• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.5
• /
• pp.795-802
• /
• 2002

For assessing significance of a defect in a component operating at high (creeping) temperatures, accurate estimation of fracture mechanics parameter, $C^{*}$-integral, is essential. Although the J estimation equation in the GE/EPRl handbook can be used to estimate the $C^{*}$-integral when the creep -deformation behavior can be characterized by the power law creep, such power law creep behavior is a very poor approximation for typical creep behaviors of most materials. Accordingly there can be a significant error in the $C^{*}$-integral. To overcome problems associated with GE/EPRl approach, the reference stress approach has been proposed, but the results can be sometimes unduly conservative. In this paper, a new method to estimate the $C^{*}$-integral for deflective components is proposed. This method improves the accuracy of the reference stress approach significantly. The proposed calculations are then validated against elastic -creep finite element (FE) analyses for four different cracked geometries following various creep -deformation constitutive laws. Comparison of the FE $C^{*}$-integral values with those calculated from the proposed method shows good agreements.greements.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.472-476
• /
• 2011

Railway R&D technology development projects for the economic value of technology development does not mention the estimated economic impact on future policies must reflect the issues that are raised. In the research phase of technology development by providing value and economic effects can increase the utilization of technology development are considered. However, some items in some way to analyze and quantify its effect on what the procedures are not standardized, not as needed by individual researchers and analysis by providing a variety of reliability problems can occur. Therefore, the development of technologies to measure the value and economic impact analysis and the development of a standardized manual is needed. In this paper, development of railway technology R & D performance (technical, economic) to be estimated by an objective analysis of standardized and that man should aim to create. And the standard manual of the national economic effect in the development of technologies (production inducement effect, the effect of import substitution industries, including analysis using the taxable year), due to technology development and economic benefits (investment in railways in the handbook and the feasibility of the proposed railway project to produce various ally standards), technology development, and on which to base the valuation will.

• Research in Community and Public Health Nursing
• /
• v.26 no.4
• /
• pp.405-414
• /
• 2015

Purpose: The purposes of this study were to examine the effects of home visit healthcare using a complex program on community-dwelling frail elders' physical strength, frailty, and depression and to compare the effects among three regions. Methods: This study was conducted as a quasi-experimental study using one-group pretest-posttest design. A total of 86 subjects were sampled from three regions (metropolis, small city, and rural area). The program was applied for 14 weeks. This program consisted of disease management by a visiting nurse, exercise with a visiting nurse, self exercise, telephone monitoring, health education, counseling, providing handbook, and incentive. Physical strength was measured by balance, upper-limb, and lower-limb muscle strength. Frailty was measured by the Korean Frail Scale and depression was measured by the Geriatric Depression Scale. Paired t-test and ANCOVA were used to analyze the effects. Results: Physical strength, frailty, and depression were significantly improved after applying the complex program. There were not differences among the regions. Conclusion: Home visit healthcare using a complex program was effective in improving frail elders' physical strength, frailty, and depression. There were not differences among the regions. Therefore, home visit healthcare using a complex program needs to be expanded to other regions.

• KIEAE Journal
• /
• v.11 no.4
• /
• pp.37-45
• /
• 2011

In order to have better understanding of the concept and meaning of soundscape, it is very important to consider entirely the objectives, activities, historical development processes and accomplishments of world soundscape project leading by R. Murray Schafer. Therefore, the ultimate purpose of this study is to inquire into the concrete development processes and practical activities of the soundscape in order to correspond to Schafer's conception of a tuning of the world. The establishment of WSP is based on noise pollution, listening attitudes and noisy music. Schafer formulated 5 types of item as a target, and wrote down concrete activities to achieve the goals. Especially, he devised the conceptual, educational, political and social strategies as the practical strategies of WSP. It is obtained various products by the activities of WSP from the planning starting year in 1969 to the stagnation period in 1979. That is, there are the social survey on noise-vancouver 1969, the book of noise, Okeanos, a study of community noise by-laws in canada 1972, the music of the environment, the vancouver soundscape, european sound diary, five village soundscapes, handbook for acoustic ecology and so on. The research activities of WSP arouse inspiration in many people interested in sound. Specially, it is emphasized the importance of increasing for their social roles in order to more actively improve and create the quality of sound environment. Also, it shows us the directions on how to lead our furture sound.

• Journal of the Korea Concrete Institute
• /
• v.11 no.6
• /
• pp.57-67
• /
• 1999

Optimization scheme is presented for the design of precast prestressed double-tee beams used as slabs in the parking or market structures. The objective considered is defined by a function that minimizes the hight of the double-tee beam, including the prefabricated element and the concrete topping poured in a second phase. The Sequential Quadratic Programming method is adopted to solve the problem. As an example 12 double-tee beams are designed with the design loads of the current design code of our country. The results from optimization process show that at least 29cm less in overall height than that designed by PCI design handbook. The section determined from the optimization process was refined for practical considerations. A MathCad 7.0 Pro Spreadsheet was prepared to verify all ACI requirements for flexure, shear and deflections. Flexural tests are performed on four full-scale 12.5m prototype models and show that all the specimens are fully comply the flexural strength requirements as specified by ACI 318-95. The present optimization scheme can be used for wider application of the design of precast prestressed double-tee beams with different materials and configurations particularly for in a large scale or for important designs.

