• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.2
• /
• pp.177-186
• /
• 2002

This paper describes a research work on the development of computer-aided design system far the deep drawing & ironing of high pressure gas cylinder. An approach to the design system is based on the knowledge-based rules. Knowledge for the system is formulated from plasticity theories, handbook, experimental results and the empirical knowledge of field experts. This system has been written in AutoLISP on the AutoCAD Rl4.0 using personal computer. This system is composed of three modules which are input. process design and drawing.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.4 no.1
• /
• pp.255-263
• /
• 2001

The main purpose of this paper is to investigate strength characteristics of Aluminum 2024-T3 in high temperature environment. Tensile test of Aluminum 2024-T3 has been carried out in high temperature environment. The stress-strain relations are investigated with temperature and Young's modulus, yield strength and ultimate strength are deduced from the test results. The modulus and strength of the test are compared with those of MIL HANDBOOK and tips on structural design in high temperature environment are suggested.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.716-719
• /
• 1995

Although design process is a creative work, it includes a lot of iterations. Statistics show that about 15 to 40 percent of the total design activity is spent on time-consuming retrieval of technical informations such as standard part, handbook, engineering equation,previous design and so on. On the other hand, product structure and parts specifications change with the design process, which also need to be traced accordingly. The BOM, design history, and all the relecant technical informations can be managed can be efficiently within a unified framework called configuration. This paper presents a prototype of a configuration manager which is a part of the engineering data management system for machine tools.

• Journal of the Korean Institute of Educational Facilities
• /
• v.7 no.2
• /
• pp.23-35
• /
• 2000

This study aims at revealing utilization planning by surveying and analyzing unused classrooms of primary schools' facilities between Japan and Korean. Focused on high and multi-functionization, rather qualitative aspect than quantitative. Various and positive utilization planning of unused classrooms are needed. In Japan, unused classrooms of primary schools have already appeared in urban and rural area together. However it has been presented the effective utilization of these facilities even though many schools have tried using those. With these circumstances, Educational Authorities in Japan have researched the utilization methods of these facilities to use as supporting facilities for school education, management and opening to regional communities. Also, they are promoting to refer each school to a guide handbook for unused classrooms. Therefore, this study with some cases between Japan and Korean should be valuable data for effective use and planning of our cases.

• The Korean Journal of Mycology
• /
• v.26 no.2 s.85
• /
• pp.200-210
• /
• 1998

To study the species diversity of the genera Strobilomyces and Heimiella in Korea, 52 specimens were collected from 1982 to 1996 at 25 locations including Odaesan. Collected specimens were observed and three species among them were identified and described by observing macroscopic and microscopic characters. The three species are as follows; Strobilomyces floccopus (Vahl ex Fries) Karsten, S. confusus Singer, Heimiella japonica Hongo.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.523-528
• /
• 2000

In multi-span bridges, a shear key is often used to distribute the seismic force to the case, the shear key is sometimes required to be reinforced to withstand the seismic force. To improve the strength of shear key, the strength and failure mode of shear key have to be carefully estimated and the proper reinforcement scheme should be elaborated. The test results show that the strength of shear key is 2.5 times higher than the strength calculated by PCI design handbook. Also the strength of shear key is greatly improved by placing PT bars into shear key. In this study, the analytical method to evaluate the strength of sheat key and the reinforcement scheme are proposed.

• Transactions of the Korean hydrogen and new energy society
• /
• v.17 no.3
• /
• pp.272-278
• /
• 2006

This study is quantitatively assessing of safety about dispenser of hydrogen station because it is hydrogen energy to efficient safety use. The large leakage of hydrogen gas is the most important accident among others occurrence possibility in hydrogen station. It had written FT by top event and calculated unavailability, m-cutsets, leakage frequency, etc with FTA after each base event collect reliability data by reliability data handbook, THERP-HRA and estimation of the engineering.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.3
• /
• pp.53-60
• /
• 1992

This paper deals with developing an Expert system for tool selection using knowledge base system approach, and its application. For the sake of building of knowledge base, the information from process through sensor, tool handbook and interview with expert are referrenced and managed. The system developed shows good application flexibility in providing the actual cutting process with the selection of tool(insert, holder) and cutting conditions(feed, speed, rake type, and so on), is found as a useful system for real-time machining process. The Expert system for tool selection is written in TURBO PROLOG ver. 2.0 for inference engine capability, and can be run in interactive mode for user friendliness. In order to apply the system developed in actual cutting process, more parameters should be considered and scrutinized, and the system should be further extended in modular basis.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.527-530
• /
• 1997

An automated process planning system for cold forging of non-axisymmetric parts of comparatively simple shape was developed in this study. Programs for the system have been written with Visual LISP in the AutoCAD using a personal computer and are composed of four main modules such as input module, shape cognition and shape expression module, material diameter determination module and process planning module. The design rules and knowledges for th system are extracted from the plasticity theories. handbook, relevant reference and empirical knowledge of field experts. Generally, in forging, only front view is needed for expression of axisymmetric parts, but non-axisymmetric parts are needed both front view and plane. At the plane, this system cognizes the external shape of non-axisymmetric parts - number of sides of regular polygon and radius of a circle circumscribing the polygon of n sides. At the front view, the system perceives diameter of axisymmetric portions and hight of primitive geometries such as polygon, cylinder, cone, concave, convex, etc.

• Journal of the Korean Society for Railway
• /
• v.9 no.4 s.35
• /
• pp.419-424
• /
• 2006

In this paper we study on a method to predict and to demonstrate the reliability of the Korea high speed train control system in quantitative point of view. For the prediction of the reliability in train control system which is composed of electronic parts, Relax Software 7.7 automation tool is employed and MIL-HDBK-217 Handbook that is a standard for the prediction of the failure rate in electronic components is used. Mean Time Between Failure (MTBF) is predicted based on the failure rate of the subsystems, State Modeling and Markov Modeling method is used to express a reliability function of the train control system composed by hardware redundancy as a function of time. We propose a Reliability Test which is performed on the level of the subsystems and Failure Report, Analysing, Correction action system which use the test operation data to prove the predicted reliability.