• Journal of the Ergonomics Society of Korea
• /
• v.22 no.1
• /
• pp.31-42
• /
• 2003

This study describes a modification of the technique for human error analysis in nuclear power plants (NPPs) which adopts advanced Man-Machine Interface (MMI) features based on computerized working environment, such as LCOs. Flat Panels. Large Wall Board, and computerized procedures. Firstly, the state of the art on human error analysis methods and efforts were briefly reviewed. Human error analysis method applied to NPP design has been THERP and ASEP mainly utilizing Swain's HRA handbook, which has not been facilitated enough to put the varied characteristics of MMI into HRA process. The basic concepts on human errors and the system safety approach were revisited, and adopted the process of FMEA with the new definition of Error Segment (ESJ. A modified human error analysis process was suggested. Then, the suggested method was applied to the failure of manual pump actuation through LCD touch screen in loss of feed water event in order to verify the applicability of the proposed method in practices. The example showed that the method become more facilitated to consider the concerns of the introduction of advanced MMI devices, and to integrate human error analysis process not only into HRA/PRA but also into the MMI and interface design. Finally, the possible extensions and further efforts required to obtain the applicability of the suggested method were discussed.

• Journal of Acupuncture Research
• /
• v.30 no.3
• /
• pp.51-59
• /
• 2013

Objectives : This study was designed to evaluate clinical evidence of acupuncture treatment for peripheral facial palsy in South Korea. Methods : All process was independently proceeded by two investigators. Literature search was performed in 9 databases from their inception to February 2013. Searched reports was twice excluded for title, abstract and body. And then, data extract and analysis was done before assessing risk of bias by Cochrane Handbook. Results : 10 randomized controlled trials(RCT) were finally included. 4 RCT handled postauricular pain with facial palsy. All articles at least used in combination with two treatments. Interventions like pharmacopuncture, electroacupuncture, scalp acupuncture etcetera were conducted as treatment to evaluate efficacy, and some study reported advantageous effects of treatment group compared to baseline or control group. Adverse events didn't referd to in any studies. In assessing risk of bias, indefinite and uncertain information made all included trials to have a high risk of bias. Conclusions : Because of methodological deficit, there is no sufficient evidence to allow any conclusion about the efficacy of acupuncture for peripheral facial palsy. Therefore, well designed trials with high quality is needed from now on.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.576-580
• /
• 2010

NRCS의 유출곡선지수 산정법(CN; Runoff Curve Number method)은 유역내의 토지 이용 및 토지 피복, 토양특성, 수문학적 조건 등을 이용하여 총 강우량으로부터 유효 유출량을 계산하는 방법으로서 이론의 간편성과 적용성으로 인하여 여러 분야에 적용되고 있다. 그러나, 유출곡선지수의 특성상 지역적인 특성에 따라 차이가 발생할 수 밖에 없음에도 국내에서는 대부분 미국 NEH(National Engineering Handbook)에서 제시한 기준을 이용하고 있는 실정이다. 이에 대하여 본 연구에서는 국내 유역의 강우-유출 특성을 반영한 유출곡선지수를 산정하고 강우에 따른 직접 유출량을 모의하기 위한 방법을 연구하였다. 이를 위하여 보청천 유역의 관측 강우-유출 자료에 Hawkins et al(1993)등이 제시한 점근 유출곡선지수방법을 적용하고 이를 국가수자원관리종합정보시스템(WAMIS)에서 제시한 값과 비교하였다. 또한 유역의 대표 유출곡선지수에 대한 회귀식을 유도하고 이를 이용하여 보청천 유역의 하계 유출을 모의하고 그 결과를 비교 분석 하였다. 연구결과 대표 유출곡선지수식을 이용한 유역의 직접유출 모의결과가 단일 유출곡선지수시의 모의결과보다 더 우수한 결과를 나타내었다.

• Journal of the Korea Concrete Institute
• /
• v.11 no.3
• /
• pp.141-152
• /
• 1999

Precast prestressed double-tee slab may be designed by the PCI Design Handbook. It is based on the bridge construction and is required for reorganization for the use of buildings in the domestic construction environments. Much enhanced sections are developed from the reforming process on the determined design factors in the previous experimental works on double tees. Pre-determined shape, reinforcement detail, and 5000 psi concrete strength can not be expected as the best solution for the domestic construction requirements because large amount of use on that systems are anticipated. Flexural tests are performed on four full-scale 12.5m proto-type models, "least depth double tee", which are resulted from the optimization process. Domestic superimposed live load regulation, domestic material properties which is available to product, building design requirements and economy in construction are considered as the main factors to establish. the first two sections are double tee section for 1.2 ton/$\m^2$ market live load with straight and one-point depressed strands and the second two are for 0.6 ton/$\m^2$ parking live load with those strand types. All of the specimens tested fully comply with the flexural strength requirements as specified by ACI 318-95. However, the research has shown that following improved considerations are needed for better result in practice. The locations and method of connection for the lowest bottom mild bar, connection method between precast and cast-in-place concrete, and dap-end reinforcement are need to be improved.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.367-372
• /
• 2006

