• Advances in nano research
• /
• 제16권5호
• /
• pp.435-444
• /
• 2024

Microscopic defects within the microstructure of hardened cement paste are the main source of weakness in concrete. As a solution, nano-graphene oxide (GO) can be employed to improve the cement paste microstructure. However, there is a number of disadvantages, e.g., fluidity reduction and non-uniform dispersion. The present study sought to modify GO by fabricating a copolymer (PSGO) in a novel process to exploit the advantages of nano-GO while minimizing its disadvantages. Using 0.03wt% copolymerled to 38.8% higher tensile strength, 29.3% higher compressive strength and 25% higher workability. The SEM images revealed that GO and modified GO enhanced concrete by secondary hydration and bonding with C-S-H, creating a firm, integrated, and foil-like structure, and reducing the crack size and depth.

• 콘크리트학회지
• /
• 제6권5호
• /
• pp.149-157
• /
• 1994

보통 포틀랜드 시멘트와 수용성 고분자 물질인 hydroxy propyl methyl cellulose(HPMC), 미세골재 및 혼화재료를 사용하여 W/C=0.1이 되도록 물을 첨가하고 twin roll mill로 혼합 성형한 후 60일간 양생하여 고강도 시멘트 경화체를 제조하였다. 이 경화체에 대한 휨강도 및 파괴인성을 검토하였다. SiC 분말 및 백색시멘트를 첨가한 경우 휨강도는 약 100MPa정도, 탄성계수는 80-95GPa의 값을 나타내었다. 실리카흄을 첨가한 경우 휨강도는 80MPa, 탄성계수는 60GPa의 값을 나타내었다.

• 한국세라믹학회지
• /
• 제37권5호
• /
• pp.438-443
• /
• 2000

This dissertation is focused on the study over the improvement for the early strength of belite-rich cement(BRC). For this purpose, the initial hydration behaviors according to addition of different calcium sulfate types were evaluated. From the observations by XRD, DSC and SEM, the BRC II and III with the addition of natural anhydrate and flue gas desulphurization(FGD) gypsum, respectively, formed much ettringite after 7 days more than the BRC I with the addition of chemical gypsum. The compressive strength of the BRC II and III developed outstandingly due to the formation of calcium aluminate hydrate within pores of hardened BRC paste. Especially, in the case of BRC III adding FGD with low impurities, the early as well as long term compressive strengths were shown very high, compared with other specimens.

• Computers and Concrete
• /
• 제32권2호
• /
• pp.185-206
• /
• 2023

This article aimed to explore the optimization of mineral admixtures and retarding admixture for high-performance concrete. In essence, fresh concrete can be regarded as a mixture in which both coarse and fine aggregates are suspended in a cement-based matrix paste. Based on this view, the test procedure was divided into three progressive stages of binder paste, mortar, and concrete to explore their rheological behavior and mechanical properties respectively. At each stage, there were four experimental control factors, and each factor had three levels. In order to reduce the workload of the experiment, the Taguchi method with an L9(3⁴) orthogonal array and four controllable three-level factors was adopted. The test results show that the use of the Taguchi method effectively optimized the composition of high-performance concrete. The slump of the prepared concrete was above 18 cm, and the slump flow was above 50 cm, indicating that it had good workability. On the other hand, the 28-day compressive strength of the hardened concretes was between 31.3-59.8 MPa. Furthermore, the analysis of variance (ANOVA) results showed that the most significant factor affecting the initial setting time of the fresh concretes was the retarder dosage, and its contribution percentage was 62.66%. On the other hand, the ANOVA results show that the most significant factor affecting the 28-day compressive strength of the hardened concretes was the water to binder ratio, and its contribution percentage was 79.05%.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.945-950
• /
• 2000

Coastal concrete structure is harmed by physical and chemical action of sea water, impact load, meteorological effect and etc. especially, premature reinforcement corrosion in concrete exposed to sea water has an important problem. In this study, the behavior of chloride ions penetrated through the coastal concrete structure with ordinary portland cement or ground granulated blast furnace slag(GGBFS) was modeled. The physicochemical processes including the diffusion of chloride and the chemical reaction of chloride ion with calcium silicate hydrate and the other constituents of hardened cement paste such as$C_3A$ and $C_4AF$were analyzed by using the Finite Element Method. From analysis result, the corrosion of concrete structure with GGBFS begins 1.69~1.76 times later than that of concrete structure with ordinary portland cement.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 봄 학술발표회 논문집
• /
• pp.163-168
• /
• 1994

If the concrete is exposed below freezing point of the outer temperature before hardened, the quality of the concrete will be lowered after hardened. Anti-freezing agent which doesn't corrode the steel bar and doesn't generate the alkali-aggregate reaction by noncholride recently developed in Japan and Northern Europe. But the effects of these agents are rarely known. Therefore, this study is desigend for analyzing the freezing properties at the condition of solution of solution and cement paste. And this study aims to present the reference data for practical use of the concrete works using anti-freezing agent.

