• Journal of Korean Society on Water Environment
• /
• v.23 no.4
• /
• pp.535-542
• /
• 2007

The Geumho river watershed located in the middle of the Nakdong river has been threatened by high population growth and urbanization. Of concern specifically is the potential impact of future developments in the watershed on the reduction of base flow and the consequent risk of degradation of ecological habitats in Geumho river. Anticipated increase in imperviousness, on the other hand, is expected to elevate flood risk and the associated environmental damage. A watershed hydrology based modeling study is initiated in this study to assist in planning for sustainable future development in the Geumho river watershed. The Soil and Water Assessment Tool (SWAT) is selected to model the impact of urbanization in the Geumho river watershed on the hydrologic response thereof. The modeling results show that in general the likelihood that the watershed will experience high and low stream flows will increase in view of the urbanization so far achieved.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.11
• /
• pp.197-203
• /
• 1999

Increasing demands on precision machining have necessitated the tool to move not only position error as small as possible, but also with smoothly varying feedrates. Because of the lack of accurate and efficient algorithms for generation of 3-dimensional lines and circles, a full accomlishment for available machine tool resolution is generally unavailable. In this paper, a reference-pulse type 3-axis PC_NC milling system is developed for the precision machining of complex shapes in 3-dimensional space. Three AC servomotors are used as the actuator instead of the hand wheel to operate a 3-axis milling machine under the same mechanical structure. A PC is used to handle the control signal calculation for various types of motion command. To achieve the synchronous 3-axis motion, a real-time reference-pulse 3-dimensional linear and circular interpolator based on the intersection criteria is developed in software. The performance test via computer simulation and actual machining have shown that the PC-NC milling system is useful for the machining of arbitrary lines and circles in 3-dimensional space.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.3
• /
• pp.133-138
• /
• 2020

Interaction is an important component in the sense of immersion in augmented reality. However, the function of interaction in augmented reality contents is very weak. Bringing a lot of real environmental information is one of the ways to develop augmented reality, and interaction will naturally develop. In this paper, Leap Motion was used for natural interaction in augmented reality environment through the hand widely used as an interface tool, and extended more from the limited interaction of conventional display touch methods to create a natural interaction. This development of interaction will contribute to the development of various contents as well as augmented reality later.

• Journal of the Korean Society of Food Culture
• /
• v.23 no.5
• /
• pp.582-594
• /
• 2008

This study aimed at evaluating current sanitation management performances in Korean-Food restaurants by their operation types and to develop sanitary training posters based on the risk factors, in an attempt to improve the level of sanitation management in Korean food service facilities. Eighteen Korean-food restaurants that are managed by franchisor, franchisees as well as self-managed with large-scale and small-scale restaurants in Seoul and Gyeonggi-Do, were evaluated by on-the-spot inspectors with an auditing tool consisting of three dimensions, nine categories and thirty four items. Data were analyzed using SPSS. The total score of each group showed that restaurants managed by franchisees ranked the highest (59 out of 100 points), while self-managed, small-scale restaurants ranked the lowest (44 out of 100 points). In the categorization of sanitation management compliance, the dimensions of food hygiene during production recorded the lowest compliance rate of 47.7% (22.89/48.0 points) followed by the dimension of environmental hygiene 59.3% (20.17/34.0 points) and personal hygiene 60.5% (10.89/18.0 points). This indicated the need for urgent improvement. The items which showed the lowest compliance rates were 'proper thawing of frozen foods' (0%), 'notifying and observing heating/reheating temperature' (6%), 'using of hand-washing facility and proper hand-washing' (33%), 'monitoring temperature of frozen-foods and cold-foods' (35%), and 'prevention of cross-contamination' (36%) among thirty four items. Self-managed, small-scale restaurants, in particular, needed to improve sanitary practices such as 'sanitation education for employee', 'verifying the employee health inspection reports', 'storing food on the shelves 15 cm distance away from the wall', 'suitability of ventilation capacity of hoods' and 'cleanliness of drainage'. On the basis of the findings of this study, we developed sanitary training posters, especially for small-scale restaurant operators. This could be an effective tool to educate food service employees on sanitary knowledge and principles and could be used to improve the existing sanitary conditions in Korean food service facilities.

