• Journal of the Korean Data and Information Science Society
• /
• v.21 no.5
• /
• pp.901-908
• /
• 2010

A geometrical description method is proposed to represent the process of the forward selection and backward elimination methods among many variable selection methods for multiple regression models. This graphical method shows the process of the forward selection and backward elimination on the first and second quadrants, respectively, of half circle with a unit radius. At each step, the SSR is represented by the norm of vector and the extra SSR or partial determinant coefficient is represented by the angle between two vectors. Some lines are dotted when the partial F test results are statistically significant, so that statistical analysis could be explored. This geometrical description can be obtained the final regression models based on the forward selection and backward elimination methods. And the goodness-of-fit for the model could be explored.

• Journal of Mechanical Science and Technology
• /
• v.20 no.5
• /
• pp.675-680
• /
• 2006

This is a study of fatigue strength of weld deposits with transverse cracks in plate up to 50 mm thick. It is concerned with the fatigue properties of welds already with transverse cracks. A previous study of transverse crack occurrence, location and microstructure in accordance with welding conditions was published in the Welding Journal (Lee et al., 1998). A fatigue crack develops as a result of stress concentration and extends with each load cycle until fatigue occurs, or until the cyclic loads are transferred to redundant members. The fatigue performance of a member is more dependent on the localized state of stress than the static strength of the base metal or the weld metal. Fatigue specimens were machined to have transverse cracks located on the surface and inside the specimen. Evaluation of fatigue strength depending on location of transverse cracks was then performed. When transverse cracks were propagated in a quarter-or half-circle shape, the specimen broke at low cycle in the presence of a surface crack. However, when the crack was inside the specimen, it propagated in a circular or elliptical shape and the specimen showed high fatigue strength, enough to reach the fatigue limit within tolerance of design stresses.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.6
• /
• pp.667-674
• /
• 2015

This paper describes the development of a prototype hexapod robot with six circular legs to overcome a variety of challenging terrains. The legs of the robot are very important for stability during walking, which are analyzed for determining the optimal design parameters through CAE tools. Its control system consists of three types of sensors, microprocessors, and communication modules for PC interface. The entire operation of the robot can be controlled and monitored using a PC. The experimental operations for three different roads verified the feasibility of the prototype robot for carrying out reconnaissance on multi terrain. In the near future, the prototype robot can be used for a military purpose of detecting and informing a potential risk in advance.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.2
• /
• pp.215-231
• /
• 2023

This study classifies short front long back skirts from the Joseon Dynasty by style type, identifies their formative characteristics based on their external morphological properties and internal composition, and examines their correlation with Korean thought. A literature review and empirical research were conducted for this study. The style of short front long back skirts is classified as inverted "b"-shaped, lower lip, wavy, trapezoid with a raised center hem, or half-circle. As such, this skirt possesses the formative properties of imbalance, variability of shape, intentional three-dimensionality, and confluence. In other words, with an imbalance resulting from the difference in length between the front and back, these skirts are characterized by variability in shape created by intentional three-dimensionality expressed as intentional three-dimensional beauty, the confluence of planes and dimensions, as well as of materials and colors. These properties are correlated with Korean ways of viewing the world. This study contributes to the development of Korean designs.

• Korean Journal of Environmental Agriculture
• /
• v.20 no.4
• /
• pp.238-243
• /
• 2001

Mass reduction and physicochemical properties of the produced compost were investigated during composting domestic food wastes without additive. A small composter used in this study had the height of 15 cm from the center of bottom half circle (diameter 24 cm) up to under the lid, the side length of 50 cm and the horizontal lid angle of $50^{\circ}$ and was operated at the heating unit temperature of $85^{\circ}$. It was mixed by the rotating arm for two minutes in every half hour while supplied with air flow at 3 L/min for 10 minutes in every half hour. This condition was found in a preliminary experiment as optimal for keeping the water content of composting material in the optimal range without adding any bulking materials. The domestic food wastes were added into the composter at the rate of 1 kg/day without additives during composting. The results were as follows; during the composting process, water content maintained in the range of $51.0{\sim}53.5%$. Hemicellulose and lignin contents did not show any tendency, but cellulose content decreased. During the composting process, $NH_3-N$ and $NO_2-N$ were not detected due to nitrification. The contents of inorganic compounds did not increase during the composting process. They were in the range of $1.32{\sim}1.71%\;P_2O_5$, $1.29{\sim}1.48%\;CaO$, $0.41{\sim}0.49%\;MgO$, and $0.38{\sim}0.74%\;K_2O$. For 20 days, weight reduction rate was 67.5% in wet basis, and decomposition rate was 48% in dry basis. Concentration of heavy metals (Cu, Cr, Cd, Pb, Zn, Hg, As) was less than the limiting value of the compost. Maturity of the produced compost was 3 grade through reaching maximum temperature of $46{\sim}48^{\circ}C$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8901-8907
• /
• 2015

Conventional streetlight with the not-adjustable light distribution characteristic is generating light pollution such as glare, damage to the crops and disturbed sleep, because beam of streetlight is not distributed evenly according to the surrounding areas and road conditions. In this paper, we proposed the new structure LED streetlight controlled light irradiation angle according to the surrounding areas and road conditions. Proposed LED streetlight are available to the adjustable light distribution characteristic using the half-circle angle control device. Result of measurement and simulation, beam angle is made available to control at least from $100^{\circ}$ up to $154^{\circ}$, average illumination exceeded 15% of KS regulation and overall uniformity exceeded more than 50% of KS regulation. the Developed large capacity LED streetlight luminaire is considered to minimize glare and light pollution and optimize uniformity ratio of illuminance.

