• Food Science of Animal Resources
• /
• v.27 no.4
• /
• pp.440-449
• /
• 2007

This study was conducted to investigate the compositions of different cuts of Hanwoo bull beef. 10 cuts [Abjin (short plate), Bosup (top sirloin), Cheggt (striploin), Dngsim (loin), Guri (chuck tender), Hongduke (eye of round), Moksim (chuck roll), Sulgit (bottom round), Udoon (top round), Yangi(brisket)] were prepared from 10 Hanwoo bulls (-24 month old) slaughtered during 3 consecutive days. There were no significant differences in the calorie contents among the 10 cuts (p<0.05). In cholesterol content, Hongduke was significantly lower (26.74 mg/100 g) and Abjin was significantly higher (31.08 mg/100 g) than the other cuts (p<0.05). Free amino acid analysis revealed that there were high contents of glutamate (94.33-216.36 mg/100 g) and alanine (154.88-200.31 mg/100 g), followed by arginine, phenylalanine and lysine in the 10 cuts. In addition, Abjin, Bosup, Cheggt, Hongduke, Sulgit and Udoon had significantly higher inosine monophosphate (IMP) contents than Dngsim or Moksim (p<0.05). Inosine contents were highest in Bosup and Sulgit, whereas hypoxanthine contents were highest in Guri (p<0.05). Total collagen contents were significantly higher in Abjin followed by Yangi, Guri and Moksim (p<0.05). With regard to fatty acid composition, Dngsim had significantly higher $C_{18:0}$ than the other cuts, and Udoon had significantly higher $C_{20:4n6}$ than the other cuts (p<0.05). Total contents of saturated fatty acids (SFA) were significantly higher in Abjin, Dngsim and Yangi, whereas total contents of unsaturated fatty acids (UFA) were significantly higher in Hongduke than the other cuts (p<0.05).

• Food Science of Animal Resources
• /
• v.28 no.4
• /
• pp.422-430
• /
• 2008

This study was conducted to investigate the nutritional composition and meat quality properties of Hanwoo steer beef by different cut. Ten cuts [Abjin (short plate), Bosup (top sirloin), Cheggt (striploin), Dngsim (loin), Guri (chuck tender), Hongduke (eye of round), Moksim (chuck roll), Sulgit (bottom round), Udoon (top round), Yanaji (brisket)] prepared from 10 Hanwoo steers (28-30 months old) were used for this experiment. The range of pH was 5.46-5.64. In the chemical analysis, Hongduke contained highest protein contents (21.15%) and Dngsim had lowest protein contents (16.94%) (p<0.05). Fat contents were higher in Dngsim whereas those of Guri, Hongduke and Udoon were significantly lower when compared to the other cuts (p<0.05). There were not significantly different in meat color (L, a and b values) properties only except that L values were significantly higher in Dngsim among 10 cuts (p<0.05). Cooking loss (%) was higher in Guri, Hongduke, Udoon and Yangji whereas it was significantly love. in Cheggt (p<0.05). Warner-Bratzler shear force (WBS) was significantly higher in Abjin $(6.24inch^2/kg)$, whereas Dngsim $(3.45inch^2/kg)$ and Cheggt $(3.50inch^2/kg)$ were significantly lower than the other cuts (p<0.05). There was no significant difference in water-holding capacity (WHC) among 10 cuts (p>0.05). Total amino acid contents were significantly higher in Hongduke (p<0.05). Hongduke was highest in most kinds of amino acids, however, Udoon had the highest methionine and histidine contents among 10 cuts (p<0.05). Glutamate contents were high in all cuts and followed by aspartate, leucine and lysin. With regard to mineral contents, Ca was ranged from 47.63-70.69 mg/kg and Fe was ranged from 15.09-26.68 mg/kg in 10 cuts. Zn was highly contained in Guri (50.56 mg/kg) when compared to the other cuts (p<0.05).

• Korean Journal of Organic Agriculture
• /
• v.31 no.4
• /
• pp.453-460
• /
• 2023

This study was conducted to confirm the growth performance of Hanwoo steers according to the crude protein and calcium levels and their effects on carcass characteristics. The experiment consisted of a total of 4 groups: HPHC (CP 15%, Ca 1.2%), HPLC (CP 15%, Ca 0.6%), LPHC (CP 12.5%, Ca 1.2%), LPLC (CP 12.5%, Ca 0.6%). In the feeding trial, Hanwoo steers (650.8±16.27 kg, n = 32, 24 months of age) were divided into four feeding groups (n = 8 each) with the same initial body weight. Animals were fed with each rice straw and concentrate (1:9) until the late fattening stage. Growth performance was measured by daily weight gain, feed conversion rate, and final weight. Carcass characteristics were measured carcass weight, loin area, back-fat thickness and marbling score. There was no significant difference in growth performance and carcass characteristics among the treatment groups. However, the ratio of meat quality grade 1⁺ or higher was 76% in LPLC, which was higher than other treatments (HPHC, 63%; HPLC, 63% and LPHC, 50%). Therefore, reducing crude protein in the feed did not affect growth and carcass characteristics. In addition, calcium control in the late fattening stage did not affect growth performance. In LPLC, the ratio of meat quality 1⁺ or higher was the highest, so additional research on calcium control in feed is thought to be necessary. However, there was no significant difference in the relationship between protein and calcium levels in feed in all study results, so the influence of the two factors on each other is thought to be low.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.8
• /
• pp.1197-1206
• /
• 2016

