• Journal of Broadcast Engineering
• /
• v.18 no.3
• /
• pp.409-415
• /
• 2013

Recently, various equipments have been developed for convenience of presentations. Presentation equipments added the keyboard and mouse functions to laser pointer and devices have become main method. However these devices have demerits of limited action and a few events. In this paper, we propose a method which increases the degrees of freedom of presentation as the control of the hand by using a depth camera. The proposed method recognizes the horizontal and vertical positions of hand pointer and the distance between hand and camera from both depth and RGB cameras, then performs a presentation event as the location and pattern that the hand touches a screen. The simulation results show that a camera is fixed on left side of the screen, and nine presentation events is correctly performed.

• Transactions of Materials Processing
• /
• v.27 no.5
• /
• pp.281-288
• /
• 2018

This study deals with the microstructure and tensile properties of 600 and 700 MPa-grade high-strength seismic reinforced steel bars. High-strength seismic resistant reinforced steel bars (SD 600S and SD 700S) were fabricated by TempCore process, especially the SD 700S specimen was more rapid cooled than the SD 600S specimen during the TempCore process. Although two specimens had microstructure of tempered martensite in the surface region, the SD 600S specimen had ferrite-degenerated pearlite in the center region, whereas the SD 700S specimen had bainite-ferrite-degenerated pearlite in the center region. Therefore, their hardness was highest in the surface region and revealed a tendency to decrease from the surface region to the center region because tempered martensite has higher hardness than ferrite-degenerated pearlite or bainite. The SD 700S specimen revealed higher hardness in the center region than SD 600S specimen because it contained a larger amount of bainite as well as ferrite-degenerated pearlite. On the other hand, tensile test results indicated the SD 600S and SD 700S specimens revealed continuous yielding behavior because of formation of degenerated pearlite or bainite in the center region. The SD 600S specimen had a little higher tensile-to-yield ratio because the presence of ferrite and degenerated pearlite in the center region and the lower fraction of tempered martensite enhance work hardening.

• The Journal of Fisheries Business Administration
• /
• v.46 no.1
• /
• pp.1-13
• /
• 2015

This study is aimed comparative analysis for business performance of land-based ezo abalone (Haliotis discus hannai) seed farms by standardizing cost structures by region and farming size. The result of survey on average farming incomes by region showed that farming incomes in Haenam and Jindo regions were much higher than those in other regions. Followed by Wando region, incomes in other regions were analyzed to be relatively lower. It is shown that farming incomes became higher as farm size increased. Farming incomes per unit size which were modified from farming incomes by region were highest in Jindo region, followed by East sea region, Wando and Haenam regions. Incomes in Jeju and Yeosu regions were analyzed to be relatively lower. Results on farming incomes per unit size ($m^2$) showed that both farming incomes and profits became higher as size increased. It implies that a scale effectiveness might exist in case of land-based abalone culture system. Impacts of major factors on farming profits and returns on investment in abalone seed aquaculture are summarized as follow. First, only if the survival rate increased by 10% with improvement of component ratio, variable effects became largest. In variable effects of other factors, a variation in Jindo region was largest and on the other hand, a variation in Yeosu region was shown to be smallest.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.5
• /
• pp.367-372
• /
• 2005

In this paper, we proposed a method of content-based image retrieval using variable region. Content-based image retrieval uses color histogram for the most part. But the existing color histogram methods have a disadvantage that it reduces accuracy because of quantization error and absence of spatial information. In order to overcome this, we convert color information to HSV space, quantize hue factor being pure color information, and calculate histogram of the factor. On the other hand, to solve the problem of the absence of spatial information, we select object region in consideration of color feature and region correlation. It maintains the size of region in the selected object region. But non-object region is integrated in one region. After of selection variable region, we retrieve using color feature. As the result of experimentation, the proposed method improves 10$\%$ in average of precision.

• Journal of Environmental Science International
• /
• v.9 no.5
• /
• pp.375-384
• /
• 2000

It is very important to interprete and simulate the variation of phytoplankton maximum region for the prediction and control of red tide. This study was composed of two parts first the hydrodynamic simulation such as residual current and salinity diffusion and second the ecological simulation such as phytoplankton distribution according to freshwater discharge and pollutant loads. Without the Nakdong river discharge residual current was stagnated in inner side of this estuary and surface distribution of salinity was over 25psu. On the contrary with summer mean discharge freshwater stretched very far outward and some waters flowed into Chinhae Bay through the Kadok channel and low salinity extended over coastal sea and salinity front occurred. From the result of contributed physical process to phytioplankton biomass the accumulation was occurred at the west part of this estuary and the Kadok channel with the Nakdong river discharge. When more increased input discharge the accumulation band was transported to outer side of this estuary. The frequently outbreak of red tide in this area is caused by accumulation of physical processes. The phytoplankton maximum region located inner side of this estuary without the Nakdong river discharge and with mean discharge of winter but it was moved to outer side when mean discharge of the Nakdong river was increased. The variation of input concentration from the land loads was not largely influenced on phytoplankton biomass and location of maximum region. When discharge was increased phytoplankton maximum region was transferred to inner side of the Kadok channel. ON the other hand when discharge was decreased phytoplankton maximum region was transferred to inner side of this estuary and chlorophyll a contents increased to over 20$\mu\textrm{g}$/L Therefore if any other conditions are favorable for growth of phytoplankton. decreas of discharge causes to increase of possibility of red tide outbreak.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.6
• /
• pp.705-716
• /
• 2002

