• 지능정보연구
• /
• 제25권3호
• /
• pp.117-140
• /
• 2019

고령화 현상이 가속화되고, 취약계층 노인과 관련된 다양한 사회문제가 제기됨에 따라 노인세대의 건강과 안전을 보호하기 위한 효과적인 노인 돌봄 솔루션의 필요성이 커지고 있다. 최근에는 노인 돌봄의 수단으로 첨단화된 ICT 기술을 탑재한 스마트 토이를 활용하고자 하는 사례가 늘고 있다. 특히 스마트 토이를 통해 기록되는 노인 행태에 대한 로그 데이터는 노인 돌봄 관련 정책 수립, 노인 돌봄 서비스 컨셉 기획 및 개발과 같은 분야에 정량적이고 객관적인 설명지표로써 활용 가치가 높을 것으로 전망된다. 그러나 현재까지 노인 돌봄 스마트 토이와 관련된 연구 중 스마트 토이를 통해 기록된 사용자 행동 로그에 주목하여 이를 의사결정에 활용하고자 하는 연구는 부족한 실정이다. 본 연구는 기존에 충분히 논의되지 않았던 스마트 토이 사용자 행동 로그 데이터에 대한 분석을 중심으로, 노인 돌봄 솔루션의 사용자 경험 증진을 위한 효과적인 인사이트를 도출하는 것을 목적으로 한다. 구체적으로 사용자 프로파일링 기반 행태 분석과 사용 행태에 따른 삶의 질 변화 메커니즘 도출을 단계적으로 수행하였다. 분석 결과, 5개의 노인 생활관리 요인으로부터 노인집단 유형을 분류할 수 있는 2개의 중요한 차원을 도출하였으며, 도출한 차원에 근거하여 전체 노인 사용자를 3개의 유형으로 분류하고 유형별 스마트 토이 사용 행태 차이를 프로파일링 분석을 통해 확인할 수 있었다. 이후 스마트 토이 사용 행태에 따른 삶의 질 변화 메커니즘을 도출하기 위한 단계적 회귀분석을 수행하였으며, 스마트 토이와의 상호작용, 스마트 토이의 콘텐츠 사용, 스마트 토이가 관찰한 노인의 가정 내 활동 정도가 노인의 우울감 개선과 생활패턴 개선에 미치는 영향 및 이를 중재하는 경로로써 스마트 토이에 대한 사용자의 성능평가와 만족감의 역할을 밝혀내었다.

• Tuberculosis and Respiratory Diseases
• /
• 제42권4호
• /
• pp.555-568
• /
• 1995

연구배경: 폐확산능은 산소를 이용하여 측정하는 것이 가장 생리적이지만 폐모세혈의 산소분압측정이 어려워 임상에서는 일산화탄소를 이용하여 측정하고 있으며, 단회호흡(single-breath)폐확산능검사법이 가장 널리 사용되고있는 방법이다. 그러나 총폐용량까지 흡기한후 10초간 숨을 참는 과정을 기침, 호흡곤란 등이 있는 환자로선 수용하기 곤란하므로 이러한 과정없이 낮은 유량의 일회호기만을 필요로 히는 호흡내(intra-breath)폐확산능검사법이 고안되었다. 본 연구에서는 단회호흡법과 호흡내법으로 측정한 폐확산능간에 유의한 차이가 있는지 그리고 차이가 있다면 어떤 인자가 영향을 미치는지를 알아보고자 하였다. 방법: 특정질환과 무관하게 임의로 73명을 선택하고 유량-용적곡선 검사를 3회 시행한후 노력성 폐활량(FVC)과 1초간 노력성호기량($FEV_1$)의 합이 가장 큰 검사에서 노력성폐활량, 1초간 노력성호기량, 1초간 노력성호기량의 노력성 폐활량에 대한 비($FEV_1$/FVC)를 구했다. 