• Korean Journal of Oriental Medicine
• /
• v.18 no.3
• /
• pp.119-126
• /
• 2012

1. Objectives Sasang constitutional medicine is unique in Korean traditional medicine. It diagnoses and treats patients based on his/her Sasang constitution (SC). Skin properties have been used as an effective diagnostic component in the classification of SC types in clinics. In this paper, we investigated the SC-based health relevance of skin elasticity and wrinkle properties. 2. Methods The skin elasticity and wrinkle of forearm and dorsal hand were measured in 299 elderly female subjects. To determine the subject's Sasang constitution, we adopted the classification results from a newly developed SC diagnostic tool. The health states of the subjects were scored by two Korean traditional medical doctors, by whom each subject was categorized either into the healthy state or the unhealthy state. 3. Results As a result, the elasticity hysteresis of forearm (E_HYS), the visco-elasticity (VE_MEAN), and the wrinkle frequency energy of backhand (W_HAND) showed significant differences between Taeum-in group and Soeum-in group. In case of the Soeum-in on unhealthy state, VE_MEAN was decreased significantly (p<.05). W_HAND and W_ARM_H of the healthy Taeum-in were less than those of the unhealthy Taem-in. 4. Conclusions In this study we showed that, for an elderly female population, skin elasticity and viscosity were significantly different not only between each SC type but also between healthy group and unhealthy group in each constitution. In particular, Soeum-in subjects were inferred to be superior in retaining skin softness when they were healthy, and Taeum-in subjects were easy to lose their firmness of skin surface when they became unhealthy.

• Korean Journal of Oriental Medicine
• /
• v.14 no.3
• /
• pp.103-111
• /
• 2008

Recently, skin diagnosis has been suggested as a promising tool for discrimination of Sasang Constitution, reported by examining the skin characteristics such as thickness, stiffness, slip, and skin textures like wrinkles and furrows. However, the works had a limitation in that clinical decision on the skin characteristics was made by relying upon oriental medicine doctors' subjective sense of touch. In order to objectify the skin diagnosis and claim its efficacy on the discrimination of the Sasang Constitutions, it is necessary to demonstrate its discrimination capability by providing numerical values in terms of physical quantities obtained from measurements using today's sensors and equipment technologies, which motivated this work as a priliminary step towards objectification of skin diagnosis. The skin characteristics focused in this work is the slip property of the back-hand skin that has been exploited using the dynamic friction measurement system. First, curved geometric effects of the back-hand skin on the measured lateral/vertical force signals were estimated using the artificially designed silicon coated structures, which led to a suggestion on a quality controlled experimental design based upon a empirical analysis model. Second, the experimental design thus suggested has been applied to the measurement of dynamic friction coefficients for two healthy male subjects of Taeumin (TE) and Soyangin (SY), respectively. The result shows that the dynamic friction coefficient is less for the SY subject than for the TE subject around the area of the skin used for diagnosis by the oriental medicine doctor, implying the TE subject's skin is more slippery than the SE subject's that is consistent with the oriental medicine doctor's diagnosis. Hopefully, this work can provide guidelines for obtaining quality data in friction measurement to be collected for discussion on the efficacy of the skin diagnosis and its objectification through statistical analysis.

• Physical Therapy Rehabilitation Science
• /
• v.5 no.3
• /
• pp.143-148
• /
• 2016

Objective: This study aimed to quantify one of the useful upper extremity movements to evaluate motor control abilities between the groups of people with mild and moderate arm impairments performing a door handling task. Design: Cross-sectional study. Methods: Twenty-one healthy participants and twenty-one persons with chronic stroke (9 mild stroke and 12 moderate stroke) were recruited for this study. Stroke participants were divided into 2 groups based on Fugle-Meyer Assessment scores of 58-65 (mild arm) and 38-57 (moderate arm). All they performed door handling task including the pronation and supination phases 3 times. We measured some movement factors which were reaction time, movement time, hand of peak velocity, hand of movement units to perform door handling task using the three-dimensional motion analysis. Results: The majority of kinematic variables showed significant differences among study groups (p<0.05). The reaction time, total and phase of movement time, hand of peak velocity, the number of movement units discriminated between healthy participants and persons with moderate upper limb stroke (p<0.05). In addition, reaction time, total and phase of movement time, the number of movement units discriminated between those with moderate and mild upper limbs of stroke patients (p<0.05). Conclusions: Three-dimensional kinematic motion analysis in this study was a useful tool for assessing the upper extremity function in different subgroups of people with stroke during the door handling task. These kinematic variables may help clinicians understand the arm movements in door handling task and consist of discriminative therapeutic interventions for stroke patients on upper extremity rehabilitation.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.6
• /
• pp.553-563
• /
• 2014

