• The Korean Journal of Pesticide Science
• /
• v.18 no.3
• /
• pp.123-129
• /
• 2014

The present work was aimed to determine the pre-harvest residue limits (PHRLs) and the safety management of commonly used pesticides namely buprofezin and penthiopyrad on oriental melon (Cucumis melon var. makuwa). In this study, the buprofezin (diluted two thousand fold) and penthiopyrad (diluted four thousand fold) were sprayed single time on oriental melon in the cultivation areas Sangju (site 1) and Sungju (site 2). Oriental melon were randomly collected from the both areas at the end of 0 (2 hours after pesticides spaying), 1, 2, 3, 5, 7, 9 and 10 days. For analysis, each samples were partitioned twice (80 and 70 mL) with dichloromethane and purified by florisil SPE cartridge. Finally, the residual amounts of both pesticides in all samples were analyzed using gas chromatography/nitrogen phosphorus detector (GC/NPD). In this study, the method limit of quantification (MLOQ) for both buprofezin and penthiopyrad in oriental melon was found to be $0.01mg\;kg^{-1}$ and their recovery levels were 91.1~98.6% and 90.0~104.6%, respectively. Further, the calculated biological half-life for buprofezin and penthiopyrad in oriental melon were 3.9 and 3.5, and 3.0 and 2.7 days in site 1 and 2, respectively. The results of this study found that the PHRLs for buprofezin and penthiopyrad were 4.24 and $2.31mg\;kg^{-1}$, respectively at 10 days before harvest. Consequently, the present study suggest that the residual amounts of both pesticides will be lower than the maximum residue limits (MRLs) when oriental melon is harvested.

• Journal of Animal Science and Technology
• /
• v.51 no.4
• /
• pp.337-342
• /
• 2009

The feasibility of reutilization of magnesium ammonium phosphate (MAP) or struvite slurry recovered from the process through microwave irradiation was studied in this experiment. For this purpose, 4 different operations were performed with or without Mg source addition and different levels of MAP recycled in a batch reactor. Dissolution rate of MAP, ${NH_4}^+$ elimination pattern and physicochemical changes of MAP during microwave irradiation were also studied. The result showed that only 33% orthophosphate ($PO_4-P$) and 27% $NH_4-N$ removal occurred without adding any external Mg source (run A), whereas 87% $PO_4-P$ and 40% $NH_4-N$ removed when 1.0 M ratio of $MgCl_2$ (run B) was added based on $PO_4-P$ in influent. Although the addition of 1.0 molar ratio of microwave irradiated MAP (Run C) removed lower $PO_4-P$ and $NH_4-N$ than 1.0 M $MgCl_2$ (run B), $PO_4-P$ removal was double when compared with no Mg addition (run A). Addition of half MAP and half $MgCl_2$ (run D) showed the similar removal efficiency (88% $PO_4-P$ and 35% $NH_4-N$) with sole $MgCl_2$ addition (run B). Based on these results, the reutilization of MAP irradiated by microwave would be a feasible way to enhance the removal efficiencies of N and P, as well as curtail the Mg chemical usage. Track study showed that $NH_4-N$ gradually increased at initial stage of microwave irradiation of MAP, and then started eliminating from liquor as temperature increased over $45^{\circ}C$. Dissolution rate of ${PO_4}^{-3}$ during microwave irradiation was proportional to the initial MAP concentration, having $0.0091x^{0.6373}$ mg/sec. It was found from the scanning electron microscope (SEM) study that physical structure of MAP crystal started breaking down into small cube granules within very short time by electromagnetic vibration force during microwave irradiation and then gradually melted down into solution.

• Journal of Global Scholars of Marketing Science
• /
• v.20 no.3
• /
• pp.239-248
• /
• 2010