폐확산능은 5분간격으로 각각 3회씩 단회호흡법과 호흡내법으로 측정하였으며, 선형적 상관분석으로 어떤 인자가 두 방법간의 폐확산능의 차[단회호흡법과 호흡내법에 의한 각각의 폐확산능의 차이의 평균치(mL/min/mmHg)]에 영향을 미치는지를 평가하여 다음과 같은 결과를 얻었다. 결과: 1) 단회호흡법 및 호흡내법 모두 검사내 재현성은 우수하였다. 2) 단회호흡법과 호흡내법으로 측정한 폐확산능간에는 전체적으로 유의한 상관관계가 있었지만, 두 방법의 측정치간에는 의미있는 치아가 있었다($1.01{\pm}0.35ml/min/mmHg$, p<0.01). 3) 단회호흡법과 호흡내법간의 폐확산능의 차이는 노력성폐활량과는 상관관계가 없었지만, 1초간 노력성호기량, $FEV_1$/FVC 및 환기배분의 지표인 메탄농도의 기울기와는 유의한 상관관계가 있었고 다중상관분석결과 $FEV_1$/FVC에 의한 영향이 가장 컸다(r=-0.4725, p<0.01). 4) 단회호흡법과 호흡내법간의 폐확산능의 차이와 $FEV_1$/FVC를 도식화하면 두 방법간의 폐확산능의 차이는 $FEV_1$/FVC가 50~60%인 구간에서 두 군으로 분리됨을 알수 있으며, $FEV_1$/FVC가 60% 이상에서는 두방법간에 유의한 차이가 없으나($0.05{\pm}0.24ml/min/mmHg$, p>0.1) 60% 미만에서는 유의한 차이가 있었다($-4.65{\pm}0.34ml/min/mmHg$, p<0.01). 5) 메탄농도의 기울기가 정상범위인 2%/L이내에선 단회호흡법과 호흡내법의 폐확산능이 모두 $24.3{\pm}0.68ml/min/mmHg$로 측정방법에 따른 차이가 없지만 2%/L를 초과한 경우에는 단회호흡법에 의한 폐확산능이 $15.0{\pm}0.44ml/min/mmHg$ 호흡내법에 선 $11.9{\pm}0.51ml/min/mmHg$로 두 방법간에 유의한 차이가 있었다(p<0.01). 따라서 $FEV_1$/FVC가 60% 미만일때는 호흡내법으로 측정한 폐확산능이 단회호흡법보다 의미있게 낮은 값을 보이는데, 그 이유는 주로 환기배분의 장애로 추정되지만 폐확산능 이 단회호흡법에서 과대평가되거나 폐확산능의 감소가 호흡내법에서 더 예민하게 나타 났을 가능정도 배제할수 없다. 결론: 73명을 대상으로 폐확산능을 단회호흡법과 호흡내법으로 측정해본 결과 호흡내법은 검사의 재현성도 우수하고 폐기능이 정상이거나 제한성 장애, 그리고 경도의 폐쇄성장애가 있는 경우에는 단회호흡법을 대체해서 사용할수 있지만, 중등도 이상의 폐쇄성장애가 있는 경우에는 단회호흡법보다 유의하게 낮은 검사치를 보였다. 호흡내법과 단회호흡법에 의한 폐확산능의 차이가 호흡내법이 단회호흡법에 비해 폐확산능의 감소를 예민하게 나타내주는 것인지 혹은 환기의 불균형에 의한 영향을 많이 받아서인지는 연구가 더 필요할 것이다.

