• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.175-178
• /
• 2004

The stochiometric mixture of evaporating materials for the $ZnIn_2S_4$ single crystal thin film was prepared from horizontal furnace. To obtain the $ZnIn_2S_4$ single crystal thin film, $ZnIn_2S_4$ mixed crystal was deposited on throughly etched semi-insulating GaAs(100) in the Hot Wall Epitaxy(HWE) system. The source and substrate temperature were $610^{\circ}C$ and $450^{\circ}C$, respectively and the growth rate of the $ZnIn_2S_4$ sing1e crystal thin film was about $0.5\;{\mu}m/hr$. The crystalline structure of $ZnIn_2S_4$ single crystal thin film was investigated by photoluminescence and double crystal X-ray diffraction(DCXD) measurement. The carrier density and mobility of $ZnIn_2S_4$ single crystal thin film measured from Hall effect by van der Pauw method are $8.51{\times}10^{17}\;cm^{-3}$, $291\;cm^2/V{\cdot}s$ at $293_{\circ}\;K$, respectively. From the photocurrent spectrum by illumination of perpendicular light on the c - axis of the $ZnIn_2S_4$ single crystal thin film, we have found that the values of spin orbit splitting ${\Delta}S_O$ and the crystal field splitting ${\Delta}Cr$ were 0.0148 eV and 0.1678 eV at $10_{\circ}\; K$, respectively. From the photoluminescence measurement of $ZnIn_2S_4$ single crystal thin film, we observed free excition $(E_X)$ typically observed only in high quality crystal and neutral donor bound exciton $(D^{o},X)$ having very strong peak intensity The full width at half maximum and binding energy of neutral donor bound excition were 9 meV and 26 meV, respectively, The activation energy of impurity measured by Haynes rule was 130 meV.

• 한국자기학회지
• /
• 제5권3호
• /
• pp.216-221
• /
• 1995

자성분말의 보자력$(H_{c})$과 보자력 분포도는 조성 이외의 제조공정인자에 크게 의존하는 값으로 자성분말 제조시 재현성을 결정하는 중요한 물성중의 하나이다. 자성분 말의 자기적 물성을 측정하는 VSM을 이용하여 쉽고 간단하게 보자력 분포도를 측정하는 방법과 그 응용예를 제시하였다. 보자력 분포도 측정은 magnetic hysteresis loop 의 dM/dH 대 H 곡선의 형태와 반치폭에서 얻을 수 있다. dM/dH 곡선 형태가 분리되는 것 없이 반치폭이 작아질수록 보자력 분포도는 더 균일해짐을 나타낸다. 보자력이 다 른 Ba-Ferrite와 ${\gamma}-Fe_{2}O_{3}$ 혼합물 중 Ba-Ferrite의 $H_{c}$가 높아질수록 dM/dH 대 H 곡선 형태는 peak broadening 후 peak splitting으로 나타나며, 이 peak splitting은 혼합자성분말의 $H_{c}$ 차이가 600 Oe 이상일 때 일어난다. 또한 dM/dH 대 H 곡선의 응용으로는 자성분말 보자력 분포도 측정, Ba-Ferrite 구조내로 dopants의 치환 능력 및 ${\alpha}-Fe$의 산화거동을 연구하는데 사용될 수 있다.

