• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.463-466
• /
• 2002

A new type of LCD has been developed using recently developed phase separated composite film method with a single glass substrate. The resultant structures are made of adjacent parallel layers of liquid crystal and polymer. The LC layer is confined between the solidified polymer layer and glass substrate. The electra-optical properties of the display have been investigated. This technique has the potential to realize a lightweight display for hand-held portable electronic products.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.326-329
• /
• 1995

PID control has been widely used for real control system Further, there are muchreasearches on control schemes of tuning PID gains. However, there is no results for discrete-time systems with unknown time-dealy and unknown system parameters. On the other hand, Generalized predictive control has been reported as a useful self-tuning control technique for systems with unknown time-delay. So, in this study, based on minimization of a GPC criterion, we present a self-tuning PID control algorithm for unknown parameters and unknown tiem-delay system. A numerical simulation was presented to illuatrate the effectiveness of this method.

• Journal of the Korea Society for Simulation
• /
• v.13 no.2
• /
• pp.45-52
• /
• 2004

This paper presents a prototype visualization system of mixed reality for a VR flight simulator. The chroma key technique is used to build the mixed reality model for a VR flight simulator. The Daedeok science town can be visualized in real time according to the rider control. He can also see his own hand/foot operating the control stick/rudder as well as virtual environment projected to the blue-screen using a video-see-through HMD.

• Tribology and Lubricants
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2003

Recently, PM-high speed steel(PM-HSS) has reportedly been a good alternative material for rolling mill because of its superior performance to conventional HSS. This paper has been aimed to investigate the possibility for application to rolling contact element for PM-HSS by X-ray diffraction technique. The X-ray elastic constant for PH-HSS has been found by X-ray diffraction during the four-point bending test. Residual stress and half-value breadth on the contact surface during rolling contact fatigue process by X-ray diffraction have also been measured. The result of this study shows that the application of X-ray diffraction technique to PM-HSS could be as possible alternative material as conventional HSS. Half-value breadth on rolling contact surface by X-ray diffraction is not changed during rolling contact fatigue process. On the other hand, the residual stress is changed. This suggests that dislocation reaction has been hardly occurred in rolling contact, depending on super-saturated carbon in PM-HSS.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2352-2355
• /
• 2003

In recent yeas, studies on computer aided diagnosis (CAD) using image analysis on CT images have been conducted with respect to various diseases. Extracting ground-glass opacities (GGO) on lung CT images is one of such subjects, though it has not found an established method yet. If the region of ground-glass opacities is large on CT images, it can be detected without much difficulty. On the other hand, if the region is small, it is still difficult to find it exactly. In the latter case, increasing overlooking possibility cannot be avoided according to smaller size of the region. To solve this difficulty, this paper proposes an automatic technique for extracting ground-glass opacities on lung CT images employing some statistical parameters of a gray level histogram and a differential histogram. The proposed technique is applied to some lung CT images in the performed experiment. The results are shown with discussion on future work.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.841-845
• /
• 1991

There are Carrier Current Communication or Power line Carrier (PLC) Communication conducted data exchange using power line Which is installed existing indoor. Power line is possible to construct data link economically, on the other hand, have an inferior transmission environment such as irregular noise and severe level variation. The purpose of this paper is to present transmission possibility for PLC using spread spectrum technique. In the initial synchronization, established computer simulation for the S/N in relation to PN code generator. By using this result, construct the prototype SS system and then experiment the transmission characteristics.

• Journal of Conservation Science
• /
• v.5 no.2 s.6
• /
• pp.57-64
• /
• 1996

Korean Paintings have been drawn on in the main two types of support material - paper and silk. In these things, silk designates picture silk, that of a specially weaved textile for painting since CHO-SUN dynasty, different such as hemp, ramie have been started to use for support material In addition to picture silk. However the structure of hemp and ramie are so close and progue, They are not proper to express the technique of pigments on the back of the paintings. On the other hand, picture silk is efficacious in pigments on the back of the painting with its interval between the strands and translucent textile. As the result, paintings on the silk has many - sided techniques as compared with painting on the papers therfore various devices in conservation have to be considered to deal with the techniques. In this report the focus is on classifying the method of removing the Lining paper according to the several types of expression technique of paintings on the silk.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.4
• /
• pp.246-250
• /
• 2014

Large mutual capacitance touch screen panels (TSP) are susceptible to display and ambient noise. This paper presents a multi-touch detection algorithm using an efficient noise compensation technique for large mutual capacitance TSPs. The sources of noise are presented and analyzed. The algorithm includes the steps to overcome each source of noise. The algorithm begins with a calibration technique to overcome the TSP mutual capacitance variation. The algorithm also overcomes the shadow effect of a hand close to TSP and mutual capacitance variation by dynamic threshold calculations. Time and space filters are also used to filter out ambient noise. The experimental results were used to determine the system parameters to achieve the best performance.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.84-87
• /
• 2001

The high speed machining which cam improve the production and quality has been remarkable in die/mold industry with the growth of parts and materials industries. The speed of machine tool increases, but on the other hand, the response of sensors I not being improved. Therefore, the condition monitoring techniques for the machine too, tool and workpiece in high speed machining are incomplete. In this study, characteristics of the tool edge roughness were verified from the high frequency components of cutting force signals acquired by the high speed dynamometer. Also, the experimental evaluation technique for the machinability and condition monitoring in high speed machining was established by analyzing the cutting force, acceleration and surface roughness.

• Journal of Electrochemical Science and Technology
• /
• v.7 no.1
• /
• pp.13-26
• /
• 2016

Nanoparticles (NPs), which have been investigated intensively as electrocatalysts, are usually synthesized by chemical methods that allow precise size and shape control. However, it is difficult to control the components and compositions of alloy NPs. On the other hand, the conventional physical method, sputtering with solid substrates, allows for facile composition control but size control is difficult. Recently, “liquid medium sputtering” has been suggested as an alternative method that is capable of combining the advantages of the chemical and conventional physical methods. In this review, we will discuss NP synthesis via the liquid medium sputtering technique using ionic liquid and low-volatile polymer media. In addition, potential applications of the technique, including the generation of oxygen reduction reaction electrocatalysts, will be discussed.