• Transactions of Materials Processing
• /
• v.13 no.1
• /
• pp.45-52
• /
• 2004

This research conducted milling tests to study effects of cutting environment conditions of ball end mills on the characteristics of hard milling process. KP4 steels and STD11 heat treated steels were used as the workpiece and WC-Co ball end mill tools with TiAlN coated were utilized in the cutting tests. Dry cutting without coolant and semi-dry cutting using botanical oil coolant were conducted and MQL(Minimum Quantity Lubricant) device was used to spray coolant. Cutting forces, tool wear and surface roughness were measured in the cutting tests. Results showed that dry cutting of KP4 and hardened STD11 specimens produced better surface quality and wear performance than MQL spray cutting did.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.313-318
• /
• 1997

Air voids existed in hardened concrete have an important influence on concrete deterioration such as carbonation, freezing and thawing, and corrosion of embedded steel in concrete. Therefore it is very significant to investigate the pore structure of system (size, number and continuity of air voids) to solve the reason caused concrete deterioration. The purpose of this study is to develop th standard method of measuring air voids which affect properties in hardened concrete using image analyzing system. This paper presents the settlement of rapid and exact experimental method which extracts fine bubbles, calculates the number of air voids, and determines air-voids distributions using image analyzing system with computer.

• Structural Engineering and Mechanics
• /
• v.65 no.3
• /
• pp.243-250
• /
• 2018

The use of blast hardened bulkheads (BHBs) is an effective vulnerability hardening technique for improving the survivability of naval warships when internal explosions occur due to being shot by an anti-surface missile. In this paper, a new concept of BHBs reinforced by aluminum (Al) foam is proposed. The new concept can significantly reduce the blast pressures transferred to bulkheads and, unlike conventional BHBs, can be easily installed to operating naval warships. Chamber model blast tests were performed to demonstrate the effectiveness of the Al-foam BHBs and the results are further supported by numerical simulations. Finally, a practical preliminary is proposed for the Al-foam BHBs.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.238-244
• /
• 2004

This research conducted milling tests to study effects of cutting environment conditions of ball end milts on the characteristics of high speed milling cutting process. KP4 steels and STD11 heat treated steels were used as the workpiece and WC-Co ball end mill tools with TiAIN coated were utilized in the cutting tests. Dry cutting without coolant and semidry cutting using botanical oil coolant by the MQL(Minimum Quantity Lubricant) device were conducted. Cutting forces, tool wear and surface roughness were measured in the cutting tests. Results showed that MQL spray cutting of KP4 and hardened STD11 specimens produced better surface quality and wear performance than dry cutting did.

• Journal of the Korean Chemical Society
• /
• v.9 no.4
• /
• pp.190-200
• /
• 1965

It is a fundamental study for the hardened bodies of $CaO-SiO_2-H_2O$ system to clear up various physical properties and structures of the products, using the Seosan quartz and $Ca(OH)_2$(C. P. grade) as raw materials. Various samples were obtained by varying $CaO/SiO_2$ mole ratio (0.3∼2.1) and hydrothermal conditions ($100∼220^{\circ}C$ and 2∼14hr.) within the given limit. It was found that tobermorite phase as hydrate is contained in the hardened bodies and that the development of crystal has a great influence on the strengths and other physical properties of hardened bodies.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.116-117
• /
• 2018

The aim of this study is to investigate the properties of hardened mortar with chlorine by-pass system(CBS) in cement production in blast furnace slag(BS) mixed cement. Compressive strength had a tendency to be increased when the CBS Dust was replaced by 10% at the BS replacement rate of 0%. The 65% combination of BS showed a tendency to decrease as the CBS Dust exchange rate increases. Flexural strength was reduced as CBS Dust exchange rate increases in BS replacement ratio of 0%. The use of 5% of CBS dust can contribute to enhance the quality of non reinforced concrete.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.6
• /
• pp.551-555
• /
• 2014

In this paper, framework of weapon effects calculator for hardened targets is presented. Fast running time, validation and easy expandibility are required for weaponeering tools, and these requirements were met by using of physics-based fast-running models or semi-empirical equations for damage prediction and penetrations, and modular architecture. Key concepts and outputs, required functions and corresponding use cases were presented.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.6
• /
• pp.83-87
• /
• 2005

Hardening Constant Velocity joint increases hardness near the surface and the surface improves fatigue life. Although case depth and chemical composition are same, the prior structure of induction hardened Constant Velocity Joint affects the fatigue strength and life during hardening. Therefore torsional fatigue tests of specimens from vaere conducted on induction hardened automotive Constant Velocity joint with various case depths and lrious prior structures, which are obtained by nomalizing, spheriodized annealing and tempering after quenching, woads applied in order to evaluate the relation between prior structure and fatigue strength.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.113-114
• /
• 2017

In this study, the change of composition of cement hardened at high temperature through XRD was observed. The specimen was made of cement paste and the heating rate condition was applied at rapid thermal annealing (10.0℃ / min). The decrease of calcium hydroxide was not confirmed, but the calcium carbonate tended to be impossible or decreased after 800℃. Calcium silicate and larnite were observed to increase with increasing temperature. It is considered that silicic acid, which is a stable structure due to the decomposition of calcium silicate, is changed into a phase such as lime.

• Journal of the Korean Ceramic Society
• /
• v.27 no.5
• /
• pp.589-596
• /
• 1990

In this study, the freezing and thawing resistance in sea-water of hardened cement paste was investigated by adding slag, diatomaceous earth and fly ash as blending materials and air entraining agent and superplasticizer as admixtures to the cement paste. The structure of hardened cement pate was densified by potential hydraulic properties and pozzolan reactivities of materials and the freezing and thawing resistance of the paste was improved with the effect blending materials and admixtures. As the blending materials were added to the paste, the quantity of C3A was relatively reduced and the formation of expansive ettringite was suppressed to decrease the penetration of sea-water or Cl-, SO42-ion, and then freeze-thaw resistance was enhanced. Particulary, when 40% of slag was mixed, the resistance was excellent.