• Korea-Australia Rheology Journal
• /
• 제15권3호
• /
• pp.131-150
• /
• 2003

A new numerical algorithm of finite element methods is presented to solve high Deborah number flow problems with geometric singularities. The steady inertialess planar 4 : 1 contraction flow is chosen for its test. As a viscoelastic constitutive equation, we have applied the globally stable (dissipative and Hadamard stable) Leonov model that can also properly accommodate important nonlinear viscoelastic phenomena. The streamline upwinding method with discrete elastic-viscous stress splitting is incorporated. New interpolation functions classified as rational interpolation, an alternative formalism to enhance numerical convergence at high Deborah number, are implemented not for the whole set of finite elements but for a few elements attached to the entrance comer, where stress singularity seems to exist. The rational interpolation scheme contains one arbitrary parameter b that controls the singular behavior of the rational functions, and its value is specified to yield the best stabilization effect. The new interpolation method raises the limit of Deborah number by 2∼5 times. Therefore on average, we can obtain convergent solution up to the Deborah number of 200 for which the comer vortex size reaches 1.6 times of the half width of the upstream reservoir. Examining spatial violation of the positive definiteness of the elastic strain tensor, we conjecture that the stabilization effect results from the peculiar behavior of rational functions identified as steep gradient on one domain boundary and linear slope on the other. Whereas the rational interpolation of both elastic strain and velocity distorts solutions significantly, it is shown that the variation of solutions incurred by rational interpolation only of the elastic strain is almost negligible. It is also verified that the rational interpolation deteriorates speed of convergence with respect to mesh refinement.

• 전기학회논문지P
• /
• 제58권4호
• /
• pp.391-396
• /
• 2009

In this paper, a control algorithm for DC-Link voltage unbalancing compensation of a four-switch inverter for a three-phase BLDC motor drive is proposed. Compared with a conventional six-switch inverter, the split source of the four-switch inverter can be obtained by splitting DC-link capacitor into two capacitors to drive the three phase BLDC motor. The voltages across each of two capacitors are not always equal in steady state because of the unbalance in the impedance of the DC-link capacitors $C_1$ and $C_2$ or the variable current flowed into the capacitor's neutral point in motor control. Despite the unbalance, if the BLDC motor may be run for a long time the voltage across one of the capacitors is more increased. So the unbalance in the capacitors voltages will be accelerated. As a result, The current ripple and torque ripple is increased due to the fluctuation of input current which flows into 3-phase BLDC motor. According to that, the vibration of motor will be increased and the whole system will be instable. This paper presents a control algorithm for DC-Link voltage unbalancing compensation. The sampling from the voltages across each of two capacitors is used to perform the voltage control of DC-Link by using the feedforward controller.

• 한국자기학회지
• /
• 제1권1호
• /
• pp.1-5
• /
• 1991

다결정${(Fe_{2}O_{3})}_{1-x-y}{(In_{2}O_{3})}_{x}{(Eu_{2}O_{3})}_{y}$(x=0.01, y=0.02과 x=0.02, y=0.03)의 자기적 성질을 X선 회절, $M\"{o}ssbauer$ 효과 방법과 자기이력 측정에 의해서 연구하였다. X선 회절결과는 이들 시료의 결정구조는 $\alpha-Fe_{2}O_{3}$와 같음을 보인다. 사중극자 분열과 평균 반폭치 분석으로부터 x=0.01과 y=0.02인 시료는 Morin 전이를 보이며, x=0.02와 y=0.03시료에서 반 강자성 벡타와 결정축[111]사이의 각은 온도의 증가에 따라 약 $35^{\circ}$로부터 (111) 평면에 놓이기 까지 변한다. 초미세 자기장의 온도 의존성은 스핀파 이론을 써서 분석하였다. 상온에서의 이성질체 이동값은 약 0.35mm/s로 이는 시료내의 철의 이온값은 $3^{+}$임을 의미하는 것이다. 이성질체 이동의 온도의존성은 Delbye모형을 써서 분석하였다.

• 콘크리트학회논문집
• /
• 제18권5호
• /
• pp.649-656
• /
• 2006

본 연구에서는 재생 골재 콘크리트의 현장적용성을 높이기 위해 보통 콘크리트에 비해 큰 슬럼프 손실을 개선할 수 있는 분말형 감수제(PSP제)를 개발하였다. 이 PSP제가 혼입된 콘크리트의 유동성 및 역학적 성질들을 평가하기 위하여 재생 굵은골재와 재생 잔골재 혼입조건에 24배합이 실험되었다. 액상형 고성능 감수제를 투입한 콘크리트의 슬럼프는 시간경과와 함께 급격히 감소하며 120분 후에는 초기 슬럼프의 50% 이하로 떨어졌다. 하지만 PSP 제를 혼입한 콘크리트의 슬럼프는 배합 후 30분 까지는 거의 변화가 없으며 1시간 경과 후에도 초기 슬럼프의 85% 이상을 유지하였다. 뿐만 아니라 PSP제는 콘크리트의 압축강도, 할렬인장강도, 휨강도 및 탄성계수들도 향상시켰으며 건조수축 변형률을 감소시켰다. 콘크리트의 성능향상을 고려하였을 때 PSP제의 최적 혼입률은 시멘트 양 대비 5%이었다.