• 한국세라믹학회지
• /
• 제52권6호
• /
• pp.483-488
• /
• 2015

Blast furnace slag(BFS) is well known for its hardening mechanism in ordinary Portland cement with alkali activation due to its latent hydraulic property. The possibility of using calcium compound as activator for BFS has been investigated in this study. The hydration properties of calcium compound activated BFS binders were explored using heat of hydration, powder X-ray diffraction and compressive strength testing. Heat of hydration results indicate that the hydration heat of BFS is lower than OPC paste by about 50%. And ettringite as hydration product was formed continuously as the calcium sulfate was decreased. The maximum compressive strength of hardened BFS mortar at 28 days is confirmed to be 83% as compared with hardened OPC mortar.

• 콘크리트학회논문집
• /
• 제16권5호
• /
• pp.597-604
• /
• 2004

본 연구는 실리카퓸을 사용한 고강도 콘크리트의 고온하의 압축강도의 저하 및 공극률 변화를 통하여 강도 감소와 공극구조와의 연관성을 검토하였다. 또한, 실리카퓸 혼입의 유무와 각 가열온도에서의 시멘트 수화물의 탈수에 의한 공극특성의 변화에 관한 기초 데이터를 제공하고자 하였다. 연구결과, 실리카퓸의 혼입에 따른 필러효과 및 물-결합재비의 차로 인해 공극률 및 공극분포는 다르게 나타났다. 가열온도가 상승함에 따라 공극률도 점진적으로 증가하는 경향을 보였다. 또한, $600^{\circ}C$ 이상의 고온에서의 경향성은 더욱 현저하였다. 가열온도의 상승에 따라 $0.1{\~}0.5{\mu}m$공극의 증가는 현저하였으며 이는 모세관 공극의 수분의 증발 및 C-S-H계 수화물 및 수산화칼슘이 분해되어 결합수가 탈수한 결과이다. 고열에 의한 신축도 콘크리트 내부의 미세균열을 발생시켜 공극률 증가를 유발한다. 이러한 공극률 증가는 가열온도에 따라 일정한 경향성을 띠므로 화해를 입은 콘크리트의 수열온도 및 국부적인 성능저하를 예측할 수 있을 것으로 기대된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.211-214
• /
• 2005

Recently, Deterioration of the concrete sewer concrete structures by biochemical corrosion has been issued and a development of the inhibition system of corrosion that has been demanded. The sulfuric acid may react with the hardened cement paste and originate expansive products which can induce swelling and breakless of concrete. Also, a sulphuric acid reacts with calcium hydroxide to from $CaSO_4\;\cdot\;2H_2O$. This reaction accounts for consumption of the calcium hydroxide present in hardened cement paste. In this study, To present from biochemical corrosion of the sewer repair mortar that was spread with liquefied antibiotic and then its experimental properties were experimentally investigated and to estimate the effect of absorbed condition of restorative mortar, the number of coating times and coating contents with antibiotic on the durability properties of restorative mortar spread with antibiotics. Also, testing items such as carbonation depth, choloride ion penetration depth and chemical resistance was tested to estimate the durability properties in third study. In results, the novellus bacillus inhabiting in sewer concrete structures was restrained by antibiotics developed in this study. And carbonation depth, choloride ion penetration depth and chemical resistance of restorative mortar spread with antibiotics was superior to that of plain mortar.

• 콘크리트학회논문집
• /
• 제20권1호
• /
• pp.109-116
• /
• 2008

본 연구는 시멘트계의 self-healing 반응에 대한 정보와 콘크리트용 구체방수재가 self-healing에 미치는 영향에 대한 정보를 얻기 위하여 수행되었다. 우선 시멘트페이스트를 준비하여 7, 14, 28일간 양생한 다음 분쇄하여 두께가 1 mm 이하인 시편을 분리하였다. 분리한 시편은 밑면과 윗면을 젖은 헝겊으로 감싼 다음 용기에 담아 7일, 28일간 보관하였다. 그 후 젖은 헝겊으로 덮어 두었던 시편을 대상으로 아세톤을 사용하여 수화 정지 작업을 한 다음 XRD, DSC, SEM, EDX를 사용하여 분석하였다. 이러한 분석 결과 시멘트의 self-healing에 대한 정보를 얻을 수 있었다. 시멘트는 self-healing의 특성을 가지고 있으며 이러한 현상은 물의 존재에 큰 영향을 받게 된다. 또한 self-healing은 수화 초기에 더욱 빠르고 효과적인데, 이는 수화 초기 일수록 미반응 시멘트 성분의 함량이 높아 추가적인 수화반응을 일으키기가 수월하기 때문이다. 또한 연구 결과 콘크리트용 구체방수재가 시멘트계의 self-healing에 상당한 영향을 미치는 것을 확인하였다. 구체방수재는 시멘트의 self-healing 효과를 증대시켜주며, 특히 C 구체방수재를 사용한 시편에서는 침상 또는 섬유상의 수화생성물이 다량 존재하는 것으로 나타났으며, 이들 상은 에트린자이트로 예상되어진다. 이들 수화생성물이 시멘트계의 self-healing 효과를 증진하는데 매우 효과적인 것으로 판단된다.