• 한국항공우주학회지
• /
• 제47권8호
• /
• pp.541-548
• /
• 2019

본 논문은 Flush Air Data Sensing(FADS) 시스템의 방빙에 요구되는 열량을 예측하였다. 설계 초기 단계에서 효과적으로 요구 열량을 예측하기 위해 handbook 기법을 적용하였다. 이를 위해 비행환경에 따른 대표 물리량들을 입력하면 handbook 기법의 수식을 통해 열량을 예측하는 프로그램을 개발하였다. 이때 예측 값의 신뢰도를 높이기 위하여 handbook 기법에서 핵심적인 변수인 충돌효율계수를 CFD 해석을 통해 계산해 내었다. 액적 충돌 판정을 효과적으로 수행하기 위해 Kriging 기법을 적용하여 물체 형상에 대한 등고면 DB를 구축하였다. 또한 액적 궤적 예측을 위해 마찬가지로 Kriging 기법을 적용하여 속도장 DB를 구축하였다.

• 지역사회간호학회지
• /
• 제15권1호
• /
• pp.76-83
• /
• 2004

Purpose: This study was aimed at investigating the relationship between retention of the maternal child health handbook, awareness of DPT additional immunization and DPT additional immunization, and to provide basic information to enhance the DPT additional immunization rate. Method: The study subjects were 312 women whose children were between four and six years old, and residing in six provinces of Gyungsangnam do. Data was collected with a 10 item questionnaire by interviews from July 1st to 30th, 2003, and analyzed with descriptive statistics and X2 test at a significance level of 0.05, by two tailed test. Results: The awareness of DPT additional immunization was significantly higher in the women who retained the maternal child health handbook, than their counterparts. The rate of DPT additional immunization was significantly higher in the women who were aware of the DPT additional immunization or who retained the maternal child health handbook, than their counterpart. Conclusion: The DPT additional immunization rate was related to retention of the maternal child health handbook and awareness of DPT additional immunization. Therefore it is recommended that measures be developed and taken to increase the retention rate of the maternal child health handbook and awareness of DPT additional immunization, to enhance the rate of DPT additional immunization.

• Structural Engineering and Mechanics
• /
• 제16권3호
• /
• pp.275-294
• /
• 2003

In this study, 24 high-strength concrete dapped-end beams were tested to study the effects of the amount of main dapped-end reinforcement, the nominal shear span-to-depth ratio, and the concrete strength on the shear strength of dapped-end beams. Test results indicate that the shear strength of dapped ends increases with the increase in the amount of main dapped-end reinforcement and the concrete strength. The shear strength of dapped-end beam increases with the decrease of nominal shear span-to-depth ratio. A simplified method for determining the shear strength of reinforced concrete dapped ends is also proposed in this paper. The shear strengths predicted by the proposed method and the approach of PCI Design Handbook are compared with test results. The comparison shows that the proposed method can more accurately predict the shear strength of reinforced concrete dapped-end beams than the approach of PCI Design Handbook.

• Asia pacific journal of information systems
• /
• 제18권1호
• /
• pp.79-96
• /
• 2008