• 한국임상약학회지
• /
• 제29권4호
• /
• pp.231-237
• /
• 2019

Objective: The aim of this study was to analyze the status of split tablet prescription in South Korea. Methods: We conducted this analysis using 2016 National Patient Sample data from the Health Insurance Review and Assessment Service. We computed split tablet prescription rates by sex and age and determined which medicine and medical specialties had the highest split tablet prescribing rates. Results: The proportion of prescriptions that included split tablets was 15.6% (n=6,687,35). The proportion of prescriptions that included split tablets was higher for females (56.7%) than for males (43.3%), while that of prescriptions including split tablets versus total prescriptions for each sex was higher for males (16.4%) than for females (14.9%) (p<0.001). In the age group under 19 years, the proportion of prescriptions including split tablets (53.7%) was more than half of the total. The highest tablet splitting rate was found to be 89.9% for formoterol fumarate (40 ㎍), and pseudoephedrine hydrochloride (60 mg) had the highest number of prescriptions. Pediatrics (65.6%) was the medical field with the highest rate of split tablet prescription. Conclusion: Split tablets were most prescribed to pediatric patients. To minimize the use of split tablets, it is necessary to develop lower dose tablets and establish a policy that promotes prescription of these lower-dose tablets.

• 한국군사과학기술학회지
• /
• 제20권4호
• /
• pp.491-496
• /
• 2017

The hydrogen($H_2$) is promising energy carrier of renewable energy in the microgrid system such as small village and military base due to its high energy density, pure emission and convenient transportation. $H_2$ can be generated by photocatalytic water splitting, gasification of biomass and water electrolysis driven by solar cell or wind turbine. Solid oxide electrolysis cells(SOECs) are the most efficient way to mass production due to high operating temperature improving the electrode kinetics and reducing the electrolyte resistance. The SOECs are consist of nickel-yttria stabilized zirconia(NiO-YSZ) fuel electrode / YSZ electrolyte / lanthanum strontium manganite-YSZ(LSM-YSZ) air electrode due to similarity to Solid Oxide Fuel Cells(SOFCs). The Ni-YSZ most widely used fuel electrode shows several problems at SOEC mode such as degradation of the fuel electrode because of Ni particle's redox reaction and agglomeration. Therefore Ni-YSZ need to be replaced to an alternative fuel electrode material. In this study, We studied on the Double perovskite $PrBrMnO_{5+{\delta}}$(PBMO) due to its high electric conductivity, catalytic activity and electrochemical stability. PBMO was impregnated into the scaffold electrolyte $La_{0.8}Sr_{0.2}Ga_{0.85}Mg_{0.15}O_{3-{\delta}}$(LSGM) to be synthesized at low temperature for avoiding secondary phase generated when it exposed to high temperature. The Half cell test was conducted at SOECs and SOFCs modes.

