• 전자공학회논문지SC
• /
• 제42권3호
• /
• pp.71-80
• /
• 2005

본 논문에서는 새로운 하프브리지 공진형 인버터 토폴로지와 디지털 제어회로를 제안하였다. 제안된 인버터는 부하환류 모드를 제공함으로써 펄스폭 변조방식을 통해 출력을 제어할 수 있다. 따라서 부하측 고유 공진주파수를 추종하는 PWM 제어가 적용될 경우, 부하측 임피던스가 변화하는 조건하에서도 인버터 출력단의 변위율을 항상 1로 유지할 수 있다. 본 논문에서는 제안된 하프브리지 공진형 인버터의 동작원리와 전기적 특성 및 통상의 하프브리지 인버터와 비교한 손실해석에 대하여 고찰하였고, 제안된 알고리즘을 구현하기 위한 디지털 제어회로를 제시하였다. 또한 제안된 인버터의 유효성을 확인하기 위한 실험을 통해서 얻은 결과를 제시하였다.

• Computers and Concrete
• /
• 제27권3호
• /
• pp.199-210
• /
• 2021

The aim of this paper was to examine the continuous and discontinuous contact problems between the functionally graded (FG) layer pressed with a uniformly distributed load and homogeneous half plane using an analytical method and FEM. The FG layer is made of non-homogeneous material with an isotropic stress-strain law with exponentially varying properties. It is assumed that the contact at the FG layer-half plane interface is frictionless, and only the normal tractions can be transmitted along the contacted regions. The body force of the FG layer is considered in the study. The FG layer was positioned on the homogeneous half plane without any bonds. Thus, if the external load was smaller than a certain critical value, the contact between the FG layer and half plane would be continuous. However, when the external load exceeded the critical value, there was a separation between the FG layer and half plane on the finite region, as discontinuous contact. Therefore, there have been some steps taken in this study. Firstly, an analytical solution for continuous and discontinuous contact cases of the problem has been realized using the theory of elasticity and Fourier integral transform techniques. Then, the problem modeled and two-dimensional analysis was carried out by using ANSYS package program based on FEM. Numerical results for initial separation distance and contact stress distributions between the FG layer and homogeneous half plane for continuous contact case; the start and end points of separation and contact stress distributions between the FG layer and homogeneous half plane for discontinuous contact case were provided for various dimensionless quantities including material inhomogeneity, distributed load width, the shear module ratio and load factor for both methods. The results obtained using FEM were compared with the results found using analytical formulation. It was found that the results obtained from analytical formulation were in perfect agreement with the FEM study.

• 대한전자공학회논문지TC
• /
• 제47권1호
• /
• pp.77-83
• /
• 2010

여러 가지 기판 두께에서 $5{\times}4$ 핀 배열 패치 안테나와 $5{\times}2$ 핀 배열 패치 안테나의 방사특성을 전산모의한 결과를 비교하였다. $5{\times}2$ 핀 배열 패치 안테나는 $5{\times}4$ 핀 배열 패치 안테나와 비교하면 단위 셀의 개수가 반으로 줄어 사용하는 핀의 개수가 반으로 줄며 패치 폭의 크기도 크게 감소하나 전방방사 이득과 수평방향 방사 억제와 같은 방사특성은 매우 비슷함을 볼 수 있었다.

• 한국전자파학회논문지
• /
• 제20권1호
• /
• pp.83-90
• /
• 2009

본 논문에서는 상호 평행하는 두 개의 도체 평판의 슬릿을 통한 전자파 투과 문제를 고려하였다. TM 편파된 평면파가 슬릿에 입사되었을 때 각 슬릿의 등가 자류를 미지수로 하는 결합 적분방정식을 유도하고 모멘트 방법으로 풀어 수치해석하였다. 슬릿의 폭, 도체 평행 평판의 간격, 평면파의 입사각, 슬릿간 변위 등에 따른 슬릿을 통해 투과된 전력의 변화를 계산하였다. 두 슬릿간 변위가 반 파장의 정수배에 근접할 때 투과 공진(최대 전력 투과)현상이 관찰되었다. 슬릿의 폭과 도체판 간격이 파장에 비해 매우 좁은 경우 투과 전력의 최대치는 슬릿의 폭과 입사각도에 무관하게 일정함을 확인하였다. 또한, 제안된 구조에서 일어나는 투과 공진 현상의 원리를 단순화된 구조와 등가회로를 통해 설명하였다.