This paper describes a collaborative project between academia and industry which focused on improving the marketing and product development strategies for two private label apparel brands of a large regional department store chain in the southeastern United States. The goal of the project was to revitalize product lines of the two brands by incorporating student ideas for new solutions, thereby giving the students practical experience with a real-life industry situation. There were a number of key players involved in the project. A privately-owned department store chain based in the southeastern United States which was seeking an academic partner had recognized a need to update two existing private label brands. They targeted middle-aged consumers looking for casual, moderately priced merchandise. The company was seeking to change direction with both packaging and presentation, and possibly product design. The branding and product development divisions of the company contacted professors in an academic department of a large southeastern state university. Two of the professors agreed that the task would be a good fit for their classes - one was a junior-level Intermediate Brand Management class; the other was a senior-level Fashion Product Development class. The professors felt that by working collaboratively on the project, students would be exposed to a real world scenario, within the security of an academic learning environment. Collaboration within an interdisciplinary team has the advantage of providing experiences and resources beyond the capabilities of a single student and adds "brainpower" to problem-solving processes (Lowman 2000). This goal of improving the capabilities of students directed the instructors in each class to form interdisciplinary teams between the Branding and Product Development classes. In addition, many universities are employing industry partnerships in research and teaching, where collaboration within temporal (semester) and physical (classroom/lab) constraints help to increase students' knowledge and experience of a real-world situation. At the University of Tennessee, the Center of Industrial Services and UT-Knoxville's College of Engineering worked with a company to develop design improvements in its U.S. operations. In this study, Because should be lower case b with a private label retail brand, Wickett, Gaskill and Damhorst's (1999) revised Retail Apparel Product Development Model was used by the product development and brand management teams. This framework was chosen because it addresses apparel product development from the concept to the retail stage. Two classes were involved in this project: a junior level Brand Management class and a senior level Fashion Product Development class. Seven teams were formed which included four students from Brand Management and two students from Product Development. The classes were taught the same semester, but not at the same time. At the beginning of the semester, each class was introduced to the industry partner and given the problem. Half the teams were assigned to the men's brand and half to the women's brand. The teams were responsible for devising approaches to the problem, formulating a timeline for their work, staying in touch with industry representatives and making sure that each member of the team contributed in a positive way. The objective for the teams was to plan, develop, and present a product line using merchandising processes (following the Wickett, Gaskill and Damhorst model) and develop new branding strategies for the proposed lines. The teams performed trend, color, fabrication and target market research; developed sketches for a line; edited the sketches and presented their line plans; wrote specifications; fitted prototypes on fit models, and developed final production samples for presentation to industry. The branding students developed a SWOT analysis, a Brand Measurement report, a mind-map for the brands and a fully integrated Marketing Report which was presented alongside the ideas for the new lines. In future if the opportunity arises to work in this collaborative way with an existing company who wishes to look both at branding and product development strategies, classes will be scheduled at the same time so that students have more time to meet and discuss timelines and assigned tasks. As it was, student groups had to meet outside of each class time and this proved to be a challenging though not uncommon part of teamwork (Pfaff and Huddleston, 2003). Although the logistics of this exercise were time-consuming to set up and administer, professors felt that the benefits to students were multiple. The most important benefit, according to student feedback from both classes, was the opportunity to work with industry professionals, follow their process, and see the results of their work evaluated by the people who made the decisions at the company level. Faculty members were grateful to have a "real-world" case to work with in the classroom to provide focus. Creative ideas and strategies were traded as plans were made, extending and strengthening the departmental links be tween the branding and product development areas. By working not only with students coming from a different knowledge base, but also having to keep in contact with the industry partner and follow the framework and timeline of industry practice, student teams were challenged to produce excellent and innovative work under new circumstances. Working on the product development and branding for "real-life" brands that are struggling gave students an opportunity to see how closely their coursework ties in with the real-world and how creativity, collaboration and flexibility are necessary components of both the design and business aspects of company operations. Industry personnel were impressed by (a) the level and depth of knowledge and execution in the student projects, and (b) the creativity of new ideas for the brands.

• Journal of Pharmaceutical Investigation
• /
• v.39 no.1
• /
• pp.73-78
• /
• 2009

