• Journal of Radiation Industry
• /
• v.5 no.4
• /
• pp.325-330
• /
• 2011

To predict the details of flow in industrial process unit, single photon emission computed tomography (SPECT) is a promising technique. Recently, industrial SPECT based on medical system has developed by researchers of the Korea Atomic Energy Research Institute (KAERI) and Hanyang University. In the present study, to confirm the effect of the number of detectors on image quality, and determine the optimal number of detectors in industrial SPECT, industrial SPECT system with various geometries were evaluated by the Monte Carlo simulation. CsI(Tl) detectors ($12mm{\times}12mm{\times}20mm$) with collimators (the geometric resolution of collimator $R_g$ was 4 cm at the center of the 30 cm diameter cylindrical vessel object) were modeled in a hexagonal array, and the point sources of $^{99m}Tc$, $^{68}Ga$, and $^{137}Cs$ were simulated at the center of the cylindrical vessel object using the MCNPX code. Then, the reconstruction images of each geometry were reconstructed using the expectation maximization (EM) algorithm. In this study, the reciprocity theorem was used to improve computation time required for system matrix of the EM algorithm. The result shows that the resolution of the reconstructed image was significantly improved by increasing the number of detectors in industrial SPECT system and more than 60 detectors will be required for the resolution of the reconstructed image.

• Korean Journal of Radiology
• /
• v.22 no.10
• /
• pp.1671-1679
• /
• 2021

Objective: We quantitatively measured the fat fraction (FF) in the vertebrae of patients with ankylosing spondylitis (AS) using magnetic resonance imaging (MRI) and investigated the role of FF as an indicator of both active inflammation and chronicity. Materials and Methods: A total of 52 patients with AS who underwent spinal MRI were retrospectively evaluated. The FF values of the anterosuperior and anteroinferior corners of the bone marrow in the L1-S1 spine were assessed using the modified Dixon technique. AS activity was measured using the Bath Ankylosing Spondylitis Disease Activity Index (BASDAI), Bath Ankylosing Spondylitis Functional Index (BASFI), AS Disease Activity Score (ASDAS), and serum inflammatory marker levels. AS disease chronicity was assessed by AS disease duration and the modified Stoke Ankylosing Spondylitis Spinal Score (mSASSS). Univariable and multivariable regression analyses were conducted to investigate the correlation between FF and other clinical characteristics. Results: The mean FF ± standard deviation of the total lumbar spine was 43.0% ± 11.3%. At univariable analysis, spinal FF showed significant negative correlation with BASDAI (β = -0.474, p = 0.002) and ASDAS with C-reactive protein (ASDAS-CRP; β = -0.478, p = 0.002) and a significant positive correlation with AS disease duration (β = 0.440, p = 0.001). After adjusting for patient age, sex, and total mSASSS score, spinal FF remained significantly negatively correlated with BASDAI (β = -0.543, p < 0.001), ASDAS-CRP (β = -0.568, p < 0.001), and ASDAS with erythrocyte sedimentation rate (β = -0.533, p = 0.001). Spinal FF was significantly lower in patients with very high disease activity (ASDAS-CRP > 3.5) than in those with only high disease activity (2.1 ≤ ASDAS-CRP ≤ 3.5) (p = 0.010). Conclusion: Spinal FF may help assess both AS disease activity and chronicity.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.4
• /
• pp.318-331
• /
• 1995

The c - axis oriented single crystal of $LiNbO_3$ and $LiNbO_3$ : 5mol%MgO was success-fully grown by Floating zone method using halogen lamp as a heat source. The effects of the sintering condition of the feed rod and the atmosphere gas during the crystal growth on the be havior of the feed rod/melt interface were studied for growing crystal with the high quality, and then, the optimum growth conditions were determined by studying the experimental param eters, such as gas flow rate, pulling rate, rotation speeds of the feed rod and the seed. The grown crystals were analyzed using the chemical etching to observe the tch pattern and the ICP (Inductively Coupled Plasma) to determine the composition uniformity and the impurity content of Fe. The effects of additive (5 mol % MgO) on the transmittance and refractive index was, also, analyzed. In order to compare the nonlinear optical oharacteristics of $LiNbO_3$ with those of the other optical materials, the nonlinear optical refractive index ($n_2$) was calcu l lated using the measured refractive index.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10b
• /
• pp.228-232
• /
• 2006

