• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.1
• /
• pp.70-86
• /
• 2015

Short crested waves play an important role for planning and design of harbours. In this context a numerical simulation is carried out to evaluate wave tranquility inside a real harbour located in east coast of India. The annual offshore wave climate proximity to harbour site is established using Wave Model (WAM) hindcast wave data. The deep water waves are transformed to harbour front using a Near Shore spectral Wave model (NSW). A directional analysis is carried out to determine the probable incident wave directions towards the harbour. Most critical threshold wave height and wave period is chosen for normal operating conditions using exceedence probability analysis. Irregular random waves from various directions are generated confirming to Pierson Moskowitz spectrum at 20m water depth. Wave incident into inner harbor through harbor entrance is performed using Boussinesq Wave model (BW). Wave disturbance experienced inside the harbour and at various berths are analysed. The paper discusses the progresses took place in short wave modeling and it demonstrates application of wave climate for the evaluation of harbor tranquility using various types of wave models.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.4
• /
• pp.230-241
• /
• 2020

Since the construction of Pohang New Port, the problems of the low harbor tranquility caused by decreasing port operation rate has been continuously reported. In order to improve the harbor tranquility, a detached breakwater (DB) has been constructed outside the outer breakwater of Pohang New Port in 2018~2020. In this study, the effectiveness of the DB was proved by comparing the reduction rates of wave heights that were observed before and after the construction of the DB. First, the observed data were compared with the numerical model results available from a previous study, and the model data showed reasonable agreement with measured data at 3 out of 4 locations inside the port. The discrepancy in one of the locations was because the model could not accurately calculated the effect of wave interference in the inner corner of the port. The observation data showed excellent results that the number of waves that exceeded 0.3 m, the critical value to reach desired harbor tranquility, was significantly reduced after the construction of the DB. In addition, the reduction rate, the ratio of wave heights between outside and inside of the port, was decreased after the DB construction, which proved that properly designed coastal structures such as DB in this study could be effective in improving the port tranquility. The results of this study can be usefully applied for solving problems in similar cases.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.06a
• /
• pp.255-257
• /
• 2014

The harbor tranquility is indicating the level of calmness in the mooring basin of harbor. It relates keenly to berthing/unberthing and cargo handling works but also it is an important indicator to get the minimum water area as the safe refuge. Therefore, it is necessary to analyze in complex the variation of wave height and direction caused by wave refraction, diffraction, shoaling and reflection from the incident waves from outside the harbor. In order to check the calmness inside a harbor, the numerical models are being used currently need fundamental reviews according to the difference of results which depend on their respective features. In this study, hence, it was introduced the validity of numerical models by comparing the computational results for Hupo harbor.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.3 no.4
• /
• pp.223-234
• /
• 1991

In this paper, the harbor tranquility problem is analysed by an improved boundary integral equation method. The effect of the diffracted wave transformation induced by the breakwater and structures located at a harbor mouth is considered. Partial reflection concept is also used to consider energy dissipation effects. The present model is verified by comparing the results of the model for rectangular and semi-circular harbors with the analytic solutions. they show a reasonable agreement. Also the wave height distribution of the HUPO harbor computed using the present model agree well to those from the previous hydraulic model tests. It also shows a good agreement with the results from the time-dependent mild slope equation model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.3
• /
• pp.440-447
• /
• 2012

Numerical model experiments of wave transformation due to the reclamation and the construction of breakwater in case of 50 years design wave were performed using time dependent mild slope equation included shoaling, refraction, diffraction, reflection and wave breaking. As waves propagate to the shore, wave height gradually diminishes by the bottom friction and wave breaking etc.. After the reclamation and the construction of 75 m length breakwater, wave height distributions in the lee of breakwater have the range of 29~128 cm. To make better the harbor tranquility the length of breakwater needs to extend more than 100 m. After the construction of breakwater, wave height in the lee of the structure was deduced over 80%.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.9 no.1
• /
• pp.24-34
• /
• 1997