A simple LC-MS/MS method of rabeprazole in human plasma was developed and validated. Rabeprazole and Internal standard (I.S), omeprazole, were extracted from human plasma by liquid liquid extraction, chromatographic separation of rabaprazole in plasma was achieved at $45^{\circ}C$ with a Shiseido UG120 $C_{18}$ column and methanol-10 mM ammonium acetate buffer (pH 9.42 with ammonium water), as mobile phase. Rabeprazole produced a protonated precursor ion [$(M+H)^+$] at m/z 360.10 and corresponding product ion at m/z 242.21. Internal standard produced a protonated precursor ion [$(M+H)^+$] at 346.09 and corresponding product ion at m/z 198.09. This method showed linear response over the concentration range of $1{\sim}500\;ng/mL$ with correalation coefficient greater than 0.99. The lower limit of quantitation (LLOQ) using 0.2 mL plasma was 1 ng/mL, which was sensitive enough for pharmacokinetics studies. The method was specific and validated with a limit of quantitation of 1 ng/mL. The intra-day and inter-day precision and accuracy were acceptable for all samples including the LLOQ. The applicability of the method was demonstrated by analysis of plasma after administration of a single 10 mg dose to 36 healthy subject. From the plasma rabeprazole concentration versus time curves, the mean $AUC_t$ (The area under the plasma concentration-time curve from time 0 to 12 hr ) was $691.36{\pm}321.88\;ng{\cdot}hr/mL$, $C_{max}$ (maximum plasma drug concentration) of $353.21{\pm}131.52\;ng/mL$ reached $3.4{\pm}1.1\;hr$ after adiministration. The mean biological half-life of rabeprazole was $1.37{\pm}0.75\;hr$. Based on the results, this simple method could readily be used in pharmacokinetics studies.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.4
• /
• pp.281-291
• /
• 2013

A hypothetical repository was assumed to be located at the KURT (KAERI Underground Research Tunnel) site, and the travel times of radionuclides released from three source positions were calculated. The groundwater flow around the KURT site was simulated and the groundwater pathways from the hypothetical source positions to the shallow groundwater were identified. Of the pathways, three pathways were selected because they had highly water-conductive features. The transport travel times of the radionuclides were calculated by a TDRW (Time-Domain Random Walk) method. Diffusion and sorption mechanisms in a host rock matrix as well as advection-dispersion mechanisms under the KURT field condition were considered. To reflect the radioactive decay, four decay chains with the radionuclides included in the high-level radioactive wastes were selected. From the simulation results, the half-life and distribution coefficient in the rock matrix, as well as multiple pathways, had an influence on the mass flux of the radionuclides. For enhancing the reliability of safety assessment, this reveals that identifying the history of the radionuclides contained in the high-level wastes and investigating the sorption processes between the radionuclides and the rock matrix in the field condition are preferentially necessary.

• Korean Journal of Environmental Agriculture
• /
• v.11 no.3
• /
• pp.209-214
• /
• 1992

Residue of Propineb in Sesame(Sesamum indicum L.) seed was determined to establish an index for the safety use of Propineb to Sesame. Evaluation was made on residual concentration of Propineb in Sesame seed as a function of application frequency and date when the mixed formulations of Propineb(56%), protectant fungicide, and Oxadixyl(8%), contact fungicide, were sprayed into Sesame leaves. Level of Propineb treatment was $0.028g/m^2$ with various combinations of application time from three to sixty days before harvest. Results are summarized as followings. 1. Recovery percentages of Propineb from Sesame seed were ranged from 84 to 96, and the minimum detectable limit of Propineb with the method employed in this experiment was 0.03mg/kg. 2. Residues of Propineb in Sesame seed were in the ranges of 0.14 to 1.38mg/kg, varying with frequency and date of Propineb application. 3. Residues of Propineb increased as increasing application frequency of Propineb or as being application date closer to harvest time. 4. Residue of Propineb in Sesame seed was decreased with time, showing to be fitted to the first-order kinetics. 5. Residues of Propineb in Sesame seen were, irresepective of treatments, lower than 2mg/kg, the Maximum Residue Limit(MRL) established by FAO/WHO. 6. Half-life of Propineb determined in this experiment was ranged from 12 to 16 days.