The revision of SOLAS, Chapter V, which entered into force on 1 July 2002, has firmly established the electronic navigational chart as part of the international maritime safety system. Its possible recognition as a paper chart equivalent confirms the considerable safety benefits provided by the official Electronic Chart Display and Information Systems (ECDIS). Elaborated by the Author IAMU Model Course on operational use of ECDIS aims to provide answers to some of the most commonly asked questions regarding various types of electronic charts (ENC, RNC, DNC) and electronic chart systems (ECDIS, RCDS, ECS). Following the earlier adoption of the International Convention STCW 78/95 and IMO model training courses, e.g. IMO Model Course on ECDIS [2], to assist in the implementation of the Convention and the associated IMO Assembly resolutions, a number of IAMU Member Universities had suggested that IAMU should develop model training courses on higher academic level to assist in achieving a more rapid transfer of information and skills regarding new developments in marine technology. The provision of model courses could help instructors improve the quality of their existing courses and enhance their effectiveness in meeting the requirements of the IAMU. In this paper the Author presents the results of two IAMU research projects sponsored by Nippon Foundation, titled 'IAMU Model Course on Training in Operational Use of ECDIS' and 'IAMU Handbook on ECDIS'.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.12
• /
• pp.1411-1418
• /
• 2011

In this study, to avoid surging in the system as a way to ensure the proper discharge requires the design of the valve capacity rating objective is to develop a program. Approximation algorithm for the capacity evaluation is suggested. Loss coefficients obtained by the algorithm is calculated put in the governing equation for the valve flow coefficient and capacity. Calculated values were compared with numerical analysis results for the verifying their validity. The proven formula is created using Excel and it can be easily available the valve design engineers. Creation of analysis models were using a version of Unigraphics NX 4.0, numerical analysis were using a flow analysis commercial program ANSYS CFX 12.0 version. Equations were referenced 'Handbook of Hydraulic Resistance - 3rd Edition'.

• Journal of the Korean Solar Energy Society
• /
• v.38 no.5
• /
• pp.27-36
• /
• 2018

The purpose of this paper is to apply the numerical solution procedure to compute conduction time series factors (CTSF) for construction materials with large thermal capacities. After modifying the procedure in Ref. [9], it is applied to find the CTSF for the wall type 19 and the roof type 18 of ASHRAE. The response periods for one hr pulse load are longer than 24hrs for these wall and roof. The CTSF generated using modified procedure agree well with the values presented in the ASHRAE handbook. The modified procedure is a general procedure that can be applied to find CTSF for materials with complex structures. For the large thermal capacity materials, it should be checked whether thermal response period of the material is over 24hr or not. With suggested solution procedure, it is easy to check the validity of the CTSF based on 24hr period.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.11
• /
• pp.137-143
• /
• 2013

A teacher needs documented information includes basic information about students and lectures to teach students. Currently, both non-electronic and electronic teachers diary are used in most of the field of education. designed and implemented. The electronic teachers diarys only driven on desktop PC. Therefore, managing school affairs with this un-portable system is very inefficient. In this paper, we designed and Implementation Smart Teachers Diary System to check students' information in any time and place with own smart device.

• The Journal of Pediatrics of Korean Medicine
• /
• v.35 no.3
• /
• pp.28-42
• /
• 2021

Objectives The purpose of this study is to investigate the effect of Tuina treatment for children with Autism Spectrum Disorder (ASD), and to propose guidance to future studies or application in clinical setting. Methods The articles published from year 2000 to May 2021 by China National Knowledge Infrastructure (CNKI) were searched by setting up field as '中醫學', '中藥', '中西醫結合' and by setting up keyword as '小儿自閉症', '儿童自閉症', '自閉症譜系障碍', 'Autism', 'Autism spectrum disorder' that corresponds to participant and '推拿', '導引', '按摩', 'Tuina', 'massage'. Results Nine selected articles were analyzed and summarized by authors and year published, characteristics, diagnostic criteria, treatment methods and contents, treatment duration, evaluation criteria and results of the study. The articles were also reviewed by reported side effects, and evaluated the quality of the study according to Cochrane Handbook's Risk of Bias 2 (RoB 2) assessment of the Randomized Control Trial (RCT) articles. All studies used Tuina treatment to achieve effective results for pediatric autism spectrum disorder. Conclusion Pediatric Tuina treatment (TM) is a non-invasive treatment that does not stimulate patients with unstable ASD but increase patient adherence, and can be safely and simply operated. Therefore, pediatric Tuina treatment is worth utilizing as a clinical basis for further development of ASD treatment.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.10
• /
• pp.102-111
• /
• 2021

Maintainability is a major design parameter that includes availability as well as reliability in a RAM (reliability, availability, maintainability) analysis, and is an index that must be considered when developing a system. There is a lack of awareness of the importance of predicting and analyzing maintainability; therefore, it is dependent on past-experience data. To improve the utilization rate, maintainability must be managed as a key indicator to meet the user's requirements for failure maintenance time and to reduce life-cycle costs. To improve the maintainability-prediction accuracy in the detailed design stage, we present a maintainability-prediction method that applies Method B of the Military Standardization Handbook (MIL-HDBK-472) Procedure V, as well as a Korean maintainability-prediction software package that reflects the system complexity.