• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1164-1170
• /
• 2013

Since trees sequestrate carbon and reduce the level of its concentrations in the atmosphere, forests should be considered as carbon pools as well as timber producers. This study focuses on finding optimal harvest age when carbon sequestration from trees is accounted by forest managers. A dynamic programming employs a static volume matrix, and solves the harvest decision problems. If carbon value is accounted in a tree harvest decision model, the optimal harvest age increases. The harvest age of pine trees set by the government for national forests is longer than the optimal solution. It is possible to say that the managers of national forests put more values on the standing pine trees than the value of carbon sequestration. The regulation for private forests, on the other hand, ends up in a shorter harvest age than the optimal solution, and this discrepancy could lead to an inefficient private forest management.

• Transactions on Electrical and Electronic Materials
• /
• v.1 no.2
• /
• pp.32-37
• /
• 2000

Effect of alloying element additions to Ag on thermal conductivity and electrical conductivity of sheath materials for Bi-Pb-Sr-Ca-Cu-O(BSCCO) tapes has been characterized. The thermal conductivity at low temperature range (10~300K) of Ag and Ag alloys were evaluated by both direct and indirect measurement techniqueas and compared with each other, It was observed that the thermal conductivity decreases with increasing the content of alloying element such as Au, Pd and Mg. Thermal conductivity of pure Ag at 3 0K was measured to be 994.0 W(m.K) on the other hand, the corresponding values of $Ag_{0.9995}Mg_{0.0005}$, $Ag_{0.974}$, $Au_{0.025}$, $Mg_{0.001}$, $Ab_{0.973}$, $Au_{0.025}$, $Mg_{0.002}$ and $Ag_{0.92}$, $Pb_{0.06}$, $Mg_{0.02}$ were 342.6, 62.1, 59.2 and 28.9 W(m.K), respectively, indicating 3 to 30 times lower than that of pure Ag. In addition, the thermal conductivity of pure Ag measured by direct and indirect measurement techniques was 303.2 and 363.8 W(m.K) The difference in this study is considered to be within an acceptable error range compared to the reference data.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.36-41
• /
• 2003

This paper presents the results of power spectra using the fundamental and low frequency harmonic components of leakage current waveform to study aging on contaminated EPDM insulator(was serviced during 1997-2001, region Pohang, korea) under salt fog conditions. Experiments have been conducted in the chamber salt fog and at the 16KVrms. The salt contents adjusted as 0g,25g,50g and 75g per liter of deionized water. The onset of dry-band arcing on polymer insulators could be determined by signal processing the low frequency harmonics components. A correlation has been found between the fundamental and low harmonic components of power spectra on leakage current. Where aging could be associated with an increase in the level of both the fundamental and low frequency harmonics components of leakage current. Surface aging for contaminated EPDM insulators occurred when the fundamental component of leakage current was greater then some level On the other hand, when the polymer insulator approached failure, the fundamental component of leakage current reached relatively high values and low frequency harmonics components of the leakage current trended to decrease. The results suggest that both the fundamental and low frequency harmonics of leakage current can be used as a tool to determine both the beginning of aging and before flashover, end of life EPBM insulator in salt fog.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.5
• /
• pp.20-30
• /
• 2012

In case of analyzing PAHs (EPA 16 compounds) in oil-contaminated soils, the lump of peaks may occur because of the aliphatic and polar compounds in oil. This phenomenon is due to the lower accuracy of the analysis. To solve this problem, evaluation of application of silicagel-alumina multi-layer fraction was performed using standard substances and oil-contaminated soils. As a result of application of silicagel-alumina multi-layer fraction cleanup method using standard substances, recovery rates of surrogate standards (5 compounds including Naphthalene-d8) were 83~100% and those of target standards were 75~129%. These were to meet the target values (60~130%) in this study. When used 4% water-silicagel column analyze PAHs in oil-contaminated soils, Some problems were generated for quantitative analysis of PAHs; concentration of PAHs was underestimated due to an upward baseline of internal standard (recovery rate: less than 60%) and overestimated by the lump of peaks which were not purified (the biggest recovery rate: more than 400%). On the other hand, in case of silicagel-alumina multi-layer fraction cleanup method, recovery rate of surrogate standards were 61~101.6%. Therefore this cleanup method was considered a valid method to improve accuracy of analysis of PAHs in oil-contaminated soils.