One of the roles of the Semantic Web services is to execute dynamic intra-organizational services including the integration and interoperation of business processes. Since different organizations design their processes differently, the retrieval of similar semantic business processes is necessary in order to support inter-organizational collaborations. Most approaches for finding services that have certain features and support certain business processes have relied on some type of logical reasoning and exact matching. This paper presents our approach of using imprecise matching for expanding results from an exact matching engine to query the OWL(Web Ontology Language) MIT Process Handbook. MIT Process Handbook is an electronic repository of best-practice business processes. The Handbook is intended to help people: (1) redesigning organizational processes, (2) inventing new processes, and (3) sharing ideas about organizational practices. In order to use the MIT Process Handbook for process retrieval experiments, we had to export it into an OWL-based format. We model the Process Handbook meta-model in OWL and export the processes in the Handbook as instances of the meta-model. Next, we need to find a sizable number of queries and their corresponding correct answers in the Process Handbook. Many previous studies devised artificial dataset composed of randomly generated numbers without real meaning and used subjective ratings for correct answers and similarity values between processes. To generate a semantic-preserving test data set, we create 20 variants for each target process that are syntactically different but semantically equivalent using mutation operators. These variants represent the correct answers of the target process. We devise diverse similarity algorithms based on values of process attributes and structures of business processes. We use simple similarity algorithms for text retrieval such as TF-IDF and Levenshtein edit distance to devise our approaches, and utilize tree edit distance measure because semantic processes are appeared to have a graph structure. Also, we design similarity algorithms considering similarity of process structure such as part process, goal, and exception. Since we can identify relationships between semantic process and its subcomponents, this information can be utilized for calculating similarities between processes. Dice's coefficient and Jaccard similarity measures are utilized to calculate portion of overlaps between processes in diverse ways. We perform retrieval experiments to compare the performance of the devised similarity algorithms. We measure the retrieval performance in terms of precision, recall and F measure? the harmonic mean of precision and recall. The tree edit distance shows the poorest performance in terms of all measures. TF-IDF and the method incorporating TF-IDF measure and Levenshtein edit distance show better performances than other devised methods. These two measures are focused on similarity between name and descriptions of process. In addition, we calculate rank correlation coefficient, Kendall's tau b, between the number of process mutations and ranking of similarity values among the mutation sets. In this experiment, similarity measures based on process structure, such as Dice's, Jaccard, and derivatives of these measures, show greater coefficient than measures based on values of process attributes. However, the Lev-TFIDF-JaccardAll measure considering process structure and attributes' values together shows reasonably better performances in these two experiments. For retrieving semantic process, we can think that it's better to consider diverse aspects of process similarity such as process structure and values of process attributes. We generate semantic process data and its dataset for retrieval experiment from MIT Process Handbook repository. We suggest imprecise query algorithms that expand retrieval results from exact matching engine such as SPARQL, and compare the retrieval performances of the similarity algorithms. For the limitations and future work, we need to perform experiments with other dataset from other domain. And, since there are many similarity values from diverse measures, we may find better ways to identify relevant processes by applying these values simultaneously.

• 대한소아치과학회지
• /
• 제33권4호
• /
• pp.728-737
• /
• 2006

연구 목적은 근거중심 소아치과학 연구의 기본이 되는 체계적 고찰의 방법과, 체계적 고찰의 통계적 방법이 되는 메타분석에 대하여 소개하는 것이었다. 연구 자료로서 Cochrane Handbook for Systematic Reviews of Interventions 등을 참고하였다. 체계적 고찰의 첫 단계이자 가장 중요한 것은 잘 규정된, 초점이 또렷한 질문을 만드는 것이고, 다음에 자료의 검색을 하고 선정된 자료에 대한 타당도 평가를 한 후, 변수의 종류에 따라 자료를 분석하고 결과를 해석하여 결론을 도출한다. 자료 분석의 통계학적 방법인 메타분석의 필요성과 원리 및 변수의 종류에 따른 자료별 메타분석 방법에 대하여 요약 기술하였다.

• 대한기계학회논문집A
• /
• 제33권2호
• /
• pp.145-152
• /
• 2009

SGBEM(Symmetric Galerkin Boundary Element Method)-FEM alternating method has been proposed by Nikishkov, Park and Atluri. In the proposed method, arbitrarily shaped three-dimensional crack problems can be solved by alternating between the crack solution in an infinite body and the finite element solution without a crack. In the previous study, the SGBEM-FEM alternating method was extended further in order to solve elastic-plastic crack problems and to obtain elastic-plastic stress fields. For the elastic-plastic analysis the algorithm developed by Nikishkov et al. is used after modification. In the algorithm, the initial stress method is used to obtain elastic-plastic stress and strain fields. In this paper, elastic-plastic J integrals for three-dimensional cracks are obtained using the method. For that purpose, accurate values of displacement gradients and stresses are necessary on an integration path. In order to improve the accuracy of stress near crack surfaces, coordinate transformation and partitioning of integration domain are used. The coordinate transformation produces a transformation Jacobian, which cancels the singularity of the integrand. Using the developed program, simple three-dimensional crack problems are solved and elastic and elastic-plastic J integrals are obtained. The obtained J integrals are compared with the values obtained using a handbook solution. It is noted that J integrals obtained from the alternating method are close to the values from the handbook.

• Journal of Preventive Medicine and Public Health
• /
• 제47권1호
• /
• pp.27-35
• /
• 2014

Exposure factors based on the Korean population are required for making appropriate risk assessment. It is expected that handbooks for exposure factors will be applied in many fields, as well as by health department risk assessors. The present article describes the development of an exposure factors handbook that specifically focuses on human activities in situations involving the possible risk of exposure to environmental contaminants. We define majour exposure factors that represent behavioral patterns for risk assessment, including time spent on routine activities, in different places, on using transportation, and engaged in activities related to water contact including swimming, bathing and washing. Duration of residence and employment are also defined. National survey data were used to identify recommended levels of exposure factors in terms of time spent on routine activities and period of residence and employment. An online survey was conducted with 2073 subjects who were selected using a stratified random sampling method in order to develop a list of exposure factors for the time spent in different places and in performing water-related activities. We provide the statistical distribution of the variables, and report reference levels of average exposure based on the reliable data in our exposure factors handbook.