• Journal of the Korean Society of Food Culture
• /
• v.14 no.2
• /
• pp.103-113
• /
• 1999

Jeupjang like salted soybean paste with vegetable is the Korean traditional side order eating at table. Bibliographical studies on the Jeupjang in historic books such as Jeungbo-Sanlim-Keongjae(Re-edition of agriculture economic), Imwon- Keongjae Ji(Book of country economic) and Keuhap-Chongseo(Handbook of household) described the Korean food in the 18 century carried out. In addition, investigation and analytical studies on various home-made Jeupjang in present was accomplished. Jeupjangs were classified into three types according to variety preparing methods. Three types were fermented soybean paste (Doenjang) type using traditional Meju(soybean cake stater) for Jeupjang, salted pickle (Jangachi) type buried cucumber and eggplant into soybean paste or soysauce (Kanjang), and salted sauer kraut (Kimchii) type prepared vegetable in Jeupjang-Meju mash. The procedures for producing Jeupjang were Jeupjang-Meju making, and mixing vegetable with Meju powder into brine. At last process was fermented in horse wastes or grasses for 7-14 days. But manufacturing methods of Jeupjang before the 18 century were different in present. Nowadays glutinous rice, red pepper powder and various vegetable were used for domestic Jeupjang.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.2
• /
• pp.195-202
• /
• 2002

An automated process planning system for cold forging of non-axisymmetric parts of comparatively simple shape was developed in this study. Programs for the system have been written with Visual LISP in the AutoCAD using a personal computer and are composed of four main modules such as input module, shape cognition and shape expression module, material diameter determination module and process planning module. The design rules and knowledges for the system are extracted from the plasticity theories, handbook, relevant reference and empirical knowledge of field experts. Generally, in forging, only front view is needed for expression of axisymmetric parts, but non-axisymmetric parts need front and plane view. At the plane, this system cognizes the external shape of non-axisymmetric, parts - number of sides of regular polygon and radius of a circle circumscribing the polygon of n sides. At the front view, the system perceives diameter of axisymmetric portions and height of primitive geometries such as polygon, cylinder, cone, concave, convex, etc.

• Korean Parent-Child Health Journal
• /
• v.7 no.2
• /
• pp.121-132
• /
• 2004

Purpose: This study aimed to develop a breast feeding program for mothers of premature infants. The program was applied and its effect was evaluated on stress, knowledge and breastfeeding behaviors of premature infant mothers. Method: This study employed a one group pre- and post-test quasi-experimental design. The data were collected from 17 participants from August 15 to October 24, 2004, at a N1CU at D University Medical Center located in Susan, Korea. Data were analyzed by means of frequency, SD, and t-test using SPSS version 10. Result: After the program, participants significantly showed a greater level of knowledge than before the program (t=-5.750, p=.000). No statistically significant differences in stress level scores were found (t=1.453, p=.153). The breastfeeding practice rate was 94.1%: Conclusion: This educational program using a handbook and video had a positive effect on increasing knowledge and practice of breastfeeding among premature infant mothers. It is suggested that this study be replicated with a larger sample size to compare group responses.

• Journal of Acupuncture Research
• /
• v.27 no.6
• /
• pp.1-10
• /
• 2010

Objectives : The aim of this systematic review was to assess the efficacy of acupuncture and its relevant modality on post-stroke muscle spasticity Methods : We included 7 randomized controlled trials(RCTs) and 1 crossover study on acupuncture on the post-stroke muscle spasticity. Articles searches were performed in various databases in October 2009. Eight studies from 38 articles met the inclusion criteria and were used to assess the quality of clinical trials by means of Jadad scale, STRICTA, CONSORT statement and cochrane-handbook for systematic reviews of interventions. Results : Electrical stimulation such as electroacupuncture and TENS on acupoints was used in five studies. Repeatition of electroacupuncture showed significant decrease of the post-stroke muscle spasticity and persistence of the effect. Only three studies were assessed high quality as the methodological assessment tool(Jadad scale) and none of the studies matched STRICTA recommendations. Conclusions : This systematic review shows that there is beneficial effects of electroacupuncture on the post-stroke muscle spasticity. Further study of large population with high methodological quality will be needed.

• Journal of the Korean Society of Safety
• /
• v.23 no.2
• /
• pp.37-44
• /
• 2008

The safety assessment for facility industry is now being periodically performed. For the purpose of scientific safety management, QRA(Quantitative Risk Assessment) is also being performed, and reliability data of the facilities is essential to perform the assessment. Generally, the existing safety assessment is performed by using the values announced in other industry processes, which result in the drop of reliability. In order to solve this problem, there is an urgent need to establish reliability database for the facilities. The most appropriate method is to perform a direct reliability analysis towards the facilities undergoing safety assessment. In this study, in compliance with the assessment method and procedure of OREDA-2002 handbook, the facility reliability data are collected, which include the calendar time and operational time in terms of different facility items, the number of failures in terms of different failure mode, the mean, standard deviation, lower limit and upper limit of failure rate, and the failure rate. And the data process method for this special occasion is also proposed when the number of failure is 0.