• Journal of Korean Society of Forest Science
• /
• v.103 no.2
• /
• pp.248-257
• /
• 2014

The objectives of this study were to identify the root plate dimension of wind-uprooted trees and to analyze the relationship among wind direction, aboveground and belowground properties of the trees. The root plates of 77 Japanese larches (Larix kaempferi) and 24 Korean pines (Pinus koraiensis), which were uprooted by a typhoon in 2012, in the Taehwa Experimental Forest of Seoul National University, Korea, were investigated. The results showed the root plate shape could be assumed to be an oval or a circle in above view, and half an ellipse in side view, respectively. Also, the number and surface area of individual roots in root plates were greater in uprooting direction than in non-uprooting direction. The results of correlation analyses between aboveground and belowground properties indicated DBH had more significant correlation with belowground properties than tree height. Finally, simple linear relationships were derived for significantly correlated tree aboveground and belowground properties.

• Archives of Plastic Surgery
• /
• v.33 no.6
• /
• pp.715-722
• /
• 2006

Purpose: The main advantages of the perforator flap are minimal donor site morbidity, preservation of any main source artery and its thin characteristics. Most perforator flaps for hand reconstruction need primary and secondary procedures such as a flap debulkiness and liposuction etc. However, flap thickness of calf area is thinner than any other perforator flaps. Methods: We performed an anatomical study and clinical application of medial sural artery perforator flap. We found that there are two or more medial sural perforators located on a straight line drawn from the mid-point of popliteal crease to the mid-point of medial malleolus. Most pathway of medial sural artery comes along with this line. It is possible to observe the first perforators almost exactly 8 cm from midpoint of popliteal crease in a distal half circle drawn with a radius of 2 cm. Results: We report 12 cases in 11 patients of hand reconstruction with medial sural perforator free flap from Febrary 2003 to Febrary 2006. Complete healing was possible in 11 cases. Total flap loss for venous insufficiency was in 1 patient. During the follow-up, good contour and full range of motion was observed on hand reconstruction with medial sural perforator free flap. Conclusion: In the authors' experience, this anatomical study made it possible to prepare a diagram of the exact location of the medial sural perforators. This flap can be used to achieve acceptable functional and aesthetic results for hand reconstruction because of its thin characteristics.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.5
• /
• pp.783-795
• /
• 2017

This study measured consumer's recognition, reliability, emotion and images about current eco-marks as well proposed an eco-mark rating scale and mark designs to improve consumer's trust on the fashion product marks. We used a questionnaire survey to collect data from 150 persons about knowledge, interests, and practice on eco fashion products in relation to trustfulness and positive images for three domestic and three international eco-marks. We evaluated and gave eco scores to six fiber-type products (cotton, organic cotton, wool, polyester, biodegradable polyester and nylon) in terms of consumer's use, water & land consumption, waste amount, carbon footprint, and toxicity. We suggested a new 5-level rating scale for eco marks, which quantified the concept of environmental friendliness of fiber products. The design for eco-mark of rating scale showed the total grade with two sub scores of environmental sides and human sides developed with an improved visual understanding for consumers. The design is one through benchmarking the energy-consumption efficiency mark, which is familiar to consumers such as a half circle shape to save environment resources to alarm consumers to environment problems.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.1
• /
• pp.9-25
• /
• 1994

In the present study, the Reynolds-averaged Navier-Stokes equations, together with the equations of the $k-{\varepsilon}$ model of turbulence, were solved numerically in a general body-fitted coordinate system for three-dimensional turbulent flows around the six basic shapes of the magnetically levitated train(MAGLEV). The numerical computations were conducted on the MAGLEV model configurations to provide information on shapes of this type very near the elevated track at a constant Reynolds number of $1.48{\times}10^{6}$ based on the body length. The coordinate system was generated by numerically solving a set of Poisson equations. The convective transport equations were discretized using the finite-analytic scheme which employed analytic solutions of the locally-linearized equations. A time marching algorithm was employed to enable future extensions to be made to handle unsteady and fully-elliptic problems. The pressure-velocity coupling was treated with the SIMPLER-algorithm. Of particular interests were wall effect by the elevated track on the aerodynamic forces and flow characteristics of the six models calculated. The results indicated that the half-circle configuration with extended sides and with smooth curvature of sides was desirable because of the low aerodynamic forces and pitching moment. And it was found that the separation bubble was occured at wake region in near the elevated track.