Objective: The purpose of this study was to evaluate the effect of gender (male, female) and grip spans (45, 50, 60, 70, 80mm) on total grip strength, resultant force, finger force and subjective discomfort rating. Background: In order to prevent musculoskeletal disorders, studies of hand tools need to be preceded based on grip strength, finger force, and subjective discomfort rating. However, experimental apparatus using tools such as pliers that reflect the actual work place was almost non-existent. Method: Fifty-Two (26 males and 26 females) participants were recruited from the student population. In this study, a pair of revised pliers, which can change grip span from 45 to 80mm was applied to estimate total grip strength, resultant force and individual finger forces. All participants were asked to exert a maximum grip force with three repetitions, and to report the subjective discomfort rating for five grip spans of pliers (45, 50, 60, 70, 80mm). Results: There were significant differences of total grip strength, resultant force, individual finger forces and subjective discomfort rating according to grip span. The lowest total grip strength was obtained from the grip span of 80mm for both genders. For resultant force, the highest resultant force was exerted at grip spans of 50, 60 and 70mm for females and 50 and 60mm for males. The lowest subjective discomfort rating was observed in the 50mm for both genders. Conclusion: Based on the result, 50mm and 60mm grip spans which provide the highest force and lowest discomfort rating might be recommendable for the male and female pliers users. Application: The findings of this study can provide guidelines on designing a hand tool to help to reduce hand-related musculoskeletal disorders and obtain better performance.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.4
• /
• pp.117-136
• /
• 2014

The purpose of this study is to present a classification system of the hand-made and machine-made lace according to the configuration method and re-make the category and definition of lace to consider the emergence and development of major laces techniques. The re-made category and definition of the lace is as follows. The lace usually consists of ground and motifs, however, the techniques of netting and sprang are suitable for making ground than motif, so I think it is appropriate to exclude them from the category of the lace. Many scholars are excluded openwork embroidery fabric from the category of the lace. But, an openwork embroidery fabric is the basis of a needle point lace called true lace and is consist of motif and ground. I think it is appropriate to include it in the category of the lace. I think it is also appropriate to include in the category of the lace that the eyelet embroidery fabric which mimics the openwork embroidery fabric in the machine. Lace is redefined that a fabric with openwork decoration consists of motif and ground, constructed by a variety of ways such as plaiting, twisting, looping, knotting of threads or embroidering by hand or machine. The classification of the lace is presented as follows. Hand-made lace is classified bobbin lace, needle point lace, embroidery lace, knotted lace, crochet lace, and knitting lace. Machine-made lace is classified raschel lace, leaver lace, torchon lace, and machine-made embroidery laces which include tool lace, eyelet embroidery lace, chemical lace, etc.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6160-6168
• /
• 2015

Hand hygiene(HH)of the health care personnels(HCPs) was the most effective method to prevent the transmission of healthcare associated infections. This study was conducted to measure and analysis the status of the HH compliance of HCPs. Data were collected by the direct observation methods of the World Health Organizations(WHO) using WHO's HH monitoring tool kits from 25th October to 31th December, 2010. Data were analyzed by descriptive statistics, cross analysis, multiple logistic analysis using the SPSS/PC 21 program. A total of 8,644 opportunities for HH were observed, and the overall HH compliance rate was 94.1%. HH rates of physicians was lowest(83.4%; OR: 0.209, 95%CI:0.174-0.252). HH rates were statistically different by the job titles(p<0.001), WHO's 5 moments(p<0.001). HH rates in registered nurses(p=0.003), and medical technicians(p<0.001) were statistically different by the WHO 5Moments. Jobs specific HH strategies and WHO 5Moments should be developed to increase the HH compliances of the HCPs.