• 마케팅과학연구
• /
• 제18권3호
• /
• pp.59-88
• /
• 2008

Digital Convergence means integration between industry, technology, and contents, and in marketing, it usually comes with creation of new types of product and service under the base of digital technology as digitalization progress in electro-communication industries including telecommunication, home appliance, and computer industries. One can see digital convergence not only in instruments such as PC, AV appliances, cellular phone, but also in contents, network, service that are required in production, modification, distribution, re-production of information. Convergence in contents started around 1990. Convergence in network and service begins as broadcasting and telecommunication integrates and DMB(digital multimedia broadcasting), born in May, 2005 is the symbolic icon in this trend. There are some positive and negative expectations about DMB. The reason why two opposite expectations exist is that DMB does not come out from customer's need but from technology development. Therefore, customers might have hard time to interpret the real meaning of DMB. Time is quite critical to a high tech product, like DMB because another product with same function from different technology can replace the existing product within short period of time. If DMB does not positioning well to customer's mind quickly, another products like Wibro, IPTV, or HSPDA could replace it before it even spreads out. Therefore, positioning strategy is critical for success of DMB product. To make correct positioning strategy, one needs to understand how consumer interprets DMB and how consumer's interpretation can be changed via communication strategy. In this study, we try to investigate how consumer perceives a new product, like DMB and how AD strategy change consumer's perception. More specifically, the paper segment consumers into sub-groups based on their DMB perceptions and compare their characteristics in order to understand how they perceive DMB. And, expose them different printed ADs that have messages guiding consumer think DMB in specific ways, either cellular phone or personal TV. Research Question 1: Segment consumers according to perceptions about DMB and compare characteristics of segmentations. Research Question 2: Compare perceptions about DMB after AD that induces categorization of DMB in direction for each segment. If one understand and predict a direction in which consumer perceive a new product, firm can select target customers easily. We segment consumers according to their perception and analyze characteristics in order to find some variables that can influence perceptions, like prior experience, usage, or habit. And then, marketing people can use this variables to identify target customers and predict their perceptions. If one knows how customer's perception is changed via AD message, communication strategy could be constructed properly. Specially, information from segmented customers helps to develop efficient AD strategy for segment who has prior perception. Research framework consists of two measurements and one treatment, O1 X O2. First observation is for collecting information about consumer's perception and their characteristics. Based on first observation, the paper segment consumers into two groups, one group perceives DMB similar to Cellular phone and the other group perceives DMB similar to TV. And compare characteristics of two segments in order to find reason why they perceive DMB differently. Next, we expose two kinds of AD to subjects. One AD describes DMB as Cellular phone and the other Ad describes DMB as personal TV. When two ADs are exposed to subjects, consumers don't know their prior perception of DMB, in other words, which subject belongs 'similar-to-Cellular phone' segment or 'similar-to-TV' segment? However, we analyze the AD's effect differently for each segment. In research design, final observation is for investigating AD effect. Perception before AD is compared with perception after AD. Comparisons are made for each segment and for each AD. For the segment who perceives DMB similar to TV, AD that describes DMB as cellular phone could change the prior perception. And AD that describes DMB as personal TV, could enforce the prior perception. For data collection, subjects are selected from undergraduate students because they have basic knowledge about most digital equipments and have open attitude about a new product and media. Total number of subjects is 240. In order to measure perception about DMB, we use indirect measurement, comparison with other similar digital products. To select similar digital products, we pre-survey students and then finally select PDA, Car-TV, Cellular Phone, MP3 player, TV, and PSP. Quasi experiment is done at several classes under instructor's