condition because trans isomers are little produced, and iodine value and linolenic acid content decreased in hardening soybean oil.