• Journal of the Korean Ceramic Society
• /
• v.26 no.3
• /
• pp.305-314
• /
• 1989

Effect of pH variation in starting solution for the making of hydroxyapatite powder was studied in relation to the sinterability of the powder and their mechanical properties of the sintered hydroxyapatite ceramics. The sinterability of hydroxyapatite powder prepared at different pH was found to be improved with increase in pH value of the starting solutions. Thus the powders prepared from the higher pH solutions including 10.5, 11.0 and 11.5 could be well densified almost upto theoretical density by firing for 1 hr at 1,00$0^{\circ}C$. But the powder based on pH 10 exhibited less sinterability even being fired at much higher temperature of 1,10$0^{\circ}C$, it gave only 90-95% of theoretical density. On the other hand the powder prepared on the lowest pH value 9.5 could not be well densified and it could obtain only 78% of theoretical density even by firing at 1,30$0^{\circ}C$ for 1hr. It was found that prismatic crystals of whitlockite were always included in the sintered bodies based on the lower pH values as a minority crystalline phase together with the major crystalline phase of hydroxyapatite and its inclusion might impair the sinterability of powder. However in the case of the higher pH, the powder contained only hydroxyapatite as a crystalline phase on sintering without any minorities. The sphere shape of crystals might help effectively the densification of the bodies. The best mechanical properties could be obtained from the body of pH 11 sintered at 1,10$0^{\circ}C$, which gave 99.5% of theoretical density, 662Kg/$\textrm{mm}^2$ of vickers hardness and 1,352Kg/$\textrm{cm}^2$ of diameteral compression strength.

• Korean Journal of Environmental Agriculture
• /
• v.6 no.1
• /
• pp.61-66
• /
• 1987

1. In the vegetable crops, only MEP and Malathion showed a litte higher positive rate than other pesticides in general. On the other hand, parathion and captan were not detectable at all. 2. In the fruits, pesticides, MEP, PAP and Parathion had a little high positive rate, and Diazinon, and captan were not detectable at all. 3. However, the detected values of the pesticides in the vegetables and fruits were far below from korean tolerances and internationally recommended limits and tolerances, showing only $\frac{1}{3}{\sim}\frac{1}{66}$ and $\frac{1}{8}{\sim}\frac{1}{500}$ of Korean tolerance in vegetables and fruits, respectively.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.10a
• /
• pp.230-239
• /
• 2006

The depth, width and alignment of fairway that are main port water facilities should be designed considering the various elements including particulars of design ships, weather and sea conditions around fairway and method of ship-handling. However not only the existing Japanese design standard for fairway and also those of other countries do not take into consideration of such kind of elements and no design standard is made by quantitative analysis. In this circumstance the new design standard (Approach Channels, A Guide for Design) depending on classified various elements and quantitative analysis was proposed in 1997 by PIANC and IAPH. But it was proved that calculated values according to this standard were unfounded and had some problems to output the discontinuous value by small difference of calculation condition because the each value fur each element was simply added. And also it is hard to apply this standard to the design of port water facilities in Japan because this [A Guide for Design] is the design standard for long channels in European port. The proposal of more reasonable Japanese standard will be expected by applying the study result of naval architecture and navigation and by the cooperation of ship operators to use fairway, naval architects to built ships and civil engineers to dredge fairway. The concept of a fairway in 'Design standard fur fairway in next generation' is defined as passage for approach channel) and traffic lane designated by light buoys as navigable water for safe navigation. In 'Design standard for fairway in next generation' depth, width and alignment are picked up among many design elements of a fairway. Design method for those elements is shown based on design ships and navigational environments. This standard shows the method of design for each dimension depending on characteristic on design ship and weather and sea condition. On the other hand, in case of existing fairway, it is possible to decide the size of ship and navigation criteria by opposite analysis.

• Journal of Pharmaceutical Investigation
• /
• v.37 no.6
• /
• pp.369-376
• /
• 2007