• The Journal of Korean Medicine
• /
• v.24 no.2
• /
• pp.166-178
• /
• 2003

Objectives : Nitric oxide (NO) plays an important role in normal and pathophysiological cells as a messenger molecule, neurotransmitter, microbiological agent, or dilator of blood vessels and arteriosclerosis, respectively. This study was undertaken to understand the mechanism of NO production and effect of Hyeolbuchukeo-tang (Xiefuzhuyu-tang) on NO production in cultured vascular smooth muscle cell (VSMC). Methods and Results : VSMC was isolated from aorta and cultured. Cultured primary cells were identified as VSMC with anti--smooth muscle actin antibody. A large amount of NO was produced in cultured VSMC treated with $IFN-{\gamma}$ plus TNF in a time- and dose-dependent manner. $TNF-{\alpha}$ was a more efficient stimulator than $IFN-{\gamma}$ in NO production of cultured VSMC. iNOS protein wasdetected within 3 hrs and it increased up to 12 hrs in a time-dependent manner. However, accumulated NO in cytokine-treated VSMC was not detected within 3 hrs. NO production in cytokine-treated VSMC showed the dose- and time-dependent manner, and increased up to 48 hrs. The activated VSMC produced a large amount of NO (about 60 uM). Hyeolbuchukeo-tang (Xiefuzhuyu-tang) alone did not induceNO production, but it potentiated the effect of $TNF-{\alpha}$ on NO production and increased NO production by about 20%. Hyeolbuchukeo-tang (Xiefuzhuyu-tang) did not affect the transcriptional activity of iNOS gene, but increased the accumulation of iNOS. These results indicate that Hyeolbuchukeo-tang (Xiefuzhuyu-tang) could modulate the translational level of iNOS. PKC did not modulate NO production, but calcium ionophore A23187 decreased NO production. However, Hyeolbuchukeo-tang (Xiefuzhuyu-tang) elevated the decreased NO production in A23187-treated VSMC by modulating the stability of iNOS transcripts. Half-life of the synthesized transcripts appeared to have about 6 hrs. PDTC, an $NF-{\kappa}B$ inhibitor, blocked the accumulation of iNOS mRNA, indicating that $NF-{\kappa}B$ served as an important modulator in the transcriptional regulation of iNOS. As Hyeolbuchukeo-tang (Xiefuzhuyu-tang) potentiated the effect of the $TNF-{\alpha}$ on NO production but had no additional effect on PDTC-modulated NO production, it is suggested that Hyeolbuchukeo-tang (Xiefuzhuyu-tang) enhances the $TNF-{\alpha}-mediated$ NO production of VSMC by modulating the iNOS activity and the stability of iNOS transcripts in activated VSMC having the elevated intracellular calcium ion. Conclusions : This study suggests that Hyeolbuchukeo-tang (Xiefuzhuyu-tang) has a potential capacity for preventing and treating diseases of the circulation system, including arteriosclerosis.

• Korean Journal of Clinical Pharmacy
• /
• v.12 no.2
• /
• pp.91-95
• /
• 2002

The pharmacokinetics of intravenous paclitaxel (1 mg/kg) were investigated in rabbits with renal failure induced by folic acid. The area under the plasma concentration-time curve from time zero to time infinity (AUC) of paclitaxel was significantly (p<0.05) greater in rabbits with severe renal failure induced by folic acid $(1030\pm382)$ compared to that in rabbits with in moderate renal failure induced by folic acid $(780\pm209\;ng/ml{\cdot}hr)$. The apparent volume of distribution (Vd) $(0.008\pm0.002\;L/kg)$ and the elimination rate constant $(\beta)\;(0.09\pm0.025\;hr^{-1})$ of paclitaxel in rabbits with severe renal failure were significantly (p<0.05) smaller and slower respectively than those of control rabbits $(0.016\pm0.004\;L/kg,\;0.12\pm0.03\;hr^{-1})$, but not significantly different compared with that in rabbits with moderate renal failure $(0.010\pm0.003\;L/kg,\;0.10\pm0.026\;hr^{-1})$. total body clearance (CL) of paclitaxel in rabbits with severe renal failure $(0.97\pm0.183\;L/hr/kg)$ was significantly (p<0.05) slower than that in control rabbits $(1.68\pm0.440\;L/hr/kg)$, but not significantly different compared with that in rabbits with in moderate renal failure $(1.28\pm0.311\;L/hr/kg)$. The terminal half-life ($t_{1/2}$) of paclitaxel in rabbits with severe renal failure $(7.46\pm2.16\;hr)$ was significantly (p<0.05) longer than that in control rabbits $(5.75\pm1.44\;hr)$, but not significantly different compared to that in rabbits with moderate renal failure rabbits $(6.67\pm1.76\;hr)$. The above data could be at least partly decrease in due to paclitaxel excretion in rabbits with renal failure, since $7-15\%$ of interavenous paclitaxel was excreted via kidney as unchanged forms plus its metablites.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.4
• /
• pp.136-143
• /
• 2016

