• 대한기계학회논문집A
• /
• 제39권12호
• /
• pp.1297-1303
• /
• 2015

장축의 내부 크롬도금은 크롬산 용액에 황산을 촉매로 경질의 후막 도금층을 형성시키는 기술로서 산업뿐만 아니라 군사적 목적으로도 널리 사용되고 있다. 대구경의 포신내부에 경질크롬도금을 처리하면 강성과 내마성을 증대시켜 고압의 폭발력에 견딜 수 있다. 탄자의 높은 운동에너지와 탄 폭발로 생긴 고압력에 의해 포신 내부의 크롬도금층이 탈락되는 문제가 있어 도금 공정 전반에 걸친 검토가 이루어졌다. 크롬도금은 탈지, 수세, 전해연마, 에칭, 도금, 수세 및 수소취성제거 등 여러 공정으로 이루어진다. 크롬도금 탈락은 도금의 밀착성과 연관이 있으며, 그 중에 전해연마액의 Fe 농도가 도금 밀착성에 영향을 미치는 것으로 나타났다. 도금부위의 요철상태를 SEM으로 조사하여 도금탈락을 방지할 수 있는 최적의 Fe 농도를 설정하고, 밀착성 시험 등으로 그 효과를 입증하였다.

• 한국축산식품학회지
• /
• 제25권4호
• /
• pp.423-429
• /
• 2005

돈육을 수세하여 돈육 수리미를 제조할 때, 사후 해당 속도가 빠른 돈육을 원료육으로 이용하면 낮은 pH에 기인하여 보수성이 낮은 결과 적은 수분 함량을 보유하는 돈육 수세물을 획득하게 되어 수율이 낮아졌다. 사후 해당 속도가 빠른 돈육은 정상 돈육에 비해 육단백질의 변성이 유발되어 수분 함량이 낮고 치밀한 젤 매트릭스를 형성하여 경도가 높지만 탄력성이 낮은 돈육 수리미를 생산하였다. 뿐만 아니라 사후 해당 속도가 빠른 돈육은 변성된 근장 단백질이 근원섬유 단백질과 결합하여 수세되지 않고 돈육 수세물 내에 잔존하게 되어 돈육 수리미의 색깔을 어둡게 만드는 원인으로 작용한 것으로 사료된다.

• 한국세라믹학회지
• /
• 제40권8호
• /
• pp.798-803
• /
• 2003

In synthesis of nano powders, the hard agglomeration for the synthesized powders occurred during the drying processing. In order to avoid hard agglomeration in particles the freeze drying process was used in this experiment. e fabricated the Yttira-Doped Ceria(YDC) nano powder by co-precipitation. Starting materials used in experiments were the cerium(III) nitrate and yttrium(III) nitrate solution with 야-water, which two solutions were mixed and then the precipitated hydroxides were prepared for adding sodium hydroxide. The co-precipitated powders were dried by the thermal drying at 8$0^{\circ}C$ for 24 h and by freeze drying at -4$0^{\circ}C$, 30 mtorr for 72 h. The lattice parameter and crystallite size as a function of calcination temperature was characterized by XRD analysis. The lattice parameter of YDC was decreased with addition amount of yttrium and was estimated as 5.401683 $\AA$ at $700^{\circ}C$. Crystallite size were calculated by XRD-LB method, and morphologies were confirmed with the observation of TEM and SEM. The freeze dried YDC powders had medium diameter of 17 nm with more uniform size distribution than the thermal dried YDC posers, which were mainly ascribed to the difference of agglomerates formation during drying stage.

• Restorative Dentistry and Endodontics
• /
• 제10권1호
• /
• pp.161-168
• /
• 1984

The purpose of this study was to examine the effect of heat generated by rotating bur on the dental hard tissue in vitro. Freshly extracted molar teeth with normal appearance from early 20's male were collected and experimental teeth were divided into 4 groups and the teeth in each group were prepared class I cavity with different clinical procedures as follows. The four methods were. I. 20,000rpm without coolant II. 20,000rpm with coolant III. 500,000rpm without coolant IV. 500,000rpm with coolant Five teeth were reserved intact as a control group. These teeth were longitudinally split into two parts by means of chisel after class I cavity preparation. In a control group 5 parts were boiled in water for 20 minutes and the other 5 specimens were not boiled. All specimens were immersed in 2% methylene blue dye solution and the image of dye penetration was examined and photographed under stereomicroscope. Followings were the results obtained through the study. 1. In control group, dye penetration of the unboiled specimens was increased than with the boiled group. 2. The specimens prepared cavity without coolant showed decreased dye penetration than with the coolant group. 3. 20,000rpm without coolant group showed the least dye penetration. 4. 500,000rpm with coolant group showed similar level of dye penetration to the unboiled specimens from the control group.