allowance. After brief introduction, prior knowledge, awareness, and usage about DMB as well as other digital instruments is asked and their similarities and perceived characteristics are measured. And then, two kinds of manipulated color-printed AD are distributed and similarities and perceived characteristics for DMB are re-measured. Finally purchase intension, AD attitude, manipulation check, and demographic variables are asked. Subjects are given small gift for participation. Stimuli are color-printed advertising. Their actual size is A4 and made after several pre-test from AD professionals and students. As results, consumers are segmented into two subgroups based on their perceptions of DMB. Similarity measure between DMB and cellular phone and similarity measure between DMB and TV are used to classify consumers. If subject whose first measure is less than the second measure, she is classified into segment A and segment A is characterized as they perceive DMB like TV. Otherwise, they are classified as segment B, who perceives DMB like cellular phone. Discriminant analysis on these groups with their characteristics of usage and attitude shows that Segment A knows much about DMB and uses a lot of digital instrument. Segment B, who thinks DMB as cellular phone doesn't know well about DMB and not familiar with other digital instruments. So, consumers with higher knowledge perceive DMB similar to TV because launching DMB advertising lead consumer think DMB as TV. Consumers with less interest on digital products don't know well about DMB AD and then think DMB as cellular phone. In order to investigate perceptions of DMB as well as other digital instruments, we apply Proxscal analysis, Multidimensional Scaling technique at SPSS statistical package. At first step, subjects are presented 21 pairs of 7 digital instruments and evaluate similarity judgments on 7 point scale. And for each segment, their similarity judgments are averaged and similarity matrix is made. Secondly, Proxscal analysis of segment A and B are done. At third stage, get similarity judgment between DMB and other digital instruments after AD exposure. Lastly, similarity judgments of group A-1, A-2, B-1, and B-2 are named as 'after DMB' and put them into matrix made at the first stage. Then apply Proxscal analysis on these matrixes and check the positional difference of DMB and after DMB. The results show that map of segment A, who perceives DMB similar as TV, shows that DMB position closer to TV than to Cellular phone as expected. Map of segment B, who perceive DMB similar as cellular phone shows that DMB position closer to Cellular phone than to TV as expected. Stress value and R-square is acceptable. And, change results after stimuli, manipulated Advertising show that AD makes DMB perception bent toward Cellular phone when Cellular phone-like AD is exposed, and that DMB positioning move towards Car-TV which is more personalized one when TV-like AD is exposed. It is true for both segment, A and B, consistently. Furthermore, the paper apply correspondence analysis to the same data and find almost the same results. The paper answers two main research questions. The first one is that perception about a new product is made mainly from prior experience. And the second one is that AD is effective in changing and enforcing perception. In addition to above, we extend perception change to purchase intention. Purchase intention is high when AD enforces original perception. AD that shows DMB like TV makes worst intention. This paper has limitations and issues to be pursed in near future. Methodologically, current methodology can't provide statistical test on the perceptual change, since classical MDS models, like Proxscal and correspondence analysis are not probability models. So, a new probability MDS model for testing hypothesis about configuration needs to be developed. Next, advertising message needs to be developed more rigorously from theoretical and managerial perspective. Also experimental procedure could be improved for more realistic data collection. For example, web-based experiment and real product stimuli and multimedia presentation could be employed. Or, one can display products together in simulated shop. In addition, demand and social desirability threats of internal validity could influence on the results. In order to handle the threats, results of the model-intended advertising and other "pseudo" advertising could be compared. Furthermore, one can try various level of innovativeness in order to check whether it make any different results (cf. Moon 2006). In addition, if one can create hypothetical product that is really innovative and new for research, it helps to make a vacant impression status and then to study how to form impression in more rigorous way.