There are various method for evaluating the durability life of concrete structures due to salt damage. The best way is to perform a corrosion test for a rebar embedded in concrete specimen was exposure to marine environment. However, this method has the disadvantage that it takes a long period of time. Also, accelerated corrosion test which was complemented complements the time-consuming weakness is limited to apply because it could not reveal a correlation between long-term exposure test. Accordingly, the purpose of this study is to derive a correlation coefficient between cycle drying-wetting accelerated corrosion test and long-term exposure test. Corrosion initiation time was measured in four types of concrete samples, i.e., two samples mixed with fly ash(FA) and blast furnace slag(BS), and the other two samples having two water/cement ratio(W/C = 0.6, 0.35) without admixture(OPC 60 and OPC 35). The accelerated corrosion test was carried out by two case, i.e., one is a cyclic drying-wetting method(case 1), and the other is a artificial seawater ponding test method(case 2). Whether corrosion occurs, it was measures using half-cell potential method. The results indicated that case 1 is to accelerated the corrosion of rebar about 24~36% as compared with case 2, then the corrosion of rebar embedded in concrete occurred according to the order of OPC60, FA, BS, OPC35. Correlation coefficient between accelerated corrosion test and long-term exposure test, case 1 is 4.23 to 5.42, and case 2 is 6.54 to 7.82.

• Journal of Korean Academy of Nursing
• /
• v.23 no.3
• /
• pp.467-486
• /
• 1993

Today, more chronically ill and handicapped people are being cared for at home by a family member caregiver. The task of caring for a family momber may mean that the caregiver has less time and money and more work which may result in increased fatigue and symptoms of illness. This study was done to examine the well-being of family caregivers. Fifty three family caregivers were interviewed. Concepts were measured using existing tools and included : Burden(25 item 5 point scale), Social sup-port (21 item 7 point scale), Health status defined by a symptom checklist(48 item S point scale), and Well -being defined by a quality of life scale (14 item 7 point scale) and caregiving activities. Data collection was done by interview and Q-sort. Social support and well - being were positively correlated as were symptoms and burden. Symptoms and burden were negatively correlated with social support and well-being. Items on the quality of life scale had a mean score range from 3.09 to 4.96. Quality of life related to income was lowest (3.09) but the desire to use more money for the patient was rated 2.90 on the burden scale where the item means ranged from 0.73 to 3.55. The high mean of 3.55 was for obligation to give care and the low 0.73 was (or not feeling that this was helping the patient. Mean scores for symptoms ranged from 0.26 to 2.15 with the 2.15 being for “worry about all the things that have to be done.” Over half of the patients were dependent for help with some activities of daily living. The caregivers reported doing an average of 3.40 out of five patient care activities including bathing (77.4%), shampooing (67.9%), and washing face and hands (49.1％), and 3.74 out of seven home maintenance activities including laundry (98.1％), cooking (83.0%), and arranging bed-ding(75.5%). The caregivers reported their spouse as one of the main sources of social support, including in times of loneliness and anger The mean score for loneliness as burden was 2.15 and ranked fourth and 31 (58.5％) of the sample reported being lonely recently and not being satisfied with the support received. Similarly anger caused by the patient was given a mean score of 2.13, and anger was reported to have been present recently by 38 (71.7%) of the sample and satis-faction with the support given was low. Having someone to help deal with anger ranked twelfth out of 21 items on the social support scale and had a mean score of 3.98 (range 3.49 to 5.98). Spouses were reported as a major source of social support but the fact that 50% of the caregivers were caring for a spouse, may account for the quality of this source of social support having been affected. These caregivers faced the same problems as others at the same stage of life. but because of the situation, there was a strain on their resources, particularly financial and social. In conclusion it was found that burden is correlated negatively to quality of life and positively to symptoms, but in this sample, symptoms and bur-den were scored relatively low. Does this indicate that the caregivers accept caregiving as part of their destiny and accept the quality of their lives with burden and symptoms just being a part of caregiving\ulcorner Does the correlation between the bur-den and symptoms indicate they are a measure of the same phenomenon or that the sample was of a more mobile, less burdened group of caregivers\ulcorner Quality of life was the one variable that was significant in explaining the varience on burden. Further study is needed to validate the conclusions found in this study but they indicate a need for nurses to ap-proach these caregivers with a plan tailored to each individual situation and to give consideration to interventions directed at improving quality of life and expanding social support networks for those caring for spouses.