This paper proposes a method which visualizes MRI head data in 3 dimensions with direct volume rendering. Though surface rendering is usually used for MRI data visualization, it has some limits of displaying little speckles because it loses the information of the speckles in the surfaces while acquiring the information. Direct volume rendering has ability of displaying little speckles, but it doesn't treat MRI data because of the data features of MRI. In this paper, we try to visualize MRI head data in 3 dimensions as follows. First, we separate the brain region from the head region of MRI head data, next increase the pixel level of the brain region, then combine the brain region with the increased pixel level and the head region without brain region, last visualizes the combined MRI head data with direct volume rendering. We segment the brain region from head region based on histogram threshold, morphology operations and snakes algorithm. The proposed segmentation method shows 91~95% similarity with a hand segmentation. The method rather clearly visualizes the organs of the head in 3 dimensions.

• Environmental and Resource Economics Review
• /
• v.33 no.1
• /
• pp.87-112
• /
• 2024

This study estimates the regional input-output table and GHG emissions in 2019 and then analyzes the economic effects of carbon taxes by region and industry in Korea. The GHG emission, emission coefficient, and emission induction coefficient are estimated to be higher in manufacturing-oriented metropolitan provinces. The GHG emission coefficient in the same industry varies from region to region, which might reflect the standard of product classification, characteristics of production technology, and the regional differences in input structure. If a carbon tax is imposed, production costs are expected to increase and demand and production will decrease, especially in the manufacturing industry, which emits more GFG. On the other hand, the impact of carbon taxes on each region is not expected to vary significantly from region to region, which might be due to the fact that those differences are mitigated by industry-related effects. Since the impact of carbon taxes is expected to spread to the entire region, close cooperation between local governments is necessary in the process of implementing carbon neutrality in the future.

• Journal of the Korean Geographical Society
• /
• v.37 no.2
• /
• pp.111-130
• /
• 2002

Major purposes of this stud? are to analyze Korean firms'innovation networks and sources of knowledge for innovation and to understand their spatial dimensions. In the innovation networks, parent firms are most important for subcontracting firms, while suppliers, customers and competitors are relatively important for independent firms. However, in the future innovation networks, it is expected that government-sponsored research institutions and university wilt become more important on the one hand, networks with foreign firms will become more important on the other hand. Regarding the process of innovation, distance does not matter for the acquisition of codified knowledge. Spatial proximity is, however, critical for the acquisition of tacit knowledge because discussions and researches in a research division within a firm, personal networks of CEO and workers who are responsible for innovation activity, and inter-firm relations with suppliers and customer in a region are regarded important as sources of tacit knowledge. Overall, the innovation networks are different between the Capital Region and non-Capital Region as well as between the industrial complex and non-industrial complex, suggesting that different regional innovation strategies and policies should be established and implemented by considering such regional specificities. Finally, based on the results of this study several policy implications are suggested.

• Atmosphere
• /
• v.27 no.1
• /
• pp.55-65
• /
• 2017

This study investigates how Eurasian snow cover in spring (March and April) is associated with Korean temperature during summer (June-July-August). Two leading modes of Eurasian snow cover variability in spring for 1979~2015 are obtained by Empirical Orthogonal Function (EOF) analysis. The first EOF mode of Eurasian snow cover is characterized by a zonally elongated pattern over the whole Eurasian region and its principal component is more correlated with Korean temperature during June. On the other hand, the second EOF mode of Eurasian snow cover is characterized by an east-west dipole-like pattern, showing positive anomalies over eastern Eurasian region and negative anomalies over western Eurasian region. This dipole-like pattern is related with Korean temperature during August. The first leading mode of Eurasian snow cover is associated with anomalous high (low) pressure over Korea (Sea of Okhotsk) during June, which might be induced by much evaporation of soil moisture in Eurasia during March. On the other hand, the second mode of Eurasian snow cover is associated with a wave train resembling with Eurasian (EU)-like pattern in relation to the Atlantic sea surface temperature forcing, leading to the anomalous high pressure over Korea during August. Understanding these two leading modes of snow cover in Eurasian continent in spring may contribute to predict Korean summer temperature.

• Biomolecules & Therapeutics
• /
• v.8 no.2
• /
• pp.153-159
• /
• 2000

A novel serine/threonine protein phosphatase with EF-hand motif, which belongs to PPEF family was partially cloned from rat brain cDNA by employing RT-PCR method. The size of the amplified clone was 1.6kbp. The amplified DNA was subcloned into pGEM-T-Easy vector and the resulting plasmid was maned as pGEM-rPPEF2. The nucleuotide sequence is shared by 88% with that of mouse PPEF-2 cDNA, and the deduced amino acid sequence reveal 92% homology with that of mouse PPEF-2 cDNA. The N-terminal region of the cloned rat brain PPEF contains a putative phosphatase catalytic domain (PP domain) and the C-terminal region contains multiple $Ca^{2+}$ binding sites (EF region). The putative catalytic domin (PP) and the EF-hand motif (EF) regions were subcloned into pGEX4T-1 and were overexpressed in E. coli DH5 as glutathione-S-transferase (GST) fusion proteins. Expression of the desired fusion protein was identified by SDS-PAGE and also by immunoblot analysis using monoclonal antibody against GST. The recombinant proteins were purified by glutathione-agarose chromatography. This report is first to demonstrate the cloning of PPEF family from rat brain tissues. The clone reported here would be invaluable for the investigation of the role of this new type-phosphatase in rat brain.