• 비파괴검사학회지
• /
• 제33권2호
• /
• pp.219-225
• /
• 2013

자왜방식 원거리 초음파검사의 최적화된 개별 응용들을 위해, 분리되어 적층된 송수신 나선형 코일 배열들이 사용되어 왔었다. 본 연구에서는 기존에 비해 반으로 줄어든 다리 폭을 갖는 나선형 코일들과 이 다리 폭 감소에 기인한 빈 공간들을 활용할 때, 보다 쉬운 사용과 제조를 허용하는 단층 구조를 형성하도록 송수신 코일들이 배열될 수 있다는 것을 실증하였다. 다리 폭에 비례하는 수신코일의 감은 수 때문에 단층 코일 배열의 감도는 대응되는 이층 코일 배열의 그것의 반 정도이었지만 이는 메인-뱅(main bang) 에코로 인한 포화로부터 수신증폭기의 보다 빠른 회복을 허용하였다. 또한 지향성 조종과 SNR(signal-to-noise ratio)의 관점에서는 이 두 종류의 코일 배열들이 거의 같은 성능을 갖는 것으로 밝혀졌다.

• 한국농공학회지
• /
• 제18권2호
• /
• pp.4096-4104
• /
• 1976

This experiment was carried out to investigate the efficient turning method which will be able to use every cutting methods, to calculate the width of the center field which must transpose from rotary cutting method to return cutting method, to investigate the effects of L/W and unit field on the operation efficiency. The results are summarized as follows: 1. In case of cutting in the outer field, the efficient turning method is the "$\alpha$" type turning method (half U-shaped turning method) at the first rotation, is the "$\beta$" type turning method (T-shaped turning method) at the second to fourth rotation. 2. In case of cutting in the inner field, the efficient turning method which takes the least turning time is the "a" type turning method ($\Delta$-shaped turning method). 3. The width of the center field (W') changes by the length-width ratio (L/W) and width (W), W' is 9.0m in case that L/W is 2.5 and W is 30m. 4. The larger L/W and area of unit field (A) become, the more operation efficiency (E) increases, and the limits that E is affected signicantly by L/W is 2 to 3.5 and A is within 5,000$m^2$. within 5,000$m^2$.

• 전기의세계
• /
• 제31권1호
• /
• pp.50-58
• /
• 1982

As a method for improving the power factor and the waveform of ac line current drawn by ac to dc converters, converters of pulse-width control type with forced commutation circuits have been developed in recent years. However, these converters have rather complex commutation circuits which contain auxiliary thyristors in addition to the main thyristors, and their performance is not satisfactory. This paper proposes a new pulse-width controlled ac to dc converter, and analyses its commutation mechanism and its input and output characteristics. The proposed converter circuit consists of a usual thyristor bridge circuit with series diodes to which reactors and diodes are added. This circuit dose not contain auxiliary thyristors, and in this sense it is simpler than the previous converter circuits of pulse-width control type. Since the main thyristors of the converter can be forcedly turned off several times in a half cycle of source voltage, a pulse-width modulation control is possible in order to improve the current waveform as well as the power factor on ac line side. As to dc output side it is shown that the adjustable range of output voltage is wide and the voltage regulation is good due to a rapid reversal of voltage across the commutating capacitors by LC resonance during commutation period. It is also shown that the regenerative operation of the converter is possible.

• 구강회복응용과학지
• /
• 제16권2호
• /
• pp.79-92
• /
• 2000

The purpose of this study was to estimate the morphology and the size of permanent maxillary molar in Korean Adult. The 100 dental college students with a normal dentition and without any dental prosthesis and severe caries were selected for this study. The subjects were taken impression to make study model. On the study model, authour three times measured those sizes and estimated morphological structures with a calipers, a Boley gauge and a protractor. The results were as follows; 1. In the maxilary first molar's clinical crown height, mesiolingual cusp height was 6.34mm, mesiobuccal cusp height was 6.05mm, distobuccal cusp height was 5.20mm. And in the maxillary second molar's clinical crown height, mesiobuccal cusp height was 5.85mm, mesiolingual cusp height was 5.71mm, distobuccal cusp height was 5.51mm, distolingual cusp height was 3.53mm. This result considered that the maxillary first molar inclined to distobuccal, and the maxillary second molar more upright than the maxillary first molar. 2. In the width of clinical crown, the maxillary first molar was 10.43mm, the maxillary second molar was 10.20mm, and the difference between the first molar's width and the second molar's width was 0.23mm. 3. The crown thickness was measured divided into mesial buccolingual half and distal buccolingual half. The mesial buccolingual half was 11.14mm, and distal buccolingual half was 10.35mm in the maxillary first molar, and in the maxilary second molar, mesial buccolingual half was 11.25mm, and distal buccolingual half was 9.72mm. This result considered that height of convergency located in mesial half of crown. 4. In the buccal groove length, total length and ratio, the maxillary first molar was 52.5%, the maxillary second molar was 50%. And the development of buccal groove in the maxillary first molar was 59% in case of the well developed buccal groove and 41% in case of the weak developed one. And frequency of buccal pit of the maxillary first molar was 12.5%. Whereas, the frequency of buccal of the well developed buccal groove in the maxillary second molar was 37% and that of the weak developed one was 63%. And frequency of buccal pit of the maxillary second molar was not seen. 5. The 3 cusp type tooth cannot be found in the maxillary first molar and the frequency of 3 cusp type tooth in the maxillary second molar was as small as 6% 6. In the case of 4 cusp type tooth, the size of distal lingual cusp molar was difference between in the maxillary first molar and in the maxillary second molar by about 1mm. 7. The intercuspal distance was similar in the maxillary first premolar and second molar. And intercuspal distanc of mesial half of the maxillary first molar and the maxillary second molar was silmillar, too. 8. The an measurement of occlusal surface in 4 cusp type tooth showed that the angle of occlusal surface between the distobuccal and mesiolingual was an obtuse angle, and the angle of occlusal surface between mesiobuccal and distolingual was an acute angle in the both cases of maxillary first and second molar. 9. The measurements of the development of Carabelli cusp showed that the frequency of the well developed one was 7% and that of the weak developed one was 56% in the maxillary first molar. And there cannot be found the well developed one and can be found 2.5% only in the case of the weak developed one in the maxillary second molar. 10. The well developed oblique ridge in the maxillary first molar showed the 100% frequency and that in the maxillary second molar showed the 85.5% frequency. The frequency of mesiomarginal ridge tubercle in the maxillary first molar was 82% and that in the maxillary second molar was 30.5%. And the frequency of distal accessory tubercle in the maxillary first molar can be seen about 19% and that in the maxillary second molar can be seen about 12%.