• 한국동물번식학회:학술대회논문집
• /
• 한국동물번식학회 2001년도 발생공학 국제심포지움 및 학술대회 발표자료집
• /
• pp.37-43
• /
• 2001

1. About fifty thousand of cattle embryos were transferred and 16000 ET-calves were born in 1999. Eighty percents of embryos were collected from Japanese Black beef donors and transferred to dairy Holstein heifers and cows. Since 1985, we have achieved in bovine in vitro fertilization using immature oocytes Collected from ovaries of slaughterhouse. Now over 8000 embryos fertilized by Japanese Black bull, as Kitaguni 7 -8 or Mitsufuku, famousbulls as high marbling score of progeny tests were sold to dairy farmers and transferred to their dairy cattle every year. 2. Embryo splitting for identical twins is demonstrated an useful tool to supply a bull for semen collection and a steer for beef performance test. According to the data of Dr.Hashiyada (2001), 296 pairs of split-half-embryos were transferred to recipients and 98 gave births of 112 calves (23 pairs of identical twins and 66 singletons). 3. A blastomere-nuclear-transferred cloned calf was born in 1990 by a joint research with Drs.Tsunoda, National Institute of Animal Industry (NIAI) and Ushijima, Chiba Prefectural Farm Animal Center. The fruits of this technology were applied to the production of a calf from a cell of long-term-cultured inner cell mass (1998, Itoh et al, ZEN-NOH Central Research Institute for Feed and Livestock) and a cloned calf from three-successive-cloning (1997, Tsunoda et al.). According to the survey of MAFF of Japan, over 500 calves were born until this year and a half of them were already brought to the market for beef. 4. After the report of "Dolly", in February 1997, the first somatic cell clone female calves were born in July 1998 as the fruits of the joint research organized by Dr. Tsunoda in Kinki University (Kato et al, 2000). The male calves were born in August and September 1998 by the collaboration with NIAI and Kagoshima Prefecture. Then 244 calves, four pigs and a kid of goat were now born in 36 institutes of Japan. 5. Somatic cell cloning in farm animal production will bring us an effective reproductive method of elite-dairy- cows, super-cows and excellent bulls. The effect of making copy farm animal is also related to the reservation of genetic resources and re-creation of a male bull from a castrated steer of excellent marbling beef. Cloning of genetically modified animals is most promising to making pig organs transplant to people and providing protein drugs in milk of pig, goat and cattle.

• 한국결정성장학회지
• /
• 제11권4호
• /
• pp.138-147
• /
• 2001

수평 전기로에서 $ZnIn_{2}S_{4}$ 다결정을 합성하여 HWE(Hot Wall Epitaxy)방법으로 $ZnIn_{2}S_{4}$ 단결정 박막을 반절연성 GaAs(100) 기판 위에 성장시겼다. $ZnIn_{2}S_{4}$ 단결정 박막은 증발원의 온도를 $610^{\circ}C$, 기판의 온도를 $450^{\circ}C$로 성장시켰고 성장 속도는 0.5$\mu\textrm{m}$/hr로 확인되었다. $ZnIn_{2}S_{4}$ 단결정 박막의 결정성의 조사에서 $10^{\circ}$K에서 광발광 (photoluminescence) 스펙트럼이 433nm (2.8633 eV)에서 exciton emission 스펙트럼이 가장 강하게 나타났으며, 또한 이중결정 X-선 요동곡성 (DCRC)의 반폭치(FWHM)도 133 arcsec로 가장 작아 최적 성장 조건임을 알 수 있었다. Hall 효과는 van der Pauw 방법에 의해 측정되었으며, 온도에 의존하는 운반자 농도와 이동도는 $293^{\circ}$K에서 각각 $8.51{\times}10^{17}electron{\textrm}{cm}^{-3}$, 291$\textrm{cm}^2$/V-s 였다. $ZnIn_{2}S_{4}$ 단결정 박막의 광전류 단파장대 봉우리들로부터 $10^{\circ}$K에서 측정된 ${\Delta}$Cr(crystal field splitting)은 0.1678 eV, ${\Delta}$So (spin orbit coupling)는 0.0148eV였다. $10^{\circ}$K의 광발광 측정으로부터 고품질의 결정에서 볼 수 있는 free exciton 과 매우 강한 세기의 중성 주개 bound exciton 등의 피크가 관찰되었다. 이때 증성 주개 bound exciton 의 반치폭과 결합 에너지는 각각 9meV와 26meV였다. 또한 Haynes rule에 의해 구한 불순물의 활성화 에너지는 130meV였다.