• 한국산림과학회지
• /
• 제54권1호
• /
• pp.1-24
• /
• 1981

강원도(江原道)는 관광자원(觀光資源)이 풍부(豊富)하며 태백산맥(太白山脈)을 중심(中心)으로한 산악관광권(山岳觀光圈), 동해안(東海岸)의 해안관광권(海岸觀光圈), 내륙(內陸)의 호수관광권(湖水觀光圈)으로 구분(區分)하고 있다. 동해(東海)의 절경(絶景)을 배경(背景)으로 설악산(雪岳山)과 오태산(五台山)의 국립공원(國立公園)이 있다. 그리고 치악산(雉岳山)의 도립공원(道立公園)이 있다. 북한강상류수계(北漢江上流水系)에는 발전용(發電用)댐건설(建設)로 만수(滿水)된 인공호수(人工湖水)가 연좌(連坐)하고 있어 호수관광권(湖水觀光圈)으로 각광(脚光)을 받고 있다. 본(本) 논문(論文)에서도 강원도행정수도(江原道行政首都)이며 호반(湖畔)의 도시(都市)인 춘천(春川)을 중심(中心)으로 북한강상류수계(北漢江上流水系)에 연좌(連坐)하고 있는 호수단지주변(湖水團地周邊)의 관광자원(觀光資源)을 배경(背景)으로 하여 삼림(森林)의 풍경적시업방안(風景的施業方案)을 모색하고 있다. 본(本) 호수단지(湖水團地)는 하류(下流)로부터 상류(上流)로 향(向)하여 의암호(衣岩湖), 소양호(昭陽湖), 춘천호(春川湖), 파려호(破慮湖)가 자리잡고 있으며 이들 4개(個) 호수(湖水)의 면적(面積)은 $140.4km^2$ 총저수량(總貯水量)은 4,155백만(百萬)$m^3$이다. 그리고 발전량(發電量)은 41만(萬)KW의 시설(施設)을 갖추고 있다. 이들 호수(湖水)를 위적(囲績)하고 있는 삼림면적(森林面積)은 $1,208km^2$에 달(達)한다. 삼림(森林)은 행정적(行政的)으로 시업림(施業林)$745km^2$와 시업제한림(施業制限林) $463km^2$로 구분(區分)하고 있으며 시업제한림(施業制限林)은 개발제한구역(開發制限區域)과 자연환경보전지구내(自然環境保全地區內)에 있는 삼림(森林)과 보안림(保安林)으로 되어 있다. 개발제한구역내(開發制限區域內)에 있는 삼림(森林)은 춘천(春川)을 중심(中心)으로 반경(半徑) 10km이내(以內)에 있는 의암호주변삼림(衣岩湖周邊森林)이며 그 면적(面積)은 $177km^2$이다. 자연환경보전지구내(自然環境保全地區內)의 삼림(森林)은 소양호연안(昭陽湖沿岸)에서 2km의 가시권내(可視圈內)에 설정(設定)되어 있으며 그 면적(面積)은 $165km^2$이다. 보안림(保安林)은 각(各) 호수연안삼림(湖水沿岸森林)에 설정(設定)되어 있으며 입지적여건상(立地的與件上) 수원함양림(水源函養林)이 주종(主宗)이며 그 면적(面積)은 $121km^2$이다. 본(本) 호수단지권내(湖水團地圈內)에는 많은 각승지(各勝地)와 유원지(遊園地) 그리고 문화재(文化財)와 유적지(遺蹟地)가 있어 호수(湖水)와 삼림(森林)과 같이 귀중(貴重)한 관광자원(觀光資源)으로 부상(浮上)되고 있다. 본(本) 호수단지주변삼림(湖水團地周邊森林)은 I~II영급(令級)의 유령림(幼令林)이 전체삼림(全體森林)의 70%를 점(點)하고 있어 ha당(當)축적(蓄積)은 $15m^3$로 탐약(貪弱)하다. 침엽수림(針葉樹林), 활엽수림(濶葉樹林), 혼효림(混淆林)의 면적비율(面積比率)은 35:37:28로 활엽수림(濶葉樹林)의 면적(面積)이 약천(若千) 우위(優位)를 점(點)하고 있다. 