• Korean Journal of Materials Research
• /
• v.27 no.9
• /
• pp.501-506
• /
• 2017

Surface morphology and optical properties such as transmittance and haze effect of glass etched by physical and chemical etching processes were investigated. The physical etching process was carried out by pen type sandblasting process with $15{\sim}20{\mu}m$ dia. of $Al_2O_3$ media; the chemical etching process was conducted using HF-based mixed etchant. Sandblasting was performed in terms of variables such as the distance of 8 cm between the gun nozzle and the glass substrate, the fixed air pressure of 0.5bar, and the constant speed control of the specimen stage. The chemical etching process was conducted with mixed etching solution prepared by combination of BHF (Buffered Hydrofluoric Acid), HCl, and distilled water. The morphology of the glass surface after sandblasting process displayed sharp collision vestiges with nonuniform shapes that could initiate fractures. The haze values of the sandblasted glass were quantitatively acceptable. However, based on visual observation, the desirable Anti-Glare effect was not achieved. On the other hand, irregularly shaped and sharp vestiges transformed into enlarged and smooth micro-spherical craters with the subsequent chemical etching process. The curvature of the spherical crater increased distinctly by 60 minutes and decreased gradually with increasing etching time. Further, the spherical craters with reduced curvature were uniformly distributed over the etched glass surface. The haze value increased sharply up to 55 % and the transmittance decreased by 90 % at 60 minutes of etching time. The ideal haze value range of 3~7 % and transmittance value range of above 90 % were achieved in the period of 240 to 720 minutes of etching time for the selected concentration of the chemical etchant.

• Safety and Health at Work
• /
• v.9 no.3
• /
• pp.319-325
• /
• 2018

Background: Prolonged neck flexion during smartphone use is known as a factor of neck pain and alteration of neck muscle activity. Studies on the effects of shoulder taping on neck discomfort and neck muscle responses while texting on a smartphone are still lacking. The aim of this study was to examine the effects of shoulder taping on neck discomfort using a numerical rating scale, and neck muscle activity and fatigue using a surface electromyography during a texting task on a touchscreen smartphone. Methods: Twenty-five healthy adolescents used the dominant hand to perform a 30-minute texting task using a touchscreen smartphone at two separate times under one of the following two conditions: taping across the upper trapezius muscle and no taping. Neck discomfort, normalized root mean square, and normalized median frequency slopes for upper trapezius, cervical erector spinae, and sternocleidomastoid muscles were recorded. Results: The results revealed that shoulder taping provided significantly lower neck discomfort than no taping (p < 0.001). However, shoulder taping did not significantly alter normalized root mean square and normalized median frequency slope values of all muscles when compared with no taping controls. Conclusion: Shoulder taping reduces neck discomfort but does not affect neck muscle activity and fatigue while texting on a touchscreen smartphone.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.2
• /
• pp.3-9
• /
• 2000

This study concerns the distribution and dependence of moisture content(MC) in wood for same thickness in different vapor transmission conditions. The specimens were disks of 70-mm in diameter and 20-mm in thickness from quartersawn lumber of Korean red pine(Pinus densiflora S. et Z.). The experiments were conducted in ten different conditions on the difference of the vapor pressures by the JIS Z-0208. The distribution of moisture content in wood can be illustrated by two straight lines intersecting at the point of about ten percent Me. On the other hand, when more or less than about 10 percent, the distribution of the Me can be illustrated by one straight lines. Therefore, it is considered that the values of 10 percent Me has no relation to the wood and experimental conditions. It's assumed that 10 percent is the boundary point at which the moisture sorption energy changes. In a previous study, diffusion coefficient is almost constant with no relation to a thickness of the woods for the constant experimental conditions. But, in this study, it seems that diffusion coefficient from the moisture gradient vary with the Me of wood in different vapor transmission conditions.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.36 no.2
• /
• pp.31-41
• /
• 2018