To find the causes of the downtime problems in Pohang New Harbor, extensive field measurements of short- and long-period waves for 1.5 months and their analyses were made taking into account of wind and downtime records. Measured wave height ratios inside the harbor are appeared to be slightly larger than predicted ones using numerical methods in the previous studies. It is shown that the major causes of the downtime are the wind wave (or swell) higher than loading criteria and also swell with even smaller wave height but longer period(more than 10 sec). Waves of long-period components[0(min)] were recorded as 20 cm high in case of dominant seiche phenomena but they might not be related with the downtime problems.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.5
• /
• pp.296-306
• /
• 2020

It has been reported that the wave heights measured by Wave and Tide gauges (WTG) have been underestimated, and thus it is important to improve its measuring accuracy for enhancing estimation of harbor tranquility. In this study, the significant wave heights from WTG were calibrated using measured data from AWAC and Waverider buoys moored at the same four locations with the WTG. It was observed that the product of significant wave height and peak wave period, HT, was not underestimated but linearly proportional between the measurements by two instruments. This linearity was applied to develop 3^rd order polynomial functions that best represented the relationship between HT and significant wave heights measured by WTG. These functions were then applied to calibrate the WTG significant wave heights that were lower than 0.7 m, the critical value established for the low waves in this study. The results showed that the linearity between the AWAC (or Waverider buoy) and calibrated wave heights were improved, and the magnitude of underestimated WTG wave heights were increased to be more realistic. The results of this study are expected to be effectively applied for other data sets obtained by WTG only, to increase the observation accuracy of WTG and to improve the estimation of harbor tranquility.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.117-124
• /
• 2005

Recently the first stage of construction for Busan new port emerged over the sea surface at the north container terminal site. With this, there are lot of discussions and debates on increasing the water depth at the approaching channel and mooring basin from the existing 15m to 18m by dredging work in order to be able to serve 12,000TEU containership, and at the same time, correction to the reclamation plan of hinterland at the part of Undong Bay of the new port site. Since the attack of typhoon 'Maemi' in 2003, it is expected that the design wave parameters for coastal and harbor structures in this area would be somewhat changed and so the extreme wave condition at each terminal and tranquility of berthing area does, and therefore, it is necessary to analyze the tranquility at each berth. Hence in this study, we constructed a wave model for these conditions and performed simulation together with the circulation model simulation, compared with the field data collected. The result showed the increase of the harbor response throughout the basin but not severe condition. However, a certain location needs to be prepared for the rough sea condition when a severe typhoon hit the site.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1996.10a
• /
• pp.188-191
• /
• 1996

현재 국내에서는 단주기파의 항내에서의 다중반사를 고려할 수 있는 항내정온도 모형으로 Copeland(1985)의 모형을 개선한 한국해양연구소의 수치모형(한국해양연구소, 1987)과 Maruyama와 Kajima(1985)의 수치모형이 사용되고 있다. 이 수치모형들은 반무한방파제 후면의 회절이나 이안제 후면의 회절 등에 대해서는 수리실험이나 이론해와 비교되었으나 항만과 같이 다중반사가 발생하는 풍우에 대해서는 비교ㆍ검증이 부족하였다. (중략)

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1991.07a
• /
• pp.18-24
• /
• 1991

항내 정온도 해석은 일반적으로 유한차분법, 유한요소법 및 경계적분 방정식법 등의 엄밀해법과 근사 경계적분법, 고산의 방법 및 파향선법 등의 근사해법으로 구분된다. 엄밀해법은 지배방정식을 이산화 이외의 근사를 사용하지 않고 푸는 수치계산 방법으로 임의형상에의 적용성과 엄밀성이 뛰어나나 대상으로 하는 파의 파장이 짧고 항의 규모가 큰 경우에는 계산용량이 증대되여 실용적이지 못하다.(중략)