• 대한치과보철학회지
• /
• 제37권2호
• /
• pp.242-255
• /
• 1999

The purpose of this study was to estimate the morphology and the size of permanent mandibular molar in Korean Adult. The 100 dental college students with a normal dentition and without any dental prosthesis and severe caries were selected for this study The subjects were taken impression to make study model. On the study model, the 5 dentists measured those sizes and estimated morphological structures with a calipers, a Boley gauge and a protractor. The results were as follows; 1. The clinical crown height, width, thickness and the other anatomical structures had symmetrical relationship between the left and right mandibular molar. 2. In the clinical crown height aspect, the buccal crown heights always were higher than the lingual crown height. The heights of the each surface, the buccal or lingual surface, were gradually decreased from the 1st molar to the 2nd molar and the difference on the buccal surface was higher than that on the lingual surface. 3. In the clinical crown width aspect, the mesiodistal measurement of the mandibular 1st molar was higher than that of the mandibular 2st molar. 4. In the clinical crown thickness aspect, the mesial buccolingual measurement was highest on the mandibular 1st molar and the distal buccolingual distance was lowest on the mandibular 2nd molar. This distal thickness of the mandibular molar always was higher than that of the mesial half. 5. The well-developed mesiobuccal groove of the 1st molar was observed more often than that of the 2nd molar. The buccal pit was also observed more frequently at the 1st molar, but the frequency(35%) was not high. 6. The occlusal type according to the number of cusp was almost 5-cusp(98%) in the 1st molar and was also 5-cusp(63%) in the 2nd molar. The frequency of the 6th cusp was 31% in the 1st molar and was 22% in the 2nd molar. The frequency of the 7th cusp was below 2of in the both teeth. 7. In the buccolingual intercuspal distance aspect of the mesial and distal half, the intercuspal distance of distal half was higher than that of the mesial half on the 1st and 2nd molar, but the difference on the 1st molar was higher than that on the 2nd molar. 8. The difference between the widths of the buccal and lingual half was 1.5mm in the 1st molar and 0.8mm in the 2nd molar. Therefore the lingual convergency of the occlusal surface was more higher in the 1st molar. 9. On the mandibular 1st and 2nd molar, the distobuccal external angle was more acute than the mesiobuccal external angle. But the mesiobuccal internal angle was more acute than the distobuccal internal angle. 10. When the mandibular molar was a 5-cusp type, the development of the distal cusp on the 1st molar was better than that on the 2nd molar. The difference between the cusps was around 0.4mm.

• International Journal of Automotive Technology
• /
• 제7권7호
• /
• pp.833-839
• /
• 2006

In this paper, roll behavior of three planar half car models are compared. The first model is a simple model whose contact point between a wheel and the ground is assumed to be fixed with a revolute joint. The second model is a modified model of the fIrst model, whose wheel tread width can vary. In this model, the instant center of a wheel with respect to the ground, which is crucial to find the roll center, is assumed to be at the contact point of a wheel and the ground. The last model uses the pole of a wheel with respect to the ground for small displacement as the instant center of a wheel with respect to the ground. Loci of the center of gravity point, the fixed and the moving centrodes which are traces of roll center position in the ground and the body frame respectively, wheel contact points, and instant centers of a wheel with respect to the ground are calculated.