Ontology를 이용한 분산 시각미디어 검색 프레임워크인 HERMES(The Retrieval Framework for Visual Media Service)[1][2]는 보다 정확한 시각미디어 정보를 제공하고 웹서비스(Web Services)를 적용하여 HERMES/Provider[1][2]의 자율성을 보장한다. 웹기반의 분산 환경에서 Visual Media Data에 대한 지능적인 검색을 위하여 Meta Data와 Ontology를 이용하고 이기종간 통신을 위한 웹서비스를 제공하는 HERMES/ Broker[1][2]에서 예상치 못한 문제가 발생할 경우 문제를 해결할 수 있는 방법이 제시되지 않았다. 일반적으로 웹 서비스를 제공하는 서버에서 발생되는 결함은 해당 웹 서비스를 이용하여 개발되는 어플리케이션의 갑작스런 중단이나 오류의 원인이 된다. 따라서 결함을 해결할 수 있는 대책이 필요하며 HERMES의 Broker 서버 또한 웹 서비스의 결함이 발생하더라고 이를 효과적으로 해결하여 클라이언트에게 웹 서비스를 정상적으로 제공할 수 있는 결함허용 시스템 도입이 매우 중요하다. 때문에 HERMES 프레임워크가 클라이언트에게 신뢰성과 안정성이 보장된 웹 서비스의 제공을 위해서 Broker 서버에서 발생할 수 있는 결함을 효과적으로 극복할 수 있는 메커니즘이 필요하다. 본 논문에서는 Broker 서버 에서 웹 서비스와 관련된 결함이 발생하더라고 올바르게 운영될 수 있으며 분산 이미지 검색 프레임워크인 HERMES의 구조적 특성에 적합한 결함허용 시스템 설계 기법을 제안하여 HERMES 프레임워크가 클라이언트에게 투명성 있는 서비스를 제공하고 높은 신뢰성과 안정성이 확보될 수 있도록 구성하고자 한다. Query 수행을 여러 서버로 분산처리하게 함으로써 성능에 대한 신뢰성을 향상 시킬 수 있는 Load Balancing System을 제안한다.할 때 가장 효과적인 라우팅 프로토콜이라고 할 수 있다.iRNA 상의 의존관계를 분석할 수 있었다.수안보 등 지역에서 나타난다 이러한 이상대 주변에는 대개 온천이 발달되어 있었거나 새로 개발되어 있는 곳이다. 온천에 이용하고 있는 시추공의 자료는 배제하였으나 온천이응으로 직접적으로 영향을 받지 않은 시추공의 자료는 사용하였다 이러한 온천 주변 지역이라 하더라도 실제는 온천의 pumping 으로 인한 대류현상으로 주변 일대의 온도를 올려놓았기 때문에 비교적 높은 지열류량 값을 보인다. 한편 한반도 남동부 일대는 이번 추가된 자료에 의해 새로운 지열류량 분포 변화가 나타났다 강원 북부 오색온천지역 부근에서 높은 지열류량 분포를 보이며 또한 우리나라 대단층 중의 하나인 양산단층과 같은 방향으로 발달한 밀양단층, 모량단층, 동래단층 등 주변부로 NNE-SSW 방향의 지열류량 이상대가 발달한다. 이것으로 볼 때 지열류량은 지질구조와 무관하지 않음을 파악할 수 있다. 특히 이러한 단층대 주변은 지열수의 순환이 깊은 심도까지 가능하므로 이러한 대류현상으로 지표부근까지 높은 지온 전달이 되어 나타나는 것으로 판단된다.의 안정된 방사성표지효율을 보였다. $^{99m}Tc$-transferrin을 이용한 감염영상을 성공적으로 얻을 수 있었으며, $^{67}Ga$-citrate 영상과 비교하여 더 빠른 시간 안에 우수한 영상을 얻을 수 있었다. 그러므로 $^{99m}Tc$-transierrin이 감염 병소의 영상진단에 사용될 수

• ETRI Journal
• /
• v.31 no.5
• /
• pp.598-600
• /
• 2009

A highly efficient and compactly integrated balanced power amplifier (PA) for W-CDMA handset applications is presented. To overcome the size limit of a typical balanced PA, a bulky input divider is integrated into a PA MMIC, and a complex output network is replaced with simple lumped-element networks. For efficiency improvement at the low output power level, one of the two amplifiers in parallel is deactivated and the other is partially operated with corresponding load impedance optimization. The implemented PA shows excellent average current consumption of 34.5 mA in urban and 56.3 mA in suburban environments, while exhibiting very good load-insensitivity under condition of VSWR=4:1.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.06a
• /
• pp.121-125
• /
• 1998