Cyclosporine (CsA) and tacrolimus (FK506) have a narrow therapeutic range, and their pharmacokinetic (PK) characteristic varies among individual. They are also substrates for cytochrome P450 (CYP) 3A4, 3A5 genes, and P-glycoprotein, the product of the multidrug resistance 1 (MDR1). The aims were to investigate the relationship between CYP3A and MDR1 genotypes and their PK parameters among healthy subjects. We investigated the genotype for CYP3A and MDR1 gene in human using a polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) method. After oral administration of CsA and FK506 (100 mg and 1 mg, respectively), whole blood samples were taken up to 24 hours. Blood CsA and FK506 concentrations were measured by LC/MS/MS. Each PK parameters were compared using Kruskal-Wallis test according to the CYP3A and MDR1 genotype. We found that the values of AVC for CsA were significantly different among CYP3A5 and MDR1 exon 26 (C3435T) genotypes (P=0.037 and P=0.049). On the other hand, the AUC for FK506 was significantly different only among CYP3A5 genotypes (P=0.013). The results clearly demonstrate the effects of CYP3A5 and MDR1 exon 26 on Cys and FK506 disposition.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.6
• /
• pp.1025-1036
• /
• 2001

This paper explores the effects of price discount frequency on consumer evaluation of clothing brand equity as well as the impact on consumers who exhibit different consumer characteristics. Following a preliminary investigation, two clothing brand groups were identified according to the frequency of their price discounts, one with a high frequency of price discounts, the other with a low frequency. Each brand group consisted of three women's clothing brands. A questionnaire was developed and administered to 351 females between the ages of nineteen and thirty-four in October 2000. The questionnaire included questions on evaluations on clothing brand equity (i.e., perceived quality, brand image, perceived value, reliability and brand knowledge), on consumer characteristics (i.e., clothing knowledge, clothing evaluative criteria, price perception and demographic characteristics), as well as on price discount frequency. Statistical tests, such as factor analysis. t-test and pearson's correlation, were used to analyze the data. Results of this research showed that price discount frequency negatively impacted consumer perception of clothing brand equity. The negative influence was particularly strong on the perceived quality and brand image dimensions of brand equity. The findings also suggested the effect of price discount frequency on consumer assessment of clothing brand equity was related to consumer characteristics as well. The equity of the clothing brand group with a low frequency of price discounts was positively related to clothing knowledge, price-quality inference, price-prestige inference, sale prone-ness. price mavenism, valuing the fashionable and symbolic uses of clothing and family income. On the other hand, it was negatively related to low price consciousness. The equity of the clothing brand group with a high frequency of price discounts was positively related to utilitarian economic aspects of clothing values as well as to low price consciousness. To establish and maintain high brand equity, marketers must pay attention to the frequency of price discount as it may have a negative impact on clothing brand equity.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.3_4
• /
• pp.473-484
• /
• 2002

The physical characteristics of silk and wool fabrics dyed with OFS-FR and SM-FR were examined and color difference and colorfastness of these fabrics were analyzed. The results are as follows; 1. The thickness, density and weight of both dyed fabrics were increased than those of undyed fabrics independently of dyeing materials and mordants. 2. Air permeability of all the silk samples increased than that of undyed silk, on the other hand, air permeability of most of wool samples decreased than that of undyed wool. 3. Thermal insulation values of silk samples were not consistent with dyeing conditions, but those of wool samples increased than those of undyed fabrics regardless of dyeing materials and mordants. 4. Color difference was clear between OFS-FR and SM-FR dyed fabrics. The colors dyed with OFS-FR-Al and OFS-FR-chitos an showed violet, those dyed with SM-FR displayed yellowish, in addition to in case of wool, dyed with OFS-FR-Cu the color was greenish yellow, in case of silk dyed with SM-FR-Cu that was yellowish red. 5. Sense of silk fabrics by sensory-test was soft and smooth. Feeling of colors in silk fabrics was wick, warm and slightly brilliant. In case wool, sense of dyed fabrics was slightly soft and slightly rough. Feeling of colors in wool fabrics was warm but not elegant. Therefore the result of sensory-test in silk might be better than that of in wool. 6. Colorfastness to dry cleaning and perspirations was good, but that to washing and sunlight was not fine.