• 분석과학
• /
• 제21권5호
• /
• pp.364-374
• /
• 2008

2000년도에 COMNAP/SCAR에 의해 극지지역의 환경모니터링에 관한 표준기술지침서인 'Antarctic Environmental Monitoring Handbook'이 발간되었다. 이 지침서에 따라 남극세종기지주변지역의 토양시료중의 중금속을 분석하였다. 시료분해방법은 고압산분해 방법을 사용하였고, 분석방법으로는 동위원소희석 유도결합플라스마질량분석법을 사용하여 토양중의 Pb, Cu, Zn 성분을 분석하였다. 분석방법의 정확성을 확인하기 위해 표준시료인 NIST 2702를 분석한 결과 인증값의 99.5~100.8% 범위내에서 일치하였다. Chelex 100 이온교환수지를 사용하여 간섭이온을 제거하기 위해 매질을 분리하였다. 측정결과 인위적오염이 예상되는 기지주변지역의 중금속의 평균농도는 각각 Pb 332.9 mg/kg, Cu 95.6 mg/kg, Zn 115.3 mg/kg로 나타났으며, 기지에서 멀리 떨어진 지역의 평균농도는 각각 Pb 28.1 mg/kg, Cu 101.8 mg/kg, Zn 115.6 mg/kg로 나타났다. Pb 농도는 기지주변지역과 멀리 떨어진 지점에서 현저한 차이를 보였다.

• 한국태양에너지학회 논문집
• /
• 제37권5호
• /
• pp.77-84
• /
• 2017

The purpose of this paper is to propose the way of computing conduction time series factors (CTSF) using numerical method. After the accuracy of the numerical solution procedure being verified, the method is applied to the wall type 24 and roof type 14 of ASHARE to find the conduction time series coefficients, so called conduction time series factors. The results agree well with the values presented in the ASHRAE handbook. The method proposed can be easily applied to find unknown CTSF for more complex structures. It provides information about the temperature changes at a given location and time, thus validity of generated CTSF can be checked easily.

• 미술이론과 현장
• /
• 제7호
• /
• pp.165-188
• /
• 2009

In the development of linear perspective, Brook Taylor's theory has achieved a special position. With his method described in Linear Perspective(1715) and New Principles of Linear Perspective(1719), the subject of linear perspective became a generalized and abstract theory rather than a practical method for painters. He is known to be the first who used the term 'vanishing point'. Although a similar concept has been used form the early stage of Renaissance linear perspective, he developed a new method of British perspective technique of measure points based on the concept of 'vanishing points'. In the 15th and 16th century linear perspective, pictorial space is considered as independent space detached from the outer world. Albertian method of linear perspective is to construct a pavement on the picture in accordance with the centric point where the centric ray of the visual pyramid strikes the picture plane. Comparison to this traditional method, Taylor established the concent of a vanishing point (and a vanishing line), namely, the point (and the line) where a line (and a plane) through the eye point parallel to the considered line (and the plane) meets the picture plane. In the traditional situation like in Albertian method, the picture plane was assumed to be vertical and the center of the picture usually corresponded with the vanishing point. On the other hand, Taylor emphasized the role of vanishing points, and as a result, his method entered the domain of projective geometry rather than Euclidean geometry. For Taylor's theory was highly abstract and difficult to apply for the practitioners, there appeared many perspective treatises based on his theory in England since 1740s. Joshua Kirby's Dr. Brook Taylor's Method of Perspective Made Easy, Both in Theory and Practice(1754) was one of the most popular treatises among these posterior writings. As a well-known painter of the 18th century English society and perspective professor of the St. Martin's Lane Academy, Kirby tried to bridge the gap between the practice of the artists and the mathematical theory of Taylor. Trying to ease the common readers into Taylor's method, Kirby somehow abbreviated and even omitted several crucial parts of Taylor's ideas, especially concerning to the inverse problems of perspective projection. Taylor's theory and Kirby's handbook reveal us that the development of linear perspective in European society entered a transitional phase in the 18th century. In the European tradition, linear perspective means a representational system to indicated the three-dimensional nature of space and the image of objects on the two-dimensional surface, using the central projection method. However, Taylor and following scholars converted linear perspective as a complete mathematical and abstract theory. Such a development was also due to concern and interest of contemporary artists toward new visions of infinite space and kaleidoscopic phenomena of visual perception.