소유형태(所有形態)는 국유림(國有林), 도유림(道有林), 군유림(郡有林), 사유림(私有林)으로 되어 있으며 그 비율(比率)은 36:14:5:45로 사유림(私有林)이 약절반(約切半)을 점(點)하고 다음이 국유림(國有林), 도유림(道有林), 군유림(郡有林)의 순(順)으로 되어 있다. 지질(地質)은 모암(母岩)이 화강암(花岡岩) 또는 편마암계(片麻岩系)로서 풍화성(風化性)이 강(强)하고 표토층(表土層)이 척박(瘠薄)함으로 임지비배문제(林地肥培問題)를 염두(念頭)에 두어야 한다. 이상(以上)의 여건(與件)을 토태(土台)로 삼림(森林)의 풍경적시업(風景的施業)의 기본방향(基本方向)을 제시(提示)하면 다음과 같다. 1) 현재(現在) 임분(林分)은 유령림(幼令林)이 대부분(大部分)이고 임지(林地)가 척박(瘠薄)함으로 임지비배(林地肥培)와 임목무육(林木撫育)에 주력(注力)하여 장령림(壯令林)의 경지(境地)로 유도(誘導)할 것. 2) 황폐성미립목지(荒廢性未立木地)와 임간라지(林間裸地)에는 속성수(速成樹)인 리기다소나무, 오리나무 등(等)은 식재(植栽)하여 조속(早速)히 피복녹화(被覆綠化) 시킬 것. 3)계곡부(溪谷部)로서 습윤(濕潤)하고 지미(地味)가 비교적(比較的) 양호(良好)한 라지(裸地)에는 잣나무, 낙엽송, 전나무 등(等)을 식재(植栽)하여 교림(喬林)으로 육성(育成)할 것. 4) 현재(現在) 사유림(私有林)의 침엽수림(針葉樹林)은 적송(赤松)이 주체(主體)가 되어 있다. 적송(赤松)은 양수(陽樹)로서 수원함양기능(水源函養機能)이 적은 위에 현재(現在) 솔잎혹파리의 피해(被害)를 입고 있어 수종갱신(樹種更新)이 불가피(不可避)하다. 그러므로 계곡부(溪谷部)부터 잣나무, 전나무, 가문비나무, 솔송나무 등(等)을 식재(植栽)하에 점차(漸次) 음성(陰性) 침엽수림(針葉樹林)으로 대체(代替)케 할 것. 5) 현재(現在) 활엽수림(濶葉樹林)은 재질면(材質面)에 있어서나 풍치면(風致面)에 있어서 가치성(價値性)이 저렬(低劣)한 잡목(雜木), 관목(灌木) 등(等)이 많으므로 점차(漸次) 이를 제거(除去)하고 참나무, 단풍나무, 물푸레나무, 자작나무, 가래나무등(等)으로 대체(代替)케 할 것. 6) 주변(周邊) 산록부(山麓部)에는 벚나무, 수양버들, 은사시나무, 후박나무, 은행나무, 향나무, 밤나무, 살구나무, 등(等)의 관상수(觀賞樹)를 조화(調和)있게 식재(殖財)할 것. 7) 활엽수림(濶葉樹林)의 갱신(更新)을 중림형(中林型)으로 유도(誘導)하여 상하이단(上下二段)의 임관형(林冠型)의 미(美)를 조성(造成)하는 구역(區域)과 왜림형(矮林型)을 조리(調利)있게 배열(配列)하는 방안(方案)을 모색할 것. 8) 침엽수림(針葉樹林)의 갱신(更新)은 택벌작업(擇伐作業) 또는 산벌작업(傘伐作業)에 의(依)해 풍치보전(風致保全)을 기(期)할 것. 9) 혼효림(混淆林)은 상목(上木)은 침엽수(針葉樹)를 하목(下木)은 활엽수(濶葉樹)로 하는 중림형(中林型)의 풍치(風致)를 보존(保存)토록 할 것. 요(要)컨대 호수(湖水)의 우아(優雅)한 여성미(女性美)와 삼림(森林)의 호장웅대(豪壯雄大)한 남성미(男性美)가 조화(調和)되어 자연(自然)의 심오(深奧)한 신비성(神秘性)을 간직하는데 역점(力點)을 두어 궁극적(窮極的)으로는 삼림(森林)을 배경(背景)으로한 호수관광권(湖水觀光圈)의 면모(面貌)를 갖추는데 초점(焦點)을 둘 것이다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.