• Textile Coloration and Finishing
• /
• v.8 no.3
• /
• pp.52-58
• /
• 1996

In order to study an applicable level for the graft finish of silk filaments and the characteristics of silk fabric, some sample fabrics were woven with grafted weft and the characteristics of sample fabrics were analyzed to evaluate the mechanical properites and the handle values according to the graft yield(%) of MMA and HEMA monomers on silk filaments. 1. The tensile properties were detected in the increase of linearity(LT) and the recovery in time of the increasing resilience(RT). 2. The bending properties were detected to have a lot of effect on the balance of bending rigidity(B) to hysteresis(2HB) according to the elastic relaxation of warp tension and the interlacing stress. 3. The shearing properities were detected to show the softness and the elastics in a case of the decrease in shearing rigidity(G) and hysteresis(2HG, 2HG5) according to the graft yields. 4. The compression properties were detected in the decrease of linearity(LC) and the uniformity of resilience(RC). It explains that the tendancies of compressible variation is not accepted. 5. The surface properities were detected to be affected by the surface forms of grafted silk filaments and the variation in the morphologies of interlacing sections. Considering the interlacing eveness, MMA grafted fabrics were accepted within the level of WOMEN'S THIN DRESS(KN-201-LDY) but HEMA grafted fabrics were not accepted. 6. The variation of handles were detected in the increase of total hand(TAV) within the levels of 65% of KOSHI and 82% of HARI on the average. 7. The handle fashions were detected in the nature of Habuta and Dechine from MAA graft but the nature of Fugi were shaped from HEMA graft in proportion to the graft yields.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.5
• /
• pp.712-720
• /
• 2007

To investigate clonal variations of recombinant Chinese hamster ovary(rCHO) clones in response to culture pH and temperature, serum-free suspension cultures of two antibody-producing CHO clones(clones A and B), which were isolated from the same parental clone by the limiting dilution method, were performed in a bioreactor at pH values in the range of 6.8-7.6, and two different temperatures, $33^{\circ}C\;and\;37^{\circ}C$. In regard to cell growth, clone A and clone B displayed similar responses to temperature, although their degree of response differed. In contrast, clones A and B displayed different responses to temperature in regard to antibody production. In the case of clone A, no significant increase in maximum antibody concentration was achieved by lowering the culture temperature. The maximum antibody concentration obtained at $33^{\circ}C$(pH 7.4) and $37^{\circ}C$(pH 7.0) were $82.0{\pm}2.6$ and $73.2{\pm}4.1{\mu}g/ml$, respectively. On the other hand, in the case of clone B, an approximately 2.5-fold increase in maximum antibody concentration was achieved by lowering the culture temperature. The enhanced maximum antibody concentration of clone B at $33^{\circ}C$($132.6{\pm}14.9{\mu}g/ml$ at pH 7.2) was due to not only enhanced specific antibody productivity but also to prolonged culture longevity. At $33^{\circ}C$, the culture longevity of clone A also improved, but not as much as that of clone B. Taken together, CHO clones derived from the same parental clone displayed quite different responses to culture temperature and pH with regards antibody production, suggesting that environmental parameters such as temperature and pH should be optimized for each CHO clone.

• Journal of Applied Biological Chemistry
• /
• v.59 no.2
• /
• pp.159-164
• /
• 2016

Plant growth regulator is an essential pesticide to date while the available active ingredient is not well understood unlike fungicide, insecticide and herbicide. This study was aimed to evaluate a new chemical class of plant growth regulator, and the total of 92 benzene derivatives were screened for their germination and early stage of the root growth regulation on Brassica campestris. Thirty benzaldehydes, nine acids, one amide, and one ester showed potent root growth inhibitory activity (>70 % inhibition) while only salicylaldehyde showed potent germination inhibition ($IC_{50}=81.2mg/L$) suggesting that benzaldehyde was a key module candidate for the growth inhibition. Benzaldehydes were further evaluated for root growth inhibition. 2,3-Dihydroxybenzaldehyde and salicylaldehyde showed $IC_{50}$ values of 8.0 and 83.9 mg/L, respectively. On the other hand, salicylaldehyde, and 2,4,5-trihydroxybenzaldehyde were found to have root growth promotion effects less than 10 mg/L. This result suggests that the benzaldehyde is a new class candidate for plant growth regulator.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.645-652
• /
• 2016

The statistical modeling of input random variables is necessary in reliability analysis, reliability-based design optimization, and statistical validation and calibration of analysis models of mechanical systems. In statistical modeling methods, there are the Akaike Information Criterion (AIC), AIC correction (AICc), Bayesian Information Criterion, Maximum Likelihood Estimation (MLE), and Bayesian method. Those methods basically select the best fitted distribution among candidate models by calculating their likelihood function values from a given data set. The number of data or parameters in some methods are considered to identify the distribution types. On the other hand, the engineers in a real field have difficulties in selecting the statistical modeling method to obtain a statistical model of the experimental data because of a lack of knowledge of those methods. In this study, commonly used statistical modeling methods were compared using statistical simulation tests. Their advantages and disadvantages were then analyzed. In the simulation tests, various types of distribution were assumed as populations and the samples were generated randomly from them with different sample sizes. Real engineering data were used to verify each statistical modeling method.