Adipose tissue in the loin muscle area of beef cattle as a marbling factor is directly associated with beef quality. To elucidate whether properties of proteins involved in depot specific adipose tissue were sex-dependent, we analyzed protein expression of intramuscular adipose tissue (IMAT) and omental adipose tissue (OMAT) from Hanwoo cows, steers, and bulls of Korean native beef cattle by liquid chromatography-tandem mass spectrometry (LC-MS/MS)-based proteomic analysis, quantitative polymerase chain reaction (PCR) and western blot analysis. Two different adipose depots (i.e. intramuscular and omental) were collected from cows (n = 7), steers (n = 7), or bulls (n = 7). LC-MS/MS revealed a total of 55 and 35 proteins in IMAT and OMAT, respectively. Of the 55 proteins identified, 44, 40, and 42 proteins were confirmed to be differentially expressed in IMAT of cows, steers, and bulls, respectively. In OMAT of cows, steers, and bulls, 33, 33, and 22 were confirmed to be differentially expressed, respectively. Tropomyosin (TPM) 1, TPM 2, and TPM3 were subjected to verification by quantitative PCR and western blot analysis in IMAT and OMAT of Hanwoo cows, steers, and bulls as key factors closely associated with muscle development. Both mRNA levels and protein levels of TPM1, TPM2, and TPM3 in IMAT were lower in bulls compared to in cows or steers suggesting that they were positively correlated with marbling score and quality grade. Our results may aid the regulation of marbling development and improvement of meat quality grades in beef cattle.

• Food Science of Animal Resources
• /
• v.33 no.6
• /
• pp.723-729
• /
• 2013

In this study, the quality characteristics due to the influence of various thawing methods on electro-magnetic and air blast frozen beef were examined. The loin and round of second grade Hanwoo were sliced into 5-7 cm thickness and packed with aerobic packaging. The packaged beef samples, which were frozen by air blast freezing at $-45^{\circ}C$ and electro-magnetic freezing at $-55^{\circ}C$, were thawed by 4 thawing methods with refrigeration ($4{\pm}1^{\circ}C$), room temperature (RT, $25^{\circ}C$), cold water ($15^{\circ}C$), and microwave (2450 MHz). These samples were thawed to the point, which were core temperature reached $0^{\circ}C$. Analyses were carried out to determine drip and cooking loss, water holding capacity (WHC), moisture contents and sensory evaluation. Frozen beef thawed by microwave indicated a lower drip loss (0.66-2.01%) than the other thawing methods (0.80-2.50%). Cooking loss after electro-magnetic freezing indicated 52.0% by microwave thawing for round compared with 41.8% by refrigeration, 50.1% by RT, and 50.8% by cold water. WHC thawing by microwave with electro-magnetic freezing didn't showed any difference depending on the thawing methods, while moisture contents was higher thawing by microwave with electro-magnetic freezing than refrigeration (71.9%), RT (75.0%), and cold water (74.9%) for round. The texture of sensory evaluation for round thawed by microwave result was the highest than refrigeration (4.7 point), RT (6.4 point) and cold water (6.6 point), while sensory evaluation was no significant difference. Therefore, it was shown that microwave thawing is an appropriate way to reduce the deterioration of meat quality due to freezing.

• Journal of Animal Environmental Science
• /
• v.5 no.3
• /
• pp.157-170
• /
• 1999

This study was conducted to investigate the effects of Scoria, Quartz porphyry and Oak charcoal powder feeding by 1% level of concentrate on the fattening cross bred bulls(5/8 Korean Native Cattle, 2/8 Charolais, 1/8 Brahman germ plasma) Feeding trial was conducted with 4 treatment groups which were T1(Full feeding of concentrate and roughage for 12 months), T2(T1 and Scoria addition), T3(T1 and Quartz porphyry addition) and T4(Oak charcoal addition) for 360 days, consisting of 32 heads whose initially weights were about 299.7kg. The results obtained are summarized as follows; 1. During the over-all period, average daily gains by T3, T4, T2 and T1 were 1.024, 0.987, 0.977kg and 0.964, respectively, without a significant difference by treatments. 2. Concentrate intakes per body weight and TDN intakes required per unit of kilogram gain were lower in addition agent groups than in control, and in all the treatments feed efficiency was higher at early stage for 360 fattening day than at end stage. 3. Carcass weight, dressing percent, back-fat thickness and loin eye muscle area by treatments were 330.9 to 348.4kg(average 340.3kg), 55.2~56.2(average 55.8%), 0.41~0.55(average 0.46cm)and 76.0~80.9$\textrm{cm}^2$(average 77.6$\textrm{cm}^2$), respectively, and were improved in addition agent groups than in control. 4. Meat quality grade is higher in addition agent groups than in control, and heads of 1st grade by treatments was 3, 2, 1 and none in T4, T2, T3 and T1, respectively. 5. Incidence heads of diseases by treatment were not apparently different, but diseases of digestive system was decreased in addition agent groups than in control. 6. The nitrate nitrogen content of fattening bull dung which collected in rectum were 0.082~0.089% (average 0.084%), and the content in addition agent groups was smaller than in controll. 7. Income was higher in order of T4, T3, T2, and T1 and incomes of treatment groups were grater than that of control group by 21.4 to 33.5 percent. According to the above results it may be concluded that fattening bulls may be required to feed no more than 1% of Scoria, Quartz porphyry and Oak charcoal powder based on the concentrate feeding level during the fattening period(12 to 24 month of age) to produce high quality meat and increase income.