The dung beetle, Copris tripartitus (Coleoptera: Scarabaeidae), is an endangered insect in South Korea. Previously, partial mitochondrial COI and CytB gene sequences have been used to infer genetic diversity and gene flow of this species in South Korea. In this study, we additionally collected C. tripartitus (n = 35) from one previous locality and two new localities, sequenced COI and CytB genes, and combined these with preexisting data for population genetic analysis. Sequence divergence of current samples showed slightly lower values [4.86% (32 bp) for COI and 4.16% (18 bp) for CytB] than that in the previous study. Nucleotide diversity (${\pi}$) ranged from 0.005336 (Gulupdo) to 0.020756 (Seogwi-dong) in COI and 0.009060 (Aewol-eup) to 0.017464 (Seogwi-dong) in CytB. Seogwi-dong samples that showed the highest ${\pi}$ in the previous study also showed the highest ${\pi}$ in this study for both gene sequences. The newly investigated Gulupdo samples had the lowest haplotype diversity for both gene sequences. They also had the lowest ${\pi}$ for COI and the second lowest ${\pi}$ for CytB. On the other hand, the newly added Haean-dong sample had relatively higher diversity estimates. Gene flow among populations was high, although significant difference was only detected between Gulupdo and Anmado or between Gulupdo and Seogwi-dong for COI sequences (P < 0.05). Considering the high genetic diversity and gene flow in C. tripartitus populations, one major issue regarding conservation seems not to be recovery of genetic diversity.

• Journal of Korean Society on Water Environment
• /
• v.21 no.3
• /
• pp.230-235
• /
• 2005

The main purpose of the flocculation process is to make flocs bigger to be removed easily in the following processes. The flow pattern and mixing intensity have a great influence on flocculation. In this study, the flow pattern was examined by a hydraulic tracer-test, where 3 water treatment plants having $800,000m^3/d$, $44,000m^3/d$ and $40,000m^3/d$ were employed. Also, the settling test was conducted to find out the relationship between the mixing intensity and the settling ability of flocs. The hydraulic tracer-test was conducted for the various flocculation processes that have different structures of flocculation basins. In the result, the retention time distribution (RTD) curves for the flocculation processes were quite different. In case of the inappropriate structure of the flocculation basin, the flow is not even so that the floc does not grow enough. To find out the relationship between mixing intensity and settleability of flocs, G-values were calculated and the settling test was conducted for two flocculation basins which have the same conditions except the G-value. For the flocculation basin with uneven G-value, the floc settleability was revealed poor. On the other hand, the flocculation basin with even G-value, the settleability was better than the previous one. From these experimental results, it is confirmed that the flow pattern is closely related to the structure of the flocculation basin and the settleability is affected by mixing intensity. Therefore the flow pattern and the strength of the mixing intensity should be examined sufficiently to design and operate flocculation basin.

• Korean Journal of Microbiology
• /
• v.38 no.3
• /
• pp.180-185
• /
• 2002

The direct viable count (DVC) and plate count (PC) methods was used to measure the number of bacteria in potable groundwater samples collected from bottled water from the market, mineral water, and edible groundwater near the urban areas and the stock farming congested areas. As a result, the number of living bacteria by DVC was comprised 30~80% of the total direct count (TDC), whereas the number of living bacteria by PC was around l~30% of DVC. Such results show that viable but non-culturable (VBNC) bacteria exist in the potable groundwater with high percentages. On the other hand, upon measuring the value from the conventional nutrient broth (NB), $10^-2$ fold diluted nutrient broth (DNB), and R2A broth, the values from the DNB and R2A showed 2~50 times higher than the conventional NB medium. These results indicate that oligotrophic bacterial groups which can multiply in the low nutrient broth abundantly exist in the oligotrophic environment like potable groundwater.