• Structural Engineering and Mechanics
• /
• 제8권1호
• /
• pp.39-51
• /
• 1999

The dynamic response of buried pipelines has gained considerable importance because these pipelines perform vital role in conducting energy, water, communication and transportation. After realizing the magnitude of damage, and hence, the human uncomfort and the economical losses, researchers have paid sincere attention to this problem. A number of papers have appeared in the past which discuss the different aspects of the problem. This paper presents a theoretical analysis of non-axisymmetric dynamic response of buried orthotropic cylindrical shell subjected to a moving load along the axis of the shell. The orthotropic shell has been buried in a homogeneous, isotropic and elastic medium of infinite extent. A thick shell theory including the effects of rotary inertia and shear deformation has been used. A perfect bond between the shell and the surrounding medium has been assumed. Results have been obtained for very hard (rocky), medium hard and soft soil surrounding the shell. The effects of shell orthotropy have been brought out by varying the non-dimensional orthotropic parameters over a long range. Under these conditions the shell response is studied in axisymmetric mode as well as in the flexural mode. It is observed that the shell response is significantly affected by change in orthotropic parameters and also due to change of response mode. It is observed that axial deformation is large in axisymmetric mode as compared to that in flexural mode.

• 터널과지하공간
• /
• 제6권3호
• /
• pp.197-208
• /
• 1996

Due to the constraints in pre site-investigation for tunnel, it is essential to redesign the support structures suitable for rock mass conditions such as rock strength, ground water and discontinuity conditions for safe tunnel construction. For the selection of optimum support, it is very important to carry out the rock mass classification and in-situ measurement in tunnelling. In this paper, in a mountain tunnel designed by NATM in hard rock, the selectable system for optimum support has been studied. The tunnel is situated at Chun-an in Kyungbu highspeed railway line with 2 lanes over a length of 4, 020 m and a diameter of 15 m. The tunnel was constructed by drill & blasting method and long bench cut method, designed five types of standard support patterns according to rock mass conditions. In this tunnel, face mapping based on image processing of tunnel face and rock mass classification by RMR carried out for the quantitative evaluation of the characteristics of rock mass and compared with rock mass classes in design. Also, in-situ measurement of convergence and crown settlement conducted about 30 m interval, assessed the stability of tunnel from the analysis of monitoring data. Through the results of rock mass classification and in-situ measurement in several sections, the design of supports were modified for the safe and economic tunnelling.

• 대한화장품학회지
• /
• 제23권3호
• /
• pp.128-133
• /
• 1997

In manufacturing emulsion lipstick in the past, heat and emulsifyoil phase made with oil, wax and lipophilic emulsifier with water phase together; and then mold above-mentioned materials, so-called lipophilic emulsified lipstick production method has been used. However it is hard to manufacture products using the above said method and furthermore, weak in moisturizing effect, lip care and stability. In this paper, I will discuss about multi-emulsion lipstick complementing already existing emulsion lipstick in terms of stability, giving moisturing effect of lip, and outstanding protection effectiveness of skin by safely gelatinating the state between amphiphilic lipid and water in stable.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1306-1312
• /
• 2011

Underground Subway station's air pollutants are introduced from the indoor or outdoor. And Radon is a major pollutant in the subway station. Radioactive substances Radon is occuring naturally in granite tunnel wall and underground water. Especially inert gas Radon that causes lung cancer in human is anywhere but 5678 S.M.R.T. tunnels deep and pass through the granite plaque have a lot of Radon. The Radon concentration is determined by the following reasons : radon content of soil and concrete, underground water, ventilation, pressure difference, building structure, temperature, etc. So Radon concentration is hard to predict. And we can't only ventilate owing to era of high oil prices. This study focuses on our efforts for the reduction of Radon concentration. And the purpose is to provide basically datas of specially managed 15 subway station's Radon concentration.

• 한국물환경학회지
• /
• 제28권4호
• /
• pp.601-607
• /
• 2012

Advance countries are trying hard to acquire intellectual properties on the technologies for prior occupation in the future industry. Patent contains meaningful technical achievement. Patent map is required to propose the strategies for efficient development and use of these technologies. In this paper, analysis of foreign and domestic patents for groundwater pollution technologies analysis. It was analyzed by utilizing two processes of patent map and paper analysis. The patents in Korea, USA, Japan, China, and Europe were searched. It was found that the number of patent for groundwater pollution was USA patent 44.3%, Japan patent 17.1%, China 13.3%, EU 1.9% and Korea patent 23.3%, respectively.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1997년도 춘계학술대회
• /
• pp.118-118
• /
• 1997

Solid dispersions were used to increase the dissolution rate of biphenyl dimethyl dicarboxylate (DDB) in water, with the ultimate goal of optimizing its bioavailability when incoporated into pharmaceuticals. Carriers used were Kollidon 30, Kollidon VA 64, 2-hydroxypropyl-${\beta}$-cyclodextrin (HPCD), sodium salicylate or sodium benzoate. DDB solid dispersions were prepared at drug to carrier proportions ranging from 1 : 5 to 1 : 20 (w/w) by solvent evaporation method. DDB tablets (7.5 mg) were prepared by compressing the powder mixture composed of solid dispersions, lactose, corn starch, crospovidone and magnesium stearate using a single-punch press. DDB capsules (7.5 mg) were prepared by filing the mixture into empty hard gelatin capsules (size #1). Dissolution studies of DDB from powdered solid dispersions, tablets and capsules were performed in 900 $m\ell$ of water at 100 rpm and 37$^{\circ}C$ by the paddle method. The dissolved amount was assayed by HPLC and expressed as the mean(%)of three determinations.