• Journal of Animal Science and Technology
• /
• v.63 no.5
• /
• pp.1008-1017
• /
• 2021

This study was conducted to investigate the effect of different fattening periods on the growth performance, carcass characteristics, and economic traits of Holstein steers. Sixty Holstein steers (8.0 ± 0.28 months old) with an average body weight (BW) of 231.88 ± 2.61 kg, were randomly allocated to five different fattening period treatments: 20, 21, 22, 23, and 24 months (n = 12 in each treatment group). Final BW and average daily gain (ADG) did not differ among the treatment groups during the early fattening period. At the late stage of the fattening period, the final BW of steers in the 24-month treatment group (812.84 kg) was greater (p < 0.05) than that of steers in the 20-month treatment group (750.39 kg). During the same period, steers in the 20- and 21-month treatment groups had a significantly higher (p < 0.05) ADG than those in the 22-month treatment group. The highest ADG (1.36 kg/day) was found in the 20-month treatment group (1.36), followed by the 21- (1.33 kg/day), 22- (1.22 kg/day), 23- (1.21 kg/day), and 24- (1.14 kg/day) month treatment groups. The feed conversion ratio (FCR) increased as the fattening period increased, and the FCR was 12.88% lower in the 20-month treatment group than in the 24-month treatment group. However, no significant differences were detected in back-fat thickness, loin area, marbling score, and chemical characteristics (water, crude protein, and crude fat content) among the treatment groups. The composition of fatty acids including C18:0, C18:1, saturated fatty acids, unsaturated fatty acids, and poly-unsaturated fatty acids did not differ among the experimental groups. As the fattening period increased, production costs increased, resulting in a decrease in gross income. The gross income for steers in the 24-month treatment group was 35.8% and 23.5% lower than that for steers in the 20- and 21-month treatment groups, respectively. Taken together, the best performance, including the ADG, FCR, and gross income, was obtained when the fattening program of the Holstein steers lasted 20 months.

• Journal of Life Science
• /
• v.15 no.5 s.72
• /
• pp.840-846
• /
• 2005

This study was carried out to investigate the effect of electron beam irradiation and cooking temperature on physico-chemical characteristics and lipid oxidation of beef. A total of six beef carcasses ($280\∼300 kg$) that were quality grade $1^{+}$(marbling score No.7, meat color No.4, maturity No.1, texture No.1) was purchased at the commercial slaughter house. The carcasses were transported and washed using high pressure water, and pasteulized with $ 50\% $ ethyl alcohol in the laboratory. After the carcasses were deboned and trimmed, loin and round were taken out to make steak (1.5cm thickness) or ground beef respectively. Samples were wrap or vacuum packaged and irradiated with 0, 3, 4.5, 6 and 7.5 kGy using electron-beam accelerator at Samsung Heavy Industries Ltd. Co. (in Taejun). Irradiated samples were cooked with different methods(electronic pan and gas oven) and temperatures ($ 60^{\circ}C, 70^{\circ}C and 80^{\circ}C$) and used to measure fatty acid composition, TBARS, cholesterol oxide products and panel test scores. The content of saturated fatty acids increased by increasing heating temperature in oven boiling steak (OBS) and pan boiling steak (PBS), and there was no difference by electron-beam irradiation. Both irradiated and non-irradiated treatment were high as the heating temperature increased in TBARS by heating temperature in PBS (p < 0.05) and the amount of Malonaldehyde (MA), standard of fat deterioration, was increased in OBS (p < 0.05). Non-irradiated and 3, 6 kGy treatment produced about 2 fold amount of MA at $ 60^{\circ}C $ compared with $ 80^{\circ}C $. In comparison with PBS, OBS produced much amount of MA and a bit different from non-irradiated treatment but did not show no tendency. As irradiation levels and heating temperature increased, the amount of cholesterol oxides products was increased and also pan-heating method, direct heating method, significantly increased the degree of oxidation compared with oven-heating method, indirect heating method (p < 0.05).