Langasite is a new piezoelectric material which is similar to quartz in its acoustic behaviours. In this study, pure Langasite and Langasite family grouo powders were synthesized by the solid state reaction in air. And then diffusion of synthesized powders were controlled by B and C ions in the{{{{ { A}_{ 3} { B}_{5} { CD}_{ 14 }}}}} structure. Dielectric constant and lattice anisotripy of Langasite and family group were measured to be 17, 22~27 in the range of 1 kHz to 13 MHz and about 1.6. respectively.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.386-391
• /
• 1998

Parameter estimation method of induction motor for vector control is presented in this paper. It can be easily implemented and applied to inverters in the industrial field, because it needs no additional hardware such as voltage sensors and measuring equipment. The proposed algorithm in this paper is so straightforward and practical that it can be easily implemented on the built-in controllers with little overhead. The proposed estimation algorithm has good accuracy and repeatability for parameters due to the sensitivity of estimation errors. This enables its total consuming time to be made shorter. Experimental results and applications in the industrial fields verify the validity and usefulness of the proposed method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.319-320
• /
• 2007

We researched basic study about electrical characteristics of Zinc Selenide (Faraday Cell), which is known for various temperature of good-performance, that applied measuring current or protecting instrument by Optical Current Transducer, on Gas Insulated Switchgear. Measuring System consists of VCSEL produced 850nm IR Laser, Pin Photo Diode made of GaAs surveyed as Optical Power Meter, and Optical Fibers specified Multi-mode. We observed optical output changes during measurement of currents increasing by 100[A] in range from 0[A] to 1,000[A] and set temperature condition increasing by $5[^{\circ}C]$ in a range from $30[^{\circ}C]\;to\;60[^{\circ}C]$.

• Journal of the Korean Society of Food Culture
• /
• v.3 no.2
• /
• pp.143-151
• /
• 1988

'On Zu Bub,' written in Korean, is the anonymous old cook book. The kinds of cooking food recorded-Wine 44, Nu Ruk 2, Sauce 2, dessert 6, side dish 2 etc.-are fifty-six items in all. Especially it was written mirutely about brewage. The wines such as Sub Wang Mo You Bok Gyung Hyang Zu, Gu Ga Zu, Sin Bang Zu, Bang Se Hyang Zu, Zuhk Sun So Zu, Gye Dang Zu, Sa Mi Zu, Gwa Ha Jul Mi Zu were not found in other old cook books, 'Eum Sik Di Mi Bang' and 'Zu Bang Moon' and the contents about Gu Gi Za Zu was guoted from Zi Bung You Suhl. The seasonings used were black pepper, ginger, Chun Cho, Cinnamon, Sugar, ect, but red pepper was not used. But, we can find 'Bingsagua' from this book. First 'Bingsagua' has been found in 1789. 'On zu Bub' is guessed developed in late 1700's.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.40 no.3
• /
• pp.123-129
• /
• 2014

Objectives: The aim of this study was to verify the concordance of the measurement values when the same cephalometric analysis method was used for two-dimensional (2D) cephalometric radiography and three-dimensional computed tomography (3D CT), and to identify which 3D Frankfort horizontal (FH) plane was the most concordant with FH plane used for cephalometric radiography. Materials and Methods: Reference horizontal plane was FH plane. Palatal angle and occlusal plane angle was evaluated with FH plane. Gonial angle (GA), palatal angle, upper occlusal plane angle (UOPA), mandibular plane angle (MPA), U1 to occlusal plane angle, U1 to FH plane angle, SNA and SNB were obtained on 2D cephalmetries and reconstructed 3D CT. The values measured eight angles in 2D lateral cephalometry and reconstructed 3D CT were evaluated by intraclass correlation coefficiency (ICC). It also was evaluated to identify 3D FH plane with high degree of concordance to 2D one by studying which one in four FH planes shows the highest degree of concordance with 2D FH plane. Results: ICCs of MPA (0.752), UOPA (0.745), SNA (0.798) and SNB (0.869) were high. On the other hand, ICCs of gonial angle (0.583), palatal angle (0.287), U1 to occlusal plane (0.404), U1 to FH plane (0.617) were low respectively. Additionally GA and MPA acquired from 2D were bigger than those on 3D in all 20 patients included in this study. Concordance between one UOPA from 2D and four UOPAs from 3D CT were evaluated by ICC values. Results showed no significant difference among four FH planes defined on 3D CT. Conclusion: FH plane that can be set on 3D CT does not have difference in concordance from FH plane on lateral cephalometry. However, it is desirable to define FH plane on 3D CT with two orbitales and one